LZX980EKC96RW0
Lazer Z X-Series
Power Components
Transmission Speeds
Infinitely Variable
Engine Brand
Kohler
Engine Model
ECV980
Engine Displacement
999
Engine Series
Command Pro™ EFI
Fuel System
Electronic Throttle Body
Transmission
Hydrostatic
Speed
Infinitely variable speed selection from 0–10.5 mph (16.8 kmph) forward, 0–6.0 mph (9.7 kmph) reverse
Engine Spec
3018
Engine Speed
3,650 RPM
Drive
Hydro-Drive
Fuel Capacity
12-gallon (45.4-L), single fuel tank with single fill location.
Air Filter
Heavy-duty canister air filtration system
Drive Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 18 cubic inch motors.
PTO Engagement
MagStop Electromagnetic 250-ft-lb clutch with spot brake
Fuel Type
Gas EFI
Fuel Indicator
Yes - electronic Sender
Drive Wheel Release
Allows unit movement without engine running.
Deck Lift
Electric over hydraulic push button control
Carb Compliant
No
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS
2-post foldable ROPS standard with seat belt and latch.
Decks
Deck Style
Floating Deck
Deck Style Description
Full-floating UltraCut Rear Discharge Deck. Finish cut baffles installed standard, rear discharge improvement baffles available via kit.
Width / Cutting Deck
96"
Deck Construction
7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Cutting Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments.
Blade Tip Speed
Approximately 18,500 fpm
Blades
4 Blades at 24.50" Length
Equipment
UPC
193308119649
Onboard Intelligence
RED Technology
Starter
Electric
Steering Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Caster Forks
.50" thick caster yoke arms.
Front Caster Tires
13 x 6.5-6, smooth-tread, semi-pneumatic.
Drive Tires
24 x 12.0-12, 4-ply Turf Master®
Parking Brake
Lever-actuated disc brake.
Tractor Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
Electrical
12-volt battery with 40-amp alternator.
Standard Features
Engine hour meter and cup holder
Seat
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Dimensions
Width
101.3 in. (257.0 cm), 72.5 in. @ 3 in. HOC when folded
Height
70.5 in. (179.1 cm)
Length
95.8 in. (243.3 cm)
Curb Weight
2200
