Mouseover to Zoom

Lazer Z Diesel with RED Technology

Taking on-board intelligence to the next level.
The next generation RED leverages the latest technologies to deliver increased machine efficiency, ease of use and durability. This technology provides users an increased ability to control mower power and efficiency with defined performance modes.

Features


Model Specs


Specifications for model # LZS80TDYM604W0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 26x12-12, 6ply Multi Trac®
Cup Holder Standard
Tractor Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated internal wet disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 55-amp alternator.
Power Components
Engine Brand Yanmar
Engine Model 3TNV80FT
Engine Displacement 1,267
Engine Series TNV
Engine Type Electronically Governed IDI Turbo Diesel
Engine Speed 2,600 RPM
Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor
Fuel Type Diesel
Fuel Capacity 12-gallon (45.4-L), side fuel tanks
Fuel Indicator Yes - mechanical float type
Drive Hydro-Drive
Drive Description Kanzaki KPS-18T Transmission, 15-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-H motors, hydraulic oil cooler.
Speed Infinitely variable speed selection from 0–11.0 mph (18 kmph) forward, 0–6 mph (10 kmph) reverse.
Carb Compliant Yes
Deck Lift Hydraulic
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z Diesel 25 HP** Yanmar 3TNV80FT Diesel w/60" UltraCut Series 4 Deck, Susp Seat & 15" Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 17,600 fpm
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 96.3 in. (244.6 cm)
Height 72.5 in. (244.6 cm)
Curb Weight 1915

Specifications for model # LZS80TDYM724W0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 26x12-12, 6ply Multi Trac®
Cup Holder Standard
Tractor Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated internal wet disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 55-amp alternator.
Power Components
Engine Brand Yanmar
Engine Model 3TNV80FT
Engine Displacement 1,267
Engine Series TNV
Engine Type Electronically Governed IDI Turbo Diesel
Engine Speed 2,600 RPM
Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor
Fuel Type Diesel
Fuel Capacity 12-gallon (45.4-L), side fuel tanks
Fuel Indicator Yes - mechanical float type
Drive Hydro-Drive
Drive Description Kanzaki KPS-18T Transmission, 15-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-H motors, hydraulic oil cooler.
Speed Infinitely variable speed selection from 0–11.0 mph (18 kmph) forward, 0–6 mph (10 kmph) reverse.
Carb Compliant Yes
Deck Lift Hydraulic
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z Diesel 25 HP** Yanmar 3TNV80FT Diesel w/72" UltraCut Series 4 Deck, Susp Seat & 15" Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 17,900 fpm
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 99.6 in. (253.0 cm)
Height 72.5 in. (244.6 cm)
Curb Weight 1930

Specifications for model # LZS80TDYM72RW0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 26x12-12, 6ply Multi Trac®
Cup Holder Standard
Tractor Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated internal wet disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 55-amp alternator.
Power Components
Engine Brand Yanmar
Engine Model 3TNV80FT
Engine Displacement 1,267
Engine Series TNV
Engine Type Electronically Governed IDI Turbo Diesel
Engine Speed 2,600 RPM
Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor
Fuel Type Diesel
Fuel Capacity 12-gallon (45.4-L), side fuel tanks
Fuel Indicator Yes - mechanical float type
Drive Hydro-Drive
Drive Description Kanzaki KPS-18T Transmission, 15-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-H motors, hydraulic oil cooler.
Speed Infinitely variable speed selection from 0–11.0 mph (18 kmph) forward, 0–6 mph (10 kmph) reverse.
Carb Compliant Yes
Deck Lift Hydraulic
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z Diesel 25 HP**Yanmar 3TNV80FT Diesel w/72" UltraCut RD Deck, Susp Seat & 15" Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 17,900 fpm
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 78.0 in. (198.1 cm)
Length 100.6 in. (255.5 cm)
Height 72.5 in. (244.6 cm)
Curb Weight 2041

Specifications for model # LZS88CDYM604W0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 26x12-12, 6ply Multi Trac®
Cup Holder Standard
Tractor Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated internal wet disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 55-amp alternator.
Power Components
Engine Brand Yanmar
Engine Model 3TNV88C
Engine Displacement 1,642
Engine Series TNV
Engine Type Common Rail Diesel
Engine Speed 3,000 RPM
Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor
Fuel Type Diesel
Fuel Capacity 12-gallon (45.4-L), side fuel tanks
Fuel Indicator Yes - mechanical float type
Drive Hydro-Drive
Drive Description Kanzaki KPS-18T Transmission, 15-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-H motors, hydraulic oil cooler.
Speed Infinitely variable speed selection from 0–12.5 mph (20 kmph) forward, 0–7 mph (11 kmph) reverse.
Carb Compliant Yes
Deck Lift Hydraulic
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z Diesel 37 HP** Yanmar 3TNV88C Diesel w/60" UltraCut Series 4 Deck, Susp Seat & 15" Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,200 fpm
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 96.3 in. (244.6 cm)
Height 72.5 in. (244.6 cm)
Curb Weight 2124

