Mouseover to Zoom

Vantage S-Series

For professionals who want stand-on maneuverability and traction. And Exmark quality.
Not surprisingly, the difference between our stand-on mowers and the competition’s starts with the operator platform. Vantage Series mowers feature a large, rubber padded platform with weight-compensating suspension that allows the operator to easily and comfortably shift his weight on hills for maximum control and maneuverability. Our patented thigh pads also comfortably conform to the operator’s legs without interfering when the platform is folded up for storage, trailering or converting the Vantage to a walk-behind.

Patented Mechanical Control System

Now with Propane

Adjustable Front Reference Bar

Zero-Maintenance Spindles

Operator Platform

Hydro-Drive

Model Specs


Specifications for model # VTS541CKA36300

Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Twin levers with no-tools adjustable front reference bar to modify forward ground speed.
Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires.
Drive Tires 18 x 8.5-8 Kenda Tires
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 15-amp alternator.
Cup Holder Optional
Casters .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Power Components
Engine Brand Kawasaki®
Engine Model FS541V
Engine Type Carbureted
Engine Series V-Twin
Engine Speed 3,600 rpm
Engine Displacement 603
Air Filter Standard Engine Manufacturer's air filter
Drive Description Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors.
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 175 ft-lb clutch
Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location.
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Standard; mechanical lift-assist springs.
Carb Compliant Yes
Fuel Type Gas Carbureted
Decks
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 36"
Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Blades 2 Blades at 18" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions
Width 48.0 in. (121.9 cm)
Length 74 in. (188 cm)
Height 50 in. (127 cm)
Curb Weight 790

Specifications for model # VTS691CKA48400

Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Twin levers with no-tools adjustable front reference bar to modify forward ground speed.
Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires.
Drive Tires 20 x 10.50-8 Kenda Tires
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 15-amp alternator.
Cup Holder Optional
Casters .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Power Components
Engine Brand Kawasaki®
Engine Model FX691V
Engine Type Carbureted
Engine Series V-Twin
Engine Speed 3,600 rpm
Engine Displacement 726
Air Filter Standard Engine Manufacturer's air filter
Drive Description Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors.
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 200 ft-lb clutch
Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location.
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Standard; mechanical lift-assist springs.
Carb Compliant Yes
Fuel Type Gas Carbureted
Decks
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 48"
Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Blades 3 Blades at 16.25" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions
Width 59.6 in. (151.4 cm)
Length 74 in. (188 cm)
Height 50 in. (127 cm)
Curb Weight 855

Specifications for model # VTS691CKA52400

Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Twin levers with no-tools adjustable front reference bar to modify forward ground speed.
Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires.
Drive Tires 20 x 10.50-8 Kenda Tires
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 15-amp alternator.
Cup Holder Optional
Casters .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Power Components
Engine Brand Kawasaki®
Engine Model FX691V
Engine Type Carbureted
Engine Series V-Twin
Engine Speed 3,600 rpm
Engine Displacement 726
Air Filter Standard Engine Manufacturer's air filter
Drive Description Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors.
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 200 ft-lb clutch
Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location.
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Standard; mechanical lift-assist springs.
Carb Compliant Yes
Fuel Type Gas Carbureted
Decks
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Blades 3 Blades at 18" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions
Width 64.8 in. (164.6 cm)
Length 74 in. (188 cm)
Height 50 in. (127 cm)
Curb Weight 866

Specifications for model # VTS730AKC52400

Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires.
Drive Tires 20 x 10.50-8 Kenda Tires
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 20-amp alternator.
Cup Holder Optional
Casters .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Power Components
Engine Brand Kohler®
Engine Model ECV730
Engine Type Electronic Fuel Injected
Engine Series Command™ EFI
Engine Speed 3,600 rpm
Engine Displacement 747
Air Filter Heavy-duty canister air filtration system
Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors.
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 200 ft-lb clutch
Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location.
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Standard; mechanical lift-assist springs.
Carb Compliant Yes
Fuel Type Gas EFI
Decks
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Blades 3 Blades at 18" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions
Width 64.8 in. (164.6 cm)
Length 74 in. (188 cm)
Height 50 in. (127 cm)
Curb Weight 866

