Mouseover to Zoom

Lazer Z X-Series

What you get when you check all the boxes.
And with our top-of-the-line Lazer Z X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60- and 72-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.

Patented RED Technology

UltraCut Series 6 Deck

A New Level of Comfort

Productivity

Rear Discharge Deck

Tool-less Belt Removal

Model Specs


Specifications for model # LZX801GKA60600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX801V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 200-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1215

Specifications for model # LZX921GKA60600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX921V
Engine Displacement 999
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1235

Specifications for model # LZX921GKA72600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX921V
Engine Displacement 999
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)
Curb Weight 1259

Specifications for model # LZX940EKC60600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm(1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV940
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1264

Specifications for model # LZX980EKC72600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV980
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)
Curb Weight 1276

Specifications for model # LZX980EKC726T0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV980
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)
Curb Weight 1276

Specifications for model # LZX940EKC72RT0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV940
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 87.2 in. (221.5cm)
Height 70 in. (177.8 cm)
Curb Weight 1259

Specifications for model # LZX940EKC60RT0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV940
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 87.2 in. (221.5cm)
Height 70 in. (177.8 cm)
Curb Weight 1247

Specifications for model # LZX940EKC606T0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm(1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV940
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1264

Specifications for model # LZX740EKC526T0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 23 x 9.5-12, 4 ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV740
Engine Displacement 747
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 200-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 52"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 18.00" Length
Dimensions
Width 64.8 in. (164.6 cm)
Length 79.2 in. (201.2 cm)
Height 70 in. (177.8 cm)
Curb Weight 1116

Specifications for model # LZX801CKA60600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX801V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 200-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1215

Specifications for model # LZX801CKA606C1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX801V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1215

Specifications for model # LZX921GKA726C1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX921V
Engine Displacement 999
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)
Curb Weight 1294

Accessories


Accessories for model # LZX801GKA60600

KIT,HITCH

KIT, UV DRIVE 606

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

KIT, NLZ 60 REAR ANTI SCALP

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 4

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT,JACK MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT, TRASH HOLDER

KIT,MULCH 606

CATCHER-SIDE MOUNT

KIT,JACK

KIT, HYDRO SERVICE

Accessories for model # LZX921GKA60600

KIT,HITCH

KIT, UV DRIVE 606

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

KIT, NLZ 60 REAR ANTI SCALP

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 4

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT,JACK MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT, TRASH HOLDER

KIT,MULCH 606

CATCHER-SIDE MOUNT

KIT,JACK

KIT, HYDRO SERVICE

Accessories for model # LZX921GKA72600

KIT,HITCH

KIT, UV DRIVE 726

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 7

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT,JACK MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT,MULCH 726

KIT, TRASH HOLDER

KIT,JACK

KIT, HYDRO SERVICE

Accessories for model # LZX940EKC60600

KIT,HITCH

KIT, UV DRIVE 606

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

KIT, NLZ 60 REAR ANTI SCALP

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 4

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT,JACK MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT, TRASH HOLDER

KIT,MULCH 606

CATCHER-SIDE MOUNT

KIT,JACK

KIT, HYDRO SERVICE

Accessories for model # LZX980EKC72600

KIT,HITCH

KIT, UV DRIVE 726

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 7

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT,JACK MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT,MULCH 726

