LZS86TDYM12RW0
Lazer Z Diesel
Equipment
UPC
193308219912
Onboard Intelligence
RED Technology
Starter
Electric
Steering Control
Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Caster Forks
.50" thick caster yoke arms.
Front Caster Tires
15 x 6.0-6, smooth-tread, semi-pneumatic.
Drive Tires
26x12-12, 6ply
Parking Brake
Spring applied, hydraulic release internal wet disc brake.
Tractor Frame
Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
Electrical
12-volt battery with 175-amp alternator.
Standard Features
12-volt plug-in, engine hour meter and cup holder
Seat
Deluxe, two-tone, bolstered 4" travel suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Power Components
Engine Brand
Yanmar
Transmission Speeds
Infinitely Variable
Engine Model
3TNV86CT
Engine Displacement
1568 cc
Fuel System
Common Rail Diesel with fuel cooler
Engine Series
TNV
Speed
Infinitely variable speed selection from 0–10 mph (16 kmph) in low speed forward, 0-6mph (10 kmph) reverse and 0-17 mph (27 kmph) in high speed forward, 0–10 mph (16 kmph) reverse.
Transmission
Hydrostatic
Engine Spec
DTR2
Drive
Hydro-Drive
Engine Speed
3,000 RPM
Air Filter
Heavy-duty canister air filtration system with electronic vacuum sensor
Fuel Capacity
12-gallon (45.4-L), side fuel tanks
Drive Description
Kanzaki KPS-18T Transmission, 14-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 1.83/1.09 cubic inch 2 speed Danfoss axial piston motors plus Omni planetary gear reduction, hydraulic oil cooler.
PTO Engagement
Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Fuel Type
Diesel
Drive Wheel Release
Allows unit movement without engine running.
Fuel Indicator
Yes - mechanical float type
Deck Lift
Hydraulic
Carb Compliant
Yes
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS
2-post foldable ROPS standard with seat belt and latch.
Decks
Deck Style
Floating Deck
Deck Style Description
Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with finish cut baffles included.
Width / Cutting Deck
144"
Deck Construction
7-gauge high strength alloy top that is formed and seam welded, with 7-gauge high strength alloy side skirt.
Cutting Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments.
Blade Tip Speed
Approximately 18,500 fpm
Blades
6 Blades at 24.50" Length
Dimensions
Width
144.9 in. (368cm), 84 in. (213cm) @ 3 in. HOC when folded
Height
72.6 in. (184.3 cm)
Length
101.3 in. (257.3 cm)
Curb Weight
3250
