Quest V-Series
Quest V-Series
The new Quest V-Series takes electric residential zero-turn mowers to the next level, with the commercial features and performance you expect from Exmark. The electric drivetrain and 42-inch Electric Series 2 cutting deck provide instant torque, while eliminating all belt-related maintenance. The Quest V-Series provides 60 minutes of runtime on four 10-Amp Flex-Force batteries, with the ability to add up to two more batteries for extended runtime.
The low center of gravity design, large drive and caster tires and comfortable operator seat keep you comfortably in control, with increased legroom for the operator. A standard deck step eases mounting and dismounting of the Quest V-Series. Maintenance is minimized with the electric powertrain, integrated hydro transmissions and just two annual grease points.
If you're looking for an electric zero-turn mower with the durability and cut quality of an Exmark, you've found it in the new Quest V-Series.
Looking for a larger, more powerful electric zero-turn mower? Check out our Lazer Z V-Series.
Quest V-Series Features
10-Amp Flex-Force Power System
Quest V-Series is powered by four 10-Amp FlexForce batteries, with the option to run up to six batteries for increased runtime.
Onboard Intelligence
Balances and optimizes power, runtime, and overload protection in real time, for peak performance in the toughest, most challenging mowing conditions.
Lower Noise Output
Exmark's electric mowers operate below the 85dB threshold OSHA uses for hearing protection. These mowers are perfect for HOAs and other quiet zones. *Exmark still recommends proper protective equipment for mower operation.
60V 6-Pod Charger
A 12-amp rapid charger enables you to charge up to six batteries to keep you charged and producing. Two charge modes: sequential rapid mode lets you charge a single 10Ah battery to full charge in just 50 minutes; and standard mode that steadily brings all batteries to full charge in unison.
- UPC 193308238302
- Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
- Caster Forks .25" thick caster yoke arms.
- Front Caster Tires 11 x 4.0-5 smooth-tread, pneumatic.
- Drive Tires 18 x 7.5-8 Turf Tech TL
- Parking Brake Foot pedal-actuated
- Tractor Frame Unibody, riveted 10-guage steel.
- Blade Spindles 7.25"-diameter cast aluminum elctric motor
- Electrical 60 volt Flex-Force
- Standard Features Lights, hour meter, cup holder, hitch and USB plug-in
- Seat Units have 16" high-back (no armrests). Hinged mounting with spring suspension. Adjustment fore and aft 3" by loosening 2 bolts and sliding seat.
- Optional Features Seat armrests
- Fuel System Electric
- Speed Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–3.5 mph (5.6 kmph) reverse.
- Drive Electric
- Fuel Capacity 6 pod 12A Rapid Charger w/dual charge modes
- Drive Description General Transmission EZ 2000
- Fuel Type Battery
- PTO Engagement Switch
- Deck Lift Standard; hand lever deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
- Carb Compliant No
- Safety Package Operator Presence Controls (OPC) and drive system interlock.
- ROPS Optional Rigid ROPS with seat belt and latch.
- Deck Style Floating Deck
- Deck Style Description Series 2 fabricated and welded steel deck. Decks have side discharge standard with the option ot bag or mulch.
- Width / Cutting Deck 42"
- Deck Construction 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 3 point suspension.
- Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat.
- Blade Tip Speed Approximately 17,000 fpm.
- Blades 2 Blades at 21.6" Length
- Width 53.8 in. (137.0 cm)
- Height 45.6 in. (113.0 cm)
- Length 75.0 in. (191.0 cm)
- Curb Weight 475
Equipment Cover, Small
Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit. Fits Quest units.
Buy Now
Sunshade
Mounts and detaches quickly behind the operator's position. Made of heavy-duty, water-repellent canvas for maximum durability. Easily removable for transport. Fits Quest.
Buy Now
2-Bag Collection System, Non-Powered
BAGGER ASM 42" QZV
Micro-Mulch System
<p> The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.</p>
Buy NowAnti-Blowout
<p> In certain conditions deck blowout can occur. Maximize bagging efficiency and air flow into your collection system hopper with this enhancement kit.</p>
Buy Now
Turf Striper
<p> Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.</p>
Buy Now
Rollover Protection System
<p> Optimize safe operation with this Roll Over Protection System.</p>
Buy Now
Slope Sensor
SLOPE SENSOR KIT 42" QZV
