|
|
Vantage X-Series Specifications
|
(VTX651KA484) VANTAGE X SERIES FX651V KAWASAKI WITH 48" ULTRACUT SERIES 4 DECK
POWER COMPONENTS
| Engine: |
Kawasaki® |
| Model: |
FS651V |
| Displacement: |
651 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors. |
| Speed: |
Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse |
| PTO Engagement: |
Warner 200 ft-lb clutch |
| Fuel Capacity: |
8-gallon (30.3-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) with safety interlock system indicators |
| Casters: |
.38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. |
| Cup Holder: |
Optional |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
48" (121.92 cm) |
| Deck Lift: |
Standard; mechanical lift-assist springs. |
| Cutting Heights |
1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position. |
| Blades |
3 Blades at 16.25" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. |
| Front Caster Tires: |
11 x 4.0-5, smooth-tread, semipneumatic tires. |
| Drive Tires |
20 x 10.50-8 Kenda Tires |
| Parking Brake |
Lever-actuated bar brake. |
| Blade Spindles |
No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft. |
| Electrical |
12-volt battery with 15-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
855 lbs |
| Length: |
74 in. (188 cm) |
| Width: |
59.6 in. (151.4 cm) |
| Height: |
50 in. (127 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(VTX691KA524) VANTAGE X SERIES FX691V KAWASAKI WITH 52" ULTRACUT SERIES 4 DECK AND ECS HANDLES
POWER COMPONENTS
| Engine: |
Kawasaki® |
| Model: |
FX691V |
| Displacement: |
691 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors. |
| Speed: |
Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse |
| PTO Engagement: |
Warner 200 ft-lb clutch |
| Fuel Capacity: |
8-gallon (30.3-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) with safety interlock system indicators |
| Casters: |
.38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. |
| Cup Holder: |
Optional |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
52" (132.08 cm) |
| Deck Lift: |
Standard; mechanical lift-assist springs. |
| Cutting Heights |
1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position. |
| Blades |
3 Blades at 18" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. |
| Front Caster Tires: |
11 x 4.0-5, smooth-tread, semipneumatic tires. |
| Drive Tires |
20 x 10.50-8 Kenda Tires |
| Parking Brake |
Lever-actuated bar brake. |
| Blade Spindles |
No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft. |
| Electrical |
12-volt battery with 15-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
866 lbs |
| Length: |
74 in. (188 cm) |
| Width: |
64.8 in. (164.6 cm) |
| Height: |
50 in. (127 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(VTX730EKC524) VANTAGE X SERIES ECV730 EFI KOHLER WITH 52" ULTRACUT SERIES 4 DECK AND ECS HANDLES
POWER COMPONENTS
| Engine: |
Kohler® |
| Model: |
ECV730 |
| Displacement: |
730 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors. |
| Speed: |
Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse |
| PTO Engagement: |
Warner 200 ft-lb clutch |
| Fuel Capacity: |
8-gallon (30.3-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) with safety interlock system indicators |
| Casters: |
.38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. |
| Cup Holder: |
Optional |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
52" (132.08 cm) |
| Deck Lift: |
Standard; mechanical lift-assist springs. |
| Cutting Heights |
1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position. |
| Blades |
3 Blades at 18" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. |
| Front Caster Tires: |
11 x 4.0-5, smooth-tread, semipneumatic tires. |
| Drive Tires |
20 x 10.50-8 Kenda Tires |
| Parking Brake |
Lever-actuated bar brake. |
| Blade Spindles |
No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft. |
| Electrical |
12-volt battery with 20-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
875 lbs |
| Length: |
74 in. (188 cm) |
| Width: |
64.8 in. (164.6 cm) |
| Height: |
50 in. (127 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(VTX740EKC604) VANTAGE X SERIES ECV740 EFI KOHLER WITH 60" ULTRACUT SERIES 4 DECK AND ECS HANDLES
POWER COMPONENTS
| Engine: |
Kohler® |
| Model: |
ECV740 |
| Displacement: |
740 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors. |
| Speed: |
Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse |
| PTO Engagement: |
Warner 200 ft-lb clutch |
| Fuel Capacity: |
8-gallon (30.3-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) with safety interlock system indicators |
| Casters: |
.38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. |
| Cup Holder: |
Optional |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
60" (152.4 cm) |
| Deck Lift: |
Standard; mechanical lift-assist springs. |
| Cutting Heights |
1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position. |
| Blades |
3 Blades at 20.50" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. |
| Front Caster Tires: |
11 x 4.0-5, smooth-tread, semipneumatic tires. |
| Drive Tires |
20 x 10.50-8 Kenda Tires |
| Parking Brake |
Lever-actuated bar brake. |
| Blade Spindles |
No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft. |
| Electrical |
12-volt battery with 20-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
883 lbs |
| Length: |
74 in. (188 cm) |
| Width: |
72.8 in. (184.9 cm) |
| Height: |
50 in. (127 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
|
|