Turf Tracer X-Series EFI
Turf Tracer X-Series EFI
Large properties. Small properties. Tight spaces. Ornate landscaping. Whether you’re looking for a large walk behind with all of the bells and whistles or something a bit more modest, the Turf Tracer EFI X-Series is the family to turn to. All Exmark walk-behinds are designed to be incredibly productive, delivering a one-of-a-kind cut with each pass. These machines are built to last, taking on the toughest mowing conditions without breaking a sweat. They’ll have you easily maneuvering on hillsides, around flower beds, and anything else that can end up on the lawn. These EFI mowers are available with 52- or 60-inch cutting decks.
Turf Tracer X-Series EFI Features
Eco-Friendly
Reduces fuel consumption, fewer emissions and carbon footprint.
Fuel Savings
Delivers up to 25% in fuel savings.
Reduce Green House Gases
Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
Easy to Start
Easy start in any altitude or climate condition (no manual choke).
Engine Efficiency
Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
Sequential Fuel Injection
Delivers the precise amount of fuel and spark where needed to maximize efficiency and power.
- Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
- Caster Forks .38" thick caster yoke arms
- Front Caster Tires 11 x 4.0-5, smooth tread, semi-pneumatic.
- Drive Tires 18 x 8.5-8, 4-ply Turf Master®
- Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
- Parking Brake Lever-actuated mechanical compression.
- Electrical 12-volt battery with 20-amp alternator.
- Standard Features Enhanced engine hour meter
- UPC 193308000138
- Engine Model ECV650
- Engine Brand Kohler
- Engine Series Command™ EFI
- Engine Speed 3,600 rpm
- Air Filter Heavy-duty canister air filtration system
- Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54cm) tapered shafts.
- Speed Infinitely variable speed selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse.
- PTO Engagement Electromagnetic 200 ft-lbs clutch.
- Fuel Capacity 5-gallon (18.9-L) fuel tank.
- Drive Wheel Release Allows unit movement without engine running.
- Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
- Fuel System Electronic Fuel Injected
- Engine Displacement 694
- Drive Hydro-Drive
- Fuel Indicator None
- Carb Compliant No
- Fuel Type Gas EFI
- Engine Spec 3017
- Deck Style Floating Deck
- Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
- Width / Cutting Deck 52"
- Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength.
- Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
- Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
- Blade Tip Speed Approximately 18,500 fpm.
- Bag Capacity 3 Blades at 18.00" Length
- Blades 3 Blades at 18.00" Length
- Width 64.8 in. (164.6 cm)
- Length 84.8 in. (215.4cm)
- Height 45.0 in. (114.3 cm)
- Curb Weight 720
Micro-Mulch System
The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.
Operator Controlled Discharge Gate & Cable Assembly
Operator Controlled Discharge Lever (Foot)
Operator Controlled Discharge Lever (Hand)
3-Bushel Bagger
Lightweight and easy to attach, this 3-bushel grass catcher fits most riders, stand-ons and wide-area walk-behinds. Adapter kit required for select models.
Equipment Cover
Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.
Buy Now
Hydro Maintenance Kit
Kit includes: 3 quarts of Exmark® Premium Hydraulic Oil and 1 Hydro Filter
Buy Now
StandOn
Exmark’s StandOn features a convenient spring loaded latch and an expanded operator deck that provides a more comfortable and productive mowing experience.
Turf Striping Kit
Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.
Buy Now