Side-By-Side Comparison Chambersburg PA | Shanks Lawn Equipment LLC
VXX999EKA52600
Vertex X-Series
Power Components
Transmission Brand
Hydro-Gear
Engine Brand
Kawasaki
Transmission Speeds
Infinitely Variable
Engine Model
FX1000V
Engine Displacement
999
Transmission
Hydrostatic
Fuel System
Electronic Fuel Injected
Speed
Infinitely variable speed selection 0–12.0 mph (19.3 kmph) forward, 0–5.0 mph (8.0 kmph) reverse
Engine Series
V-Twin
Engine Speed
3,600 rpm
Air Filter
Heavy-duty canister air filtration system
Fuel Capacity
14-gallon (53.0-L), Dual fuel tanks on RH and LH side.
Drive Description
Two Hydro-Gear 16 cc pumps powering two Hydro gear 17.8 cubic inch motors.
Fuel Type
Gas EFI
PTO Engagement
Warner 250 ft-lb clutch
Drive System
HYDRO
Fuel Indicator
Yes - Float Gauge
Drive Wheel Release
Allows unit movement without engine running.
Deck Lift
Single point HOC; with mechanical lift-assist springs.
Carb Compliant
NO
Safety Package
Operator Presence Controls (OPC) with safety interlock system indicators
Dimensions
Width
64.79
Height
48.75
Length
70.45
Curb Weight
1250
Decks
Deck Style
Floating Deck
Deck Style Description
Full-floating UltraCut Series 6. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck
52"
Deck Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt
Cutting Heights
1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from operator’s platform.
Blade Tip Speed
Approximately 18,500 fpm.
Blades
3 Blades at 18.00" Length
Equipment
UPC
193308240671
Starter
Electric
Steering Control
Twin levers with center fixed reference bar for ease of control forward and reverse
Front Caster Tires
15 x 6.0-6, smooth-tread, semipneumatic tires with tapered roller bearings.
Drive Tires
24x9.0-12 Hoosier Grass Master
Parking Brake
Lever-actuated internal motor brake
Tractor Frame
Welded, heavy-duty 1.5" x 3.0" tubular steel.
Blade Spindles
No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical
12-volt battery with 30-amp alternator.
Cup Holder
Yes
Standard Features
Enhanced Engine Hour Meter