KIT, TRASH HOLDER

KIT,JACK

KIT, HYDRO SERVICE

Accessories for model # LZX980EKC726T0

KIT,HITCH

KIT, UV DRIVE 726

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 7

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT-MODULE, SPEED KEY

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT,MULCH 726

KIT, TRASH HOLDER

KIT,JACK

KIT,JACK MOUNT

KIT, HYDRO SERVICE

Accessories for model # LZX940EKC72RT0

KIT,HITCH

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

MAT, FOOT PANEL NLZ

KIT-FINISH CUT RD72

ASM- AIR SUSPENSION SEAT

SKID-BUMPER, DECK

KIT-MODULE, SPEED KEY

KIT-RD ANTISCALP AND WEAR

KIT, TRASH HOLDER

KIT,JACK

KIT, HYDRO SERVICE

KIT,JACK MOUNT

Accessories for model # LZX940EKC60RT0

KIT,HITCH

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

MAT, FOOT PANEL NLZ

KIT-FINISH CUT RD60

ASM- AIR SUSPENSION SEAT

SKID-BUMPER, DECK

KIT-MODULE, SPEED KEY

KIT-RD ANTISCALP AND WEAR

KIT, TRASH HOLDER

KIT,JACK

KIT, HYDRO SERVICE

KIT,JACK MOUNT

Accessories for model # LZX940EKC606T0

KIT,HITCH

KIT, UV DRIVE 606

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

KIT, NLZ 60 REAR ANTI SCALP

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 4

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT-MODULE, SPEED KEY

KIT,JACK MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT, TRASH HOLDER

KIT,MULCH 606

CATCHER-SIDE MOUNT

KIT,JACK

KIT, HYDRO SERVICE

Accessories for model # LZX740EKC526T0

KIT,HITCH

KIT, UV DRIVE 526

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 4

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT-MODULE, SPEED KEY

ULTRA VAC, DOUBLE BAG

ULTRA VAC SMALL (7 BUSHEL) DUMP FROM SEAT

KIT, TRASH HOLDER

KIT,MULCH 526

CATCHER-SIDE MOUNT

KIT,JACK

KIT,JACK MOUNT

KIT, HYDRO SERVICE

Accessories for model # LZX801CKA60600

KIT,HITCH

KIT, UV DRIVE 606

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

KIT, NLZ 60 REAR ANTI SCALP

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 4

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT,JACK MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT, TRASH HOLDER

KIT,MULCH 606

CATCHER-SIDE MOUNT

KIT,JACK

KIT, HYDRO SERVICE

Accessories for model # LZX801CKA606C1

KIT,HITCH

KIT, UV DRIVE 606

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

KIT, NLZ 60 REAR ANTI SCALP

KIT-STRIPER VERT ADJUST 4

KIT, HYDRO SERVICE

KIT,JACK MOUNT

KIT,JACK

CATCHER-SIDE MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT,MULCH 606

KIT, TRASH HOLDER

KIT-MOUNTING WEIGHT

Accessories for model # LZX921GKA726C1

KIT,HITCH

KIT, UV DRIVE 726

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

KIT,FRPS LIGHT

KIT-STRIPER VERT ADJUST 7

KIT, HYDRO SERVICE

KIT,JACK MOUNT

KIT,JACK

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT,MULCH 726

KIT, TRASH HOLDER

KIT-MOUNTING WEIGHT

Warranty


Lazer Z 5 Year Limited Warranty

We have you covered. We take great pride in the quality of our products and stand behind every single one. You can view, download, or print the warranty statement for your equipment here. 

Five year Lazer Z warranty is effective for Lazer Z products purchased August 1, 2016 or later. Refer to your owner's manual for the statement of warranty coverage for units purchased before this date.

Reviews


REVIEW SNAPSHOT®

by PowerReviews
ExmarkLazer Z X-Series
 
4.8

(based on 36 reviews)

Ratings Distribution

  • 5 Stars

     

    (30)

  • 4 Stars

     

    (5)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Steering / controllability (32)
  • Cut quality (31)
  • Heavy duty construction (31)
  • Zero-turning radius (31)
  • Ease of maintenance (30)

Cons

  • Poor fuel efficiency (3)

Best Uses

  • Large lawns (2+ acres) (30)
  • Professional / commercial mowing (19)
  • Residential mowing (17)
  • Medium lawns (1-2 acres) (14)
  • Side discharge (12)
    • Engine Brand?:
    • Kawasaki (16), Kohler (11)
    • Deck Size?:
    • 60" (18)
    • Reviewer Profile:
    • Landscape professional (16), Homeowner (14), Acreage owner (13), Grounds manager (4), Farmer (3)
    • Personal or Professional Use?:
    • Personal (22), Professional (19)

Most Liked Positive Review

 

Nobody Does It Better

Hands down best mower on the market. This mower saves time and money. When it comes to fall clean-ups this mower is amazing with an Ultra Vac on it. I currently own 14...Read complete review

Hands down best mower on the market. This mower saves time and money. When it comes to fall clean-ups this mower is amazing with an Ultra Vac on it. I currently own 14 Exmark's and love everyone of them. Exmark is the only brand of mowers I will buy!

