Once again, let’s talk lubrication.

September 23, 2010

EngineOil_FrontIt’s true we have multiple posts discussing lubrication. (Three to be exact, but who’s counting?) But as you’re wondering why we’re getting stuck on this one topic, just remember that proper lubrication extends the life of your mower.  And, we want you to help keep those bad boys working hard for you for as long as possible.

So here’s the breakdown on what you need to know and what you should be doing:

  • Change the engine oil after the first five hours of operating a new mower.
  • Your first hydraulic oil and filter change should be at 200 hours.
  • After initial hydraulic oil and filter change, and if you’re using genuine Exmark Hydraulic Oil, change the oil and filter at maximum every 500 hours.
  • If you’re using Mobil 1 Oil, change the oil and filter at maximum every 250 hours.
  • If you are mowing hills or running bagging equipment, change hydraulic fluid and engine oil much more frequently than manufacturer’s maximum recommendations.
  • Use a high-quality oil since less expensive grease or generic brands might cost you more in the long run.
  • Engine manufacturers do not recommend the use of synthetic oils.  Find more information on Exmark’s YouTube channel at www.youtube.com/exmarkmanufacturing.
  • You have the option of using Exmark-branded engine oil, which is specifically formulated for mowers.

Did you find this post helpful? Leave us a comment below.