LZX980EKC606R1
Lazer Z X-Series
Equipment
UPC
193308225449
Onboard Intelligence
RED Technology
Starter
Electric
Steering Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Caster Forks
.50" thick caster yoke arms.
Front Caster Tires
13 x 6.5-6, smooth-tread, semi-pneumatic.
Drive Tires
24 x 12.0-12, 4-ply Turf Master®
Parking Brake
Lever-actuated disc brake.
Tractor Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
Electrical
12-volt battery with 25-amp alternator.
Standard Features
Engine hour meter and cup holder
Seat
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Power Components
Engine Brand
Kohler
Transmission Speeds
Infinitely Variable
Engine Model
ECV980
Engine Displacement
999
Fuel System
Electronic Throttle Body
Engine Series
Command Pro™ EFI
Transmission
Hydrostatic
Speed
Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse
Engine Spec
3017
Drive
Hydro-Drive
Engine Speed
3,650 RPM
Air Filter
Heavy-duty canister air filtration system
Fuel Capacity
12-gallon (45.4-L), single fuel tank with single fill location.
Drive Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Fuel Type
Gas EFI
PTO Engagement
MagStop Electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release
Allows unit movement without engine running.
Fuel Indicator
Yes - electronic Sender
Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Equipped with Adapt system.
Carb Compliant
No
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS
2-post foldable ROPS standard with seat belt and latch.
Decks
Deck Style
Floating Deck
Deck Style Description
Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Width / Cutting Deck
60"
Deck Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Cutting Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blade Tip Speed
Approximately 18,500 fpm.
Blades
3 Blades at 20.50" Length
Dimensions
Width
72.8 in. (184.9 cm)
Height
70.5 in. (179.1 cm)
Length
83.1 in. (211.1 cm)
Curb Weight
1256