VS

Most Liked Negative Review

 

superior steering mower

I am on my second Exmark lazer z x series. I enjoy using the mower except in wet grass it clumps too much. I used to think this was the best zero turn rider...Read complete review

I am on my second Exmark lazer z x series. I enjoy using the mower except in wet grass it clumps too much. I used to think this was the best zero turn rider on the market until I tried a Scag tiger cat 2. The quality of cut in wet grass is far superior on the Scag. The drive system on the Exmark is better ,but my dealer charged 200.00 to change the filters and fluid. I am going back to Scag after 15 years of using Exmark. The anti-scalp wheels on this mower have been a problem for 15 years.

Reviewed by 36 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

Excellent Mower for full time commercial use

By 

from Dexter, MI

About Me Landscape Professional

Verified Buyer

Pros

  • Comfort & Ergonomics
  • Cut Quality
  • Ease of Maintenance
  • Engine Performance / Brand
  • Heavy Duty Construction
  • Speed
  • Steering / Controllability

Cons

    Best Uses

    • Large Lawns (2+ acres)
    • Medium Lawns (1-2 acres)
    • Professional / Commercial Mowing
    • Residential Mowing
    • Side Discharge
    • Small Lawns (Less than 1 acre)
    • Striping

    Comments about Exmark Lazer Z X-Series:

    We love our Exmark mowers. The design is much simpler than other mower manufactures we have. As a result maintenance is much faster.

    (3 of 3 customers found this review helpful)

     
    5.0

    I would buy this mower again

    By 

    from Fort Collins, CO

    About Me Field Mowing Contractor

    Verified Buyer

    Pros

    • Comfort & Ergonomics
    • Cut Quality
    • Ease of Maintenance
    • Ease of Use
    • Engine Performance / Brand
    • Fuel Efficiency
    • Heavy Duty Construction
    • Speed
    • Steering / Controllability
    • Styling / Appearance
    • Zero-Turning Radius

    Cons

      Best Uses

      • Field grass mowing
      • Large Lawns (2+ acres)
      • Side Discharge

      Comments about Exmark Lazer Z X-Series:

      We are a large field mowing contractor and use equipment in the roughest conditions. Rides great, mows great.

      (1 of 2 customers found this review helpful)

       
      3.0

      superior steering mower

      By 

      from Martin Tennessee

      About Me Landscape Professional

      Pros

      • Ease of Use
      • Engine Performance / Brand
      • Fuel Efficiency
      • Steering / Controllability
      • Zero-Turning Radius

      Cons

      • Difficult Maintenance
      • poor anti-scalp wheels
      • Poor Cut Quality

      Best Uses

      • Medium Lawns (1-2 acres)

      Comments about Exmark Lazer Z X-Series:

      I am on my second Exmark lazer z x series. I enjoy using the mower except in wet grass it clumps too much. I used to think this was the best zero turn rider on the market until I tried a Scag tiger cat 2. The quality of cut in wet grass is far superior on the Scag. The drive system on the Exmark is better ,but my dealer charged 200.00 to change the filters and fluid. I am going back to Scag after 15 years of using Exmark. The anti-scalp wheels on this mower have been a problem for 15 years.

       
      5.0

      the best

      By 

      from west monroe la

      About Me Homeowner

      Verified Buyer

      Pros

      • Ease of Maintenance
      • Ease of Use
      • Heavy Duty Construction
      • Steering / Controllability

      Cons

        Best Uses

        • Large Lawns (2+ acres)

        Comments about Exmark Lazer Z X-Series:

        the best

        (1 of 1 customers found this review helpful)

         
        4.0

        Great Product!

        By 

        from South Alabama

        About Me Acreage Owner, Homeowner

        Verified Buyer

        Pros

        • Comfort & Ergonomics
        • Cut Quality
        • Ease of Maintenance
        • Ease of Use
        • Engine Performance / Brand
        • Heavy Duty Construction
        • Speed
        • Steering / Controllability
        • Styling / Appearance
        • Zero-Turning Radius

        Cons

          Best Uses

          • Large Lawns (2+ acres)
          • Medium Lawns (1-2 acres)
          • Professional / Commercial Mowing
          • Residential Mowing
          • Side Discharge

          Comments about Exmark Lazer Z X-Series:

          Great Product! I don't have a local eXmark dealer in my town...but after testing a husquevarna, grasshopper, gravely, and dixie chopper I found that the eXmark was a combination of all the things I liked about the mowers I tested combined into one...the riding comfort, the cut quality and durability of the eXmark was top quality...

