No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 17mm (.67") diameter spindle shaft.
18 x 7.5-8 Turf Tech TL
Unibody, riveted 10-guage steel.
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Front Caster Tires
11 x 4.0-5 smooth-tread, pneumatic.
Automatic-actuated pawl brake.
Units have 16" high-back (no armrests). Hinged mounting with spring suspension. Adjustment fore and aft 3" by loosening 2 bolts and sliding seat.
12 volt battery with 15-amp alternator
Cup holder and hitch
Hour meter and seat armrests
Standard Engine Manufacturer's air filter
3-gallon (11.0-L), single fuel tank with single fill locations
Two Hydro-Gear ZT-2100 hydro static transmissions with no hoses and integrated cooling fans and integrated reservoir
Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
Standard; hand lever deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Operator Presence Controls (OPC) and drive system interlock.
Optional Rigid ROPS with seat belt and latch.
Electromagnetic 80-ft-lb clutch
Drive Wheel Release
Allows unit movement without engine running.
.25" thick caster yoke arms.
Width / Cutting Deck
Deck Style Description
Series 2 fabricated and welded steel deck. Decks have side discharge standard with the option ot bag or mulch.
10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 3 point suspension.
Blade Tip Speed
Approximately 18,500 fpm.
1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat.
2 Blades at 21.6" Length
53.8 in. (137.0 cm)
75.0 in. (191.0 cm)
45.6 in. (113.0 cm)