Specifications for model # LZS88CDYM724W0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 26x12-12, 6ply Multi Trac®
Cup Holder Standard
Tractor Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated internal wet disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 55-amp alternator.
Power Components
Engine Brand Yanmar
Engine Model 3TNV88C
Engine Displacement 1,642
Engine Series TNV
Engine Type Common Rail Diesel
Engine Speed 3,000 RPM
Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor
Fuel Type Diesel
Fuel Capacity 12-gallon (45.4-L), side fuel tanks
Fuel Indicator Yes - mechanical float type
Drive Hydro-Drive
Drive Description Kanzaki KPS-18T Transmission, 15-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-H motors, hydraulic oil cooler.
Speed Infinitely variable speed selection from 0–12.5 mph (20 kmph) forward, 0–7 mph (11 kmph) reverse.
Carb Compliant Yes
Deck Lift Hydraulic
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z Diesel 37 HP** Yanmar 3TNV88C Diesel w/72" UltraCut Series 4 Deck, Susp Seat & 15" Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 99.6 in. (253.0 cm)
Height 72.5 in. (244.6 cm)
Curb Weight 2133

Specifications for model # LZS88CDYM96RW0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 26x12-12, 6ply Multi Trac®
Cup Holder Standard
Tractor Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated internal wet disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 55-amp alternator.
Power Components
Engine Brand Yanmar
Engine Model 3TNV88C
Engine Displacement 1,642
Engine Series TNV
Engine Type Common Rail Diesel
Engine Speed 3,000 RPM
Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor
Fuel Type Diesel
Fuel Capacity 12-gallon (45.4-L), side fuel tanks
Fuel Indicator Yes - mechanical float type
Drive Hydro-Drive
Drive Description Kanzaki KPS-18T Transmission, 15-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-H motors, hydraulic oil cooler.
Speed Infinitely variable speed selection from 0–12.5 mph (20 kmph) forward, 0–7 mph (11 kmph) reverse.
Carb Compliant Yes
Deck Lift Hydraulic
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z Diesel 37 HP** Yanmar 3TNV88C Diesel w/96" UltraCut RD Deck, Susp Seat & 15" Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 96"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with finish cut baffles installed.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 18,100 fpm
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments.
Blades 4 Blades at 24.50" Length
Dimensions
Width 101.2 in. (257.0cm), 72.5 in. @ 3 in. HOC when folded
Length 97.3 in. (247.9 cm)
Height 72.5 in. (244.6 cm)
Curb Weight 2584

Accessories


Exmark Product Models: Parts Only

UltraVac Collection System

Part# 126-8680

UltraVac 3-Bagger Collection System (NLZD)

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

Slow Moving Vehicle Sign Kit

Part# 135-2891

Slow moving sign kit (NLZD)

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6656

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Models: Parts Only

Operator Controlled Discharge (foot)

Part# 135-2472

Operator Controlled Discharge (Foot)

Exmark Product Models: Parts Only

Rear Guard and Bumper Kit

Part# 135-3445

NLZD REAR GUARD-BUMPER

Exmark Product Models: Parts Only

Completing Kit

Part# 126-8675

UltraVac Completing Kit, 604-80T (NLZD)

Exmark Product Models: Parts Only

Jack Mount Receiver

Part# 135-1768

RECEIVER-JACK MOUNT - Lazer Diesel

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Models: Parts Only

Trash Container

Part# 135-2473

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information. (Not compatible with 96" Lazer Z Diesel)

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 126-8077

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

Exmark Product Models: Parts Only

Hitch Kit

Part# 135-3616

Hitch kit (NLZD)

Exmark Product Models: Parts Only

Operator Controlled Discharge (foot)

Part# 135-2472

Operator Controlled Discharge (Foot)

Exmark Product Models: Parts Only

Jack Mount Receiver

Part# 135-1768

RECEIVER-JACK MOUNT - Lazer Diesel

Exmark Product Models: Parts Only

Trash Container

Part# 135-2473

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information. (Not compatible with 96" Lazer Z Diesel)

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

UltraVac Collection System

Part# 126-8680

UltraVac 3-Bagger Collection System (NLZD)

Exmark Product Models: Parts Only

Slow Moving Vehicle Sign Kit

Part# 135-2891

Slow moving sign kit (NLZD)

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6656

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Models: Parts Only

Completing Kit

Part# 126-8677

UltraVac Completing Kit, 724-80T (NLZD)

Exmark Product Models: Parts Only

Rear Guard and Bumper Kit

Part# 135-3445

NLZD REAR GUARD-BUMPER

Exmark Product Thumbnail

Micro-Mulch System

Part# MK726

The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.