          Service and delivery comments:

          Delivered to my house very promptly...

           
          5.0

          I love my Ex Mark

          By 

          from Pleasant Plain Ohio

          About Me Acreage Owner, Homeowner

          Verified Buyer

          Pros

          • Comfort & Ergonomics
          • Cut Quality
          • Ease of Maintenance
          • Ease of Use
          • Engine Performance / Brand
          • Fuel Efficiency
          • Heavy Duty Construction
          • Speed
          • Steering / Controllability
          • Styling / Appearance
          • Zero-Turning Radius

          Cons

          • Gas gage is not working

          Best Uses

          • Large Lawns (2+ acres)

          Comments about Exmark Lazer Z X-Series:

          I absolutely love my Ex Mark except my Husband keeps stealing it

          Service and delivery comments:

          Very nice Service and prompt Delivery

           
          5.0

          I would buy another Exmark

          By 

          from cadillac, michigan

          About Me Landscape Professional

          Verified Buyer

          Pros

          • Availability & Performance of Accessories
          • Comfort & Ergonomics
          • Cut Quality
          • Ease of Maintenance
          • Ease of Use
          • Engine Performance / Brand
          • Fuel Efficiency
          • Heavy Duty Construction
          • Speed
          • Steering / Controllability
          • Styling / Appearance
          • Zero-Turning Radius

          Cons

            Best Uses

              Comments about Exmark Lazer Z X-Series:

              I use my new exmark 5 days a week mowing professionally residential, and commercial accounts, the exmark mower is very efficient, and has a nice clean cut... I recommend this mower to anyone that wants to start a lawncare business or that has a very big lawn to take care of.

               
              5.0

              The best piece of equipment I ever bought.

              By 

              from Safety Harbor Florida

              About Me Landscape Professional

              Verified Buyer

              Pros

              • Cut Quality
              • Ease of Maintenance
              • Ease of Use
              • Engine Performance / Brand
              • Heavy Duty Construction
              • Speed
              • Steering / Controllability
              • Zero-Turning Radius

              Cons

                Best Uses

                • Mulching
                • Residential Mowing
                • Small Lawns (Less than 1 acre)

                Comments about Exmark Lazer Z X-Series:

                It makes me money ever day.

                Service and delivery comments:

                Service is great.

                 
                5.0

                Great product

                By 

                from Simpsonville, ky

                About Me Homeowner

                Verified Buyer

                Pros

                • Availability & Performance of Accessories
                • Comfort & Ergonomics
                • Cut Quality
                • Ease of Maintenance
                • Ease of Use
                • Engine Performance / Brand
                • Fuel Efficiency
                • Heavy Duty Construction
                • Speed
                • Steering / Controllability
                • Styling / Appearance
                • Zero-Turning Radius

                Cons

                  Best Uses

                  • Large Lawns (2+ acres)
                  • Residential Mowing

                  Comments about Exmark Lazer Z X-Series:

                  Great product

                  (3 of 3 customers found this review helpful)

                   
                  5.0

                  I had a Scag Turf Tiger but changed brands ...

                  By 

                  from Columbia, PA

                  About Me Acreage Owner

                  Verified Buyer

                  Pros

                  • Comfort & Ergonomics
                  • Cut Quality
                  • Ease of Maintenance
                  • Ease of Use
                  • Engine Performance / Brand
                  • Fuel Efficiency
                  • Speed
                  • Steering / Controllability
                  • Styling / Appearance
                  • Zero-Turning Radius

                  Cons

                    Best Uses

                    • Large Lawns (2+ acres)
                    • Residential Mowing

                    Comments about Exmark Lazer Z X-Series:

                    My new ExMark handles much better than the comparable Scag
                    My wife and neighbors have commented how nice my lawn looks since I switched brands.
                    It is also "crazy fast" and very comfortable !

                    Displaying reviews 1-10

                    Back to top

                    Previous | Next »