Specifications for model # VTS740EKC60400

Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Twin levers with no-tools adjustable front reference bar to modify forward ground speed.
Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires.
Drive Tires 20 x 10.50-8 Kenda Tires
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 20-amp alternator.
Cup Holder Optional
Casters .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Power Components
Engine Brand Kohler®
Engine Model ECV740
Engine Type Electronic Fuel Injected
Engine Series Command™ EFI
Engine Speed 3,600 rpm
Engine Displacement 747
Air Filter Heavy-duty canister air filtration system
Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors.
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 200 ft-lb clutch
Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location.
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Standard; mechanical lift-assist springs.
Carb Compliant No
Fuel Type Gas EFI
Decks
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Blades 3 Blades at 20.50" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions
Width 72.8 in. (184.9 cm)
Length 74 in. (188 cm)
Height 50 in. (127 cm)
Curb Weight 883

Specifications for model # VTS740PKC52400

Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Twin levers with no-tools adjustable front reference bar to modify forward ground speed.
Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires.
Drive Tires 21 x 10.50-8 Kenda Tires
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 20-amp alternator.
Cup Holder Optional
Casters .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Power Components
Engine Brand Kohler®
Engine Model PCV740
Engine Type EFI Propane
Engine Series Command™ EFI Propane
Engine Speed 3,600 rpm
Engine Displacement 747
Air Filter Heavy-duty canister air filtration system
Drive Description Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors.
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 200 ft-lb clutch
Fuel Capacity 33.5-lb propane tank
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Standard; mechanical lift-assist springs.
Carb Compliant Yes
Fuel Type Propane EFI
Decks
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Blades 3 Blades at 18" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions
Width 64.8 in. (164.6 cm)
Length 75 in. (188 cm)
Height 51 in. (127 cm)
Curb Weight 885

Specifications for model # VTS740PKC60400

Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires.
Drive Tires 20 x 10.50-8 Kenda Tires
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 20-amp alternator.
Cup Holder Optional
Casters .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Power Components
Engine Brand Kohler®
Engine Model PCV740
Engine Type EFI Propane
Engine Series Command™ EFI Propane
Engine Speed 3,600 rpm
Engine Displacement 747
Air Filter Heavy-duty canister air filtration system
Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors.
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 200 ft-lb clutch
Fuel Capacity 33.5-lb propane tank
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Standard; mechanical lift-assist springs.
Carb Compliant Yes
Fuel Type Propane EFI
Decks
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Blades 3 Blades at 20.50" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions
Width 72.8 in. (184.9 cm)
Length 74 in. (188 cm)
Height 50 in. (127 cm)
Curb Weight 893

Accessories


Accessories for model # VTS541CKA36300

COVER, EXMARK LARGE RIDER

WEIGHT KIT, FRONT

KIT, TRASH HOLDER

KIT, LIGHT VANTAGE

KIT-MULCH, 36V

KIT-JACK MOUNT, VANTAGE 3

KIT-ANTI SCALP, VT36

KIT-ADAPTER, ACCESSORY 36 (Use with GC3602)

