Maintenance Schedule: Turf Tracer® HP
|
|
LUBRICATION CHART
|
|
After the first 2 hours
|
- Inspect PTO clutching belt tension.
-
Check every 2 hours for the first 8 hours of operation.
|
|
After the first 5 hours
|
|
|
After the first 100 hours
|
-
Check wheel hub-slotted torque specification.
|
|
After the first 250 hours
|
-
Change the hydraulic filter.
|
|
Before each use or daily
|
- Check the engine oil level.
- Check the mower blades.
- Check the safety interlock system.
- Check for loose hardware.
- Grease the caster wheel bearings.
- Grease caster pivots.
-
Clean the grass build-up from under the deck.
|
|
Every 25 hours
|
-
Service the air cleaner. (May need more often under severe conditions. See the Engine
Owner’s manual for additional information.)
|
|
Every 40 hours
|
- Check the hydraulic oil level.
- Check the tire pressures.
- Check the condition of the belts.
- Grease the pump drive idler pivot.
- Grease the clutch arm pivot.
- Grease the pump control bearings.
- Grease the mower deck idler pivot.
-
Inspect PTO clutching belt tension.
|
|
Every 80 hours
|
-
Remove engine shrouds and clean cooling fins.
|
|
Every 100 hours
|
-
Change the engine oil. (May need more often under severe conditions.)
|
|
Every 160 hours
|
|
|
Every 500 hours
|
-
Check wheel hub-slotted torque specification.
|
|
Monthly
|
- Check the battery charge.
-
Grease the PTO engagement bellcrank.
|
|
Yearly
|
-
Change the hydraulic filter.
|
|
Note: Our operator’s manual details the steps and procedures for the above
items.
To download the
operator’s manual, please click here.
|
|
|
|
|