Find a local dealer

RAS730GKA60RA3

Radius S-Series

Equipment

Blade Spindles

No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.

Drive Tires

23 x 10.5-12 Super Turf (142-4266)

Tractor Frame

Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.

Steering Control

Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.

Front Caster Tires

13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings (126-3289)

Parking Brake

Lever-actuated pawl brake.

Seat

Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch

Electrical

12-volt battery with 15-amp alternator.

Standard Features

Engine hour meter, cup holder, tow hitch and jack receiver

UPC

193308215778

Power Components

Engine Brand

Kawasaki

Engine Model

FX730V

Engine Displacement

726

Engine Series

V-Twin

Fuel System

Carbureted

Engine Speed

3700 rpm

Air Filter

Cyclonic Air Cleaner

Fuel Type

Gas Carbureted

Fuel Capacity

7-gallon (26.5-L) single fuel tank with single fill location.

Fuel Indicator

Translucent Visual

Drive

Hydro-Drive

Drive Description

Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.

Speed

Infinitely variable speed selection from 0–9.0 mph (14.5 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.

Carb Compliant

No

Deck Lift

Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

Safety Package

Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.

ROPS

2-post foldable ROPS standard with seat belt and latch.

PTO Engagement

MagStop electromagnetic 125-ft-lb clutch

Drive Wheel Release

Allows unit movement without engine running.

Casters

.375" thick caster yoke arms

Engine Spec

_S26

Decks

Width / Cutting Deck

60"

Deck Style

Floating Deck

Deck Style Description

Full-floating UltraCut Rear Discharge Deck.

Deck Construction

10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.

Blade Tip Speed

Approximately 18,500 fpm.

Cutting Heights

1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.

Blades

3 Blades at 20.50" Length

Dimensions

Width

66 in (168 cm)

Length

84 in (213 cm)

Height

70 in (178 cm)

Curb Weight

1044