OCD, HAND

KIT, CUP HOLDER

CATCHER-SIDE MOUNT

KIT, JACK

Accessories for model # VTS691CKA48400

COVER, EXMARK LARGE RIDER

WEIGHT KIT, FRONT

KIT, TRASH HOLDER

KIT, LIGHT VANTAGE

KIT, JACK MOUNT

KIT, VT ANTI-SCALP

OCD, HAND

KIT, CUP HOLDER

KIT,MULCH 486

CATCHER-SIDE MOUNT

KIT, JACK

Accessories for model # VTS691CKA52400

COVER, EXMARK LARGE RIDER

WEIGHT KIT, FRONT

KIT, TRASH HOLDER

KIT, LIGHT VANTAGE

KIT, JACK MOUNT

KIT, VT ANTI-SCALP

OCD, HAND

KIT, CUP HOLDER

KIT,MULCH 526

CATCHER-SIDE MOUNT

KIT, JACK

Accessories for model # VTS730AKC52400

COVER, EXMARK LARGE RIDER

WEIGHT KIT, FRONT

KIT, TRASH HOLDER

KIT, LIGHT VANTAGE

KIT, JACK MOUNT

KIT, VT ANTI-SCALP

OCD, HAND

KIT, CUP HOLDER

KIT,MULCH 526

CATCHER-SIDE MOUNT

KIT, JACK

Accessories for model # VTS740EKC60400

COVER, EXMARK LARGE RIDER

WEIGHT KIT, FRONT

KIT, TRASH HOLDER

KIT, LIGHT VANTAGE

KIT, JACK MOUNT

KIT, NLZ 60 REAR ANTI SCALP

OCD, HAND

KIT, CUP HOLDER

KIT,MULCH 606

CATCHER-SIDE MOUNT

KIT, JACK

Accessories for model # VTS740PKC52400

COVER, EXMARK LARGE RIDER

WEIGHT KIT, FRONT

KIT, TRASH HOLDER

KIT, LIGHT VANTAGE

KIT, JACK MOUNT

OCD, HAND

KIT, CUP HOLDER

KIT,MULCH 526

KIT, JACK

KIT, VT ANTI-SCALP

CATCHER-SIDE MOUNT

ASM-ADAPTER GC3602

Accessories for model # VTS740PKC60400

COVER, EXMARK LARGE RIDER

WEIGHT KIT, FRONT

KIT, TRASH HOLDER

KIT, LIGHT VANTAGE

KIT, JACK MOUNT

OCD, HAND

KIT, CUP HOLDER

KIT,MULCH 606

KIT, JACK

CATCHER-SIDE MOUNT

ASM-ADAPTER GC3602

KIT, NLZ 60 REAR ANTI SCALP

Warranty


We have you covered. We take great pride in the quality of our products and stand behind every single one. You can view, download, or print the warranty statement for your equipment here.

Reviews


REVIEW SNAPSHOT®

by PowerReviews
ExmarkVantage S-Series
 
4.7

(based on 23 reviews)

Ratings Distribution

  • 5 Stars

     

    (16)

  • 4 Stars

     

    (7)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Steering / controllability (21)
  • Cut quality (20)
  • Heavy duty construction (18)
  • Zero-turning radius (17)
  • Ease of use (15)

Cons

  • Lack of speed (5)
  • Difficult maintenance (4)
  • Limited availability & performance of accessories (3)

Best Uses

  • Professional / commercial mowing (20)
  • Small lawns (less than 1 acre) (13)
  • Striping (12)
  • Medium lawns (1-2 acres) (10)
  • Mulching (9)
    • Engine Brand?:
    • Kawasaki (12), Kohler (5)
    • Deck Size?:
    • 52" (7), 60" (3)
    • Reviewer Profile:
    • Landscape professional (22), Homeowner (4)
    • Personal or Professional Use?:
    • Professional (22), Personal (4)

Reviewed by 23 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

I would suggest mower.

By 

from Wichita, KS

About Me Landscape Professional

Verified Buyer

Pros

  • Cut Quality
  • Heavy Duty Construction

Cons

    Best Uses

    • Professional / Commercial Mowing

    Comments about Exmark Vantage S-Series:

    The mower has exceeded all expectations. This will not be the last one we purchase.

     
    5.0

    Versatility!

    By 

    from Fort Wayne, IN

    About Me Landscape Professional

    Verified Buyer

    Pros

    • Cut Quality
    • Ease of Use
    • Steering / Controllability
    • Zero-Turning Radius

    Cons

    • Limited Availability & Performance of Accessories

    Best Uses

    • Medium Lawns (1-2 acres)
    • Professional / Commercial Mowing
    • Residential Mowing
    • Small Lawns (Less than 1 acre)
    • Striping

    Comments about Exmark Vantage S-Series:

    I appreciate that these machines are so versatile. Hills are a non issue. Easily maneuverable around obstacles. I especially like my employees using it as there is less room for error in avoiding knocking things over.

     
    5.0

    I would buy more when needed

    By 

    from Los Angeles, CA.

    About Me Landscape Professional

    Verified Buyer

    Pros

    • Cut Quality
    • Ease of Use
    • Heavy Duty Construction
    • Steering / Controllability
    • Styling / Appearance

    Cons

    • Lack of Speed

    Best Uses

    • Professional / Commercial Mowing

    Comments about Exmark Vantage S-Series:

    too early to tell, it is new and assigned to a single jobsite

    Service and delivery comments:

    We picked it up ourselves and the sales person explained to my employee how to use it, that was the extend of customer service

     
    5.0

    I LOVE this mower!

    By 

    from Cleveland, Ohio

    About Me Homeowner, Landscape Professional

    Verified Buyer

    Pros

    • Comfort & Ergonomics
    • Cut Quality
    • Ease of Use
    • Engine Performance / Brand
    • Fuel Efficiency
    • Heavy Duty Construction
    • Speed
    • Steering / Controllability
    • Styling / Appearance
    • Zero-Turning Radius

    Cons

      Best Uses

      • Large Lawns (2+ acres)
      • Professional / Commercial Mowing
      • Striping

      Comments about Exmark Vantage S-Series:

      I love this mower and I highly recommend it to anyone in the landscaping business!

      (1 of 1 customers found this review helpful)

       
      5.0

      Highly recommended!