Exmark Product Models: Parts Only

Hitch Kit

Part# 135-3616

Hitch kit (NLZD)

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 126-8077

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

Exmark Product Models: Parts Only

White Non-Marking Side Bumper

Part# 126-0854

Perfect for restricted and sensitive mowing areas, these durable bumpers eliminate the marking left behind by incidental contact.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Anti-Scalp and Side Wear Bar Kit

Part# 127-6650

Protect your rear discharge cutting deck from impact, and your turf from tearing. This kit gives you peace of mind when mowing in tight spaces. The tapered anti-scalp roller help to prevent turf gouging in sharp turns.

Exmark Product Models: Parts Only

Slow Moving Vehicle Sign Kit

Part# 135-2891

Slow moving sign kit (NLZD)

Exmark Product Models: Parts Only

Rear Guard and Bumper Kit

Part# 135-3445

NLZD REAR GUARD-BUMPER

Exmark Product Models: Parts Only

Trash Container

Part# 135-2473

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information. (Not compatible with 96" Lazer Z Diesel)

Exmark Product Models: Parts Only

Jack Mount Receiver

Part# 135-1768

RECEIVER-JACK MOUNT - Lazer Diesel

Exmark Product Models: Parts Only

Finish Cut Baffles

Part# 116-8548

Maximize cut quality in the toughest conditions with this finish cut baffle kit.

Exmark Product Models: Parts Only

Hitch Kit

Part# 135-3616

Hitch kit (NLZD)

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 126-8077

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

Exmark Product Models: Parts Only

Operator Controlled Discharge (foot)

Part# 135-2472

Operator Controlled Discharge (Foot)

Exmark Product Models: Parts Only

Rear Guard and Bumper Kit

Part# 135-3445

NLZD REAR GUARD-BUMPER

Exmark Product Models: Parts Only

Jack Mount Receiver

Part# 135-1768

RECEIVER-JACK MOUNT - Lazer Diesel

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Models: Parts Only

Completing Kit

Part# 126-8676

UltraVac Completing Kit, 604-88C (NLZD)

Exmark Product Models: Parts Only

Trash Container

Part# 135-2473

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information. (Not compatible with 96" Lazer Z Diesel)

Exmark Product Models: Parts Only

UltraVac Collection System

Part# 126-8680

UltraVac 3-Bagger Collection System (NLZD)

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

Slow Moving Vehicle Sign Kit

Part# 135-2891

Slow moving sign kit (NLZD)

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6656

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 126-8077

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

Exmark Product Models: Parts Only

Hitch Kit

Part# 135-3616

Hitch kit (NLZD)

Exmark Product Models: Parts Only

Jack Mount Receiver

Part# 135-1768

RECEIVER-JACK MOUNT - Lazer Diesel

Exmark Product Models: Parts Only

Trash Container

Part# 135-2473

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information. (Not compatible with 96" Lazer Z Diesel)

Exmark Product Models: Parts Only

Completing Kit

Part# 126-8678

UltraVac Completing Kit, 724-88C (NLZD)

Exmark Product Models: Parts Only

Slow Moving Vehicle Sign Kit

Part# 135-2891

Slow moving sign kit (NLZD)

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

UltraVac Collection System

Part# 126-8680

UltraVac 3-Bagger Collection System (NLZD)

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6656

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Models: Parts Only

Operator Controlled Discharge (foot)

Part# 135-2472

Operator Controlled Discharge (Foot)

Exmark Product Models: Parts Only

Rear Guard and Bumper Kit

Part# 135-3445

NLZD REAR GUARD-BUMPER

Exmark Product Thumbnail

Micro-Mulch System

Part# MK726

The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.

Exmark Product Models: Parts Only

Hitch Kit

Part# 135-3616

Hitch kit (NLZD)

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 126-8077

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

Exmark Product Models: Parts Only

Slow Moving Vehicle Sign Kit

Part# 135-2891

Slow moving sign kit (NLZD)

Exmark Product Models: Parts Only

Rear Guard and Bumper Kit

Part# 135-3445

NLZD REAR GUARD-BUMPER

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

Jack Mount Receiver

Part# 135-1768

RECEIVER-JACK MOUNT - Lazer Diesel

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 126-8077

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

Exmark Product Models: Parts Only

Hitch Kit

Part# 135-3616

Hitch kit (NLZD)

Exmark Product Models: Parts Only

Finish Cut Baffles

Part# 135-2449

Finish cut baffles (96)

Warranty


Reviews