Fall maintenance, Part 2

October 22, 2010

In this second part of our maintenance segment, we continue to provide tips to help you get your mower in tiptop shape for its hibernation period. If you missed part one of this segment, go here.

Closer inspection

This is a good time to check your machine’s belts and replace any that are frayed, cut or damaged. Check the mower’s pulleys, making sure they’re not bent, misaligned or jammed with debris. Landscape bark has a tendency to get wedged deep into the pulleys, so give them a close inspection.

Storage

Whether you’re storing your machine in a shed, under a tarp or in an enclosed trailer you want to do whatever you can to keep rodents away. Aside from thoroughly cleaning your mower, you can take other precautions to deter little critters from turning your machine into their winter home. You have your pick of traps and chemicals as well as natural means, such as Osage oranges and oil of peppermint to keep mice at bay. Peppermint candy will NOT do the trick, but invite more critters as well as insects to the party. Don’t use any harsh chemicals around your machine as they will cause damage. If you live in a rural area, you might want to consult with your local pest control office. They’re likely to give you good suggestions. Your local Exmark dealer will also be able to provide ways to keep your mower rodent-free.

Moisture is the other thing you want to keep as far away from your mower as possible. Wherever your mower is stored, make sure rain, ice and snow aren’t getting in.

We also recommend draining the fuel from your machine, or adding a fuel stabilizer. Don’t let fuel sit in your mower through the winter months.

Battery

To extend the life of your battery, best thing to do is remove it from your machine and keep it in a climate controlled area that’s between 50 and 70 degrees. For other tips on battery maintenance, check out this post.

Following these steps will ensure a safe winter season for your machines. Come spring, they’ll be ready to go back to work.

This blog post is by David Martin, customer service manager at Exmark.