      By 

      from Cleveland, Ohio

      About Me Landscape Professional

      Verified Buyer

      Pros

      • Availability & Performance of Accessories
      • Comfort & Ergonomics
      • Cut Quality
      • Ease of Maintenance
      • Heavy Duty Construction
      • Speed
      • Steering / Controllability
      • Zero-Turning Radius

      Cons

        Best Uses

        • Large Lawns (2+ acres)
        • Mulching
        • Professional / Commercial Mowing

        Comments about Exmark Vantage S-Series:

        I love this mower! It's mulching ability and mowing capacity has beat out any other mower I've ever used. I highly recommend this mower!! You won't be sorry.

        (1 of 1 customers found this review helpful)

         
        5.0

        Great Product and its my fourth one to purchase

        By 

        from Missouri

        About Me Landscape Professional

        Verified Buyer

        Pros

        • Comfort & Ergonomics
        • Cut Quality
        • Ease of Maintenance
        • Ease of Use
        • Engine Performance / Brand
        • Fuel Efficiency
        • Heavy Duty Construction
        • Speed
        • Steering / Controllability
        • Zero-Turning Radius

        Cons

          Best Uses

          • Professional / Commercial Mowing
          • Striping

          Comments about Exmark Vantage S-Series:

          Mow crew enjoys mower better than other name brand stand on units

           
          4.0

          I am sold on the Vantage stand on mowers

          By 

          from Shreveport, Louisiana

          About Me Landscape Professional

          Verified Buyer

          Pros

          • Comfort & Ergonomics
          • Cut Quality
          • Steering / Controllability
          • Zero-Turning Radius

          Cons

          • Front caster wheels are too narrow

          Best Uses

          • Medium Lawns (1-2 acres)
          • Mulching
          • Professional / Commercial Mowing
          • Residential Mowing
          • Small Lawns (Less than 1 acre)

          Comments about Exmark Vantage S-Series:

          I am the owner/operator of a small landscape company. I was skeptical about the stand on units, but after purchasing one I could not see myself going back to a sit down model! The small footprint of the unit allows for additional equipment on my trailer, and the "vantage" point of the stand on platform allows for increased situational awareness.

           
          5.0

          So Far..So Good and No Complaints

          By 

          from Novelty, Ohio

          About Me Landscape Professional

          Verified Buyer

          Pros

          • Comfort & Ergonomics
          • Cut Quality
          • Ease of Maintenance
          • Engine Performance / Brand
          • Heavy Duty Construction
          • Speed
          • Styling / Appearance

          Cons

          • Poor Steering / Controllability

          Best Uses

          • Bagging
          • Large Lawns (2+ acres)
          • Medium Lawns (1-2 acres)
          • Mulching
          • Professional / Commercial Mowing
          • Residential Mowing
          • Small Lawns (Less than 1 acre)
          • Striping

          Comments about Exmark Vantage S-Series:

          All in all...this is a good quality mower and the only issue for me was the learning curve of the steering. Im getting there but give yourself or employees time to get good at it. I look at some of my employees that use it and once proficient, it gives a great gut and its overall faster than the walk behind. I will be buying another one.

          Service and delivery comments:

          Excellent

           
          5.0

          I have purchased several of these mowers.

          By 

          from Mentor, Ohio

          About Me Landscape Professional

          Verified Buyer

          Pros

          • Availability & Performance of Accessories
          • Comfort & Ergonomics
          • Cut Quality
          • Ease of Maintenance
          • Ease of Use
          • Engine Performance / Brand
          • Fuel Efficiency
          • Heavy Duty Construction
          • Speed
          • Steering / Controllability
          • Styling / Appearance
          • Zero-Turning Radius

          Cons

            Best Uses

            • Large Lawns (2+ acres)
            • Professional / Commercial Mowing
            • Striping

            Comments about Exmark Vantage S-Series:

            Nice cutting mower

             
            5.0

            I would by again. Awesome mower

            By 

            from Richmond hill ga.

            About Me Landscape Professional

            Verified Buyer

            Pros

            • Cut Quality
            • Ease of Maintenance
            • Ease of Use
            • Engine Performance / Brand
            • Fuel Efficiency
            • Heavy Duty Construction
            • Steering / Controllability
            • Styling / Appearance
            • Zero-Turning Radius

            Cons

              Best Uses

              • Large Lawns (2+ acres)
              • Medium Lawns (1-2 acres)
              • Professional / Commercial Mowing
              • Residential Mowing
              • Side Discharge
              • Small Lawns (Less than 1 acre)
              • Striping

              Comments about Exmark Vantage S-Series:

              I use mower for lawn care maintenance company. Works and cuts great.

              Displaying reviews 1-10

              Back to top

              Previous | Next »