Mouseover to Zoom

Lazer Z X-Series

What you get when you check all the boxes.
And with our top-of-the-line Lazer Z X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60- and 72-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.

Features


Exmark Product Thumbnail

Patented RED Technology

Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.

Exmark Product Thumbnail

UltraCut Series 6 Deck

This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Exmark Product Thumbnail

A New Level of Comfort

Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.

Exmark Product Thumbnail

Productivity

Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.

Exmark Product Thumbnail

Rear Discharge Deck

Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.

Exmark Product Thumbnail

Tool-less Belt Removal

Deck and hydro belt can be installed without using any tools.

Model Specs


Specifications for model # LZX740EKC526W0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 23 x 9.5-12, 4 ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 20-amp alternator.
Onboard Intelligence RED Technology
Power Components
Engine Brand Kohler®
Engine Model ECV740
Engine Displacement 747
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z X-Series 25 HP* Koh EFI EGov ECV740 w/52" UltraCut Series 6 Deck, RED, Susp Seat & Narrow Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 52"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 18.00" Length
Dimensions
Width 64.8 in. (164.6 cm)
Length 79.2 in. (201.2 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZX801CKA60600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX801V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z X-Series 25.5 HP* Kaw FX801V w/60" UltraCut Series 6 Deck, Susp Seat & Wide Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1215

Specifications for model # LZX801CKA606C1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX801V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z X-Series 25.5 HP* Kaw FX801V w/60" UltraCut Series 6 Deck, Susp Platform & Wide Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1215

Specifications for model # LZX801GKA60600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX801V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z X-Series 25.5 HP* Kaw FX801V w/60" UltraCut Series 6 Deck, Susp Seat & Wide Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1215

Specifications for model # LZX801GKA606NP

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24” Exmark TRACTUS® Airless Tire
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX801V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z X-Series 25.5 HP* Kaw FX801V w/60" UltraCut Series 6 Deck, Susp Seat & Wide Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZX921GKA60600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX921V
Engine Displacement 999
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z X-Series 31 HP* Kaw FX921V w/ 60" UltraCut Series 6 Deck

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1235

Specifications for model # LZX921GKA72600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX921V
Engine Displacement 999
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z X-Series 31 HP* Kaw FX921V w/72" UltraCut Series 6 Deck

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)
Curb Weight 1259

Specifications for model # LZX921GKA726C1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX921V
Engine Displacement 999
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z X-Series 31 HP* Kaw FX921V w/72" UltraCut Series 6 Deck, Susp Platform & Wide Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)
Curb Weight 1294

Specifications for model # LZX940EKC606W0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Onboard Intelligence RED Technology
Power Components
Engine Brand Kohler®
Engine Model ECV940
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z X-Series 35 HP* Koh EFI EGov ECV940 w/60" UltraCut Series 6 Deck, RED, Susp Seat & Wide Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZX940EKC60RW0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Onboard Intelligence RED Technology
Power Components
Engine Brand Kohler®
Engine Model ECV940
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z X-Series 35 HP* Koh EFI EGov ECV940 w/60" UltraCut RD Deck, RED, Susp Seat & Wide Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 66.2 in. (168.1 cm)
Length 87.2 in. (221.5cm)
Height 70 in. (177.8 cm)

Specifications for model # LZX940EKC72RW0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Onboard Intelligence RED Technology
Power Components
Engine Brand Kohler®
Engine Model ECV940
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z X-Series 35 HP* Koh EFI EGov ECV940 w/72" UltraCut RD Deck, RED, Susp Seat & Wide Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 78.2 in. (198.6 cm)
Length 87.2 in. (221.5cm)
Height 70 in. (177.8 cm)

Specifications for model # LZX980EKC726W0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Onboard Intelligence RED Technology
Power Components
Engine Brand Kohler®
Engine Model ECV980
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Model Description Lazer Z X-Series 38 HP* Koh EFI EGov ECV980 w/72" UltraCut Series 6 Deck, RED, Susp Seat & Wide Semi-Pneum

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)

Accessories


Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 109-9625

KIT, UV DRIVE 526

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK526

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD7

The UltraVac X Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 7 bushel capacity.

Exmark Product Thumbnail

UltraVac 2-Bag Collection System

Part# LZUV2B

Switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 109-9627

KIT, UV DRIVE 606

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 109-9627

KIT, UV DRIVE 606

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Models: Parts Only

Suspension Platform Weight Adapter Kit

Part# 132-5092

Used with the UV completing kit, creates correct spacing to accommodate the UV weights with suspension platform

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Models: Parts Only

Pedal Adapter Kit

Part# 135-0100

KIT-ADAPTER PEDAL

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 109-9627

KIT, UV DRIVE 606

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 109-9627

KIT, UV DRIVE 606

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 109-9627

KIT, UV DRIVE 606

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK726

The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 109-9629

KIT, UV DRIVE 726

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6656

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 109-9629

KIT, UV DRIVE 726

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6656

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK726

The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Models: Parts Only

Suspension Platform Weight Adapter Kit

Part# 132-5092

Used with the UV completing kit, creates correct spacing to accommodate the UV weights with suspension platform

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Models: Parts Only

Pedal Adapter Kit

Part# 135-0100

KIT-ADAPTER PEDAL

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 109-9627

KIT, UV DRIVE 606

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Models: Parts Only

White Non-Marking Side Bumper

Part# 126-0854

Perfect for restricted and sensitive mowing areas, these durable bumpers eliminate the marking left behind by incidental contact.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Anti-Scalp and Side Wear Bar Kit

Part# 127-6650

Protect your rear discharge cutting deck from impact, and your turf from tearing. This kit gives you peace of mind when mowing in tight spaces. The tapered anti-scalp roller help to prevent turf gouging in sharp turns.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Models: Parts Only

Finish Cut Baffles

Part# 116-8547

Maximize cut quality in the toughest conditions with this finish cut baffle kit.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Models: Parts Only

Finish Cut Baffles

Part# 116-8548

Maximize cut quality in the toughest conditions with this finish cut baffle kit.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Models: Parts Only

White Non-Marking Side Bumper

Part# 126-0854

Perfect for restricted and sensitive mowing areas, these durable bumpers eliminate the marking left behind by incidental contact.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Anti-Scalp and Side Wear Bar Kit

Part# 127-6650

Protect your rear discharge cutting deck from impact, and your turf from tearing. This kit gives you peace of mind when mowing in tight spaces. The tapered anti-scalp roller help to prevent turf gouging in sharp turns.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6656

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Micro-Mulch System

Part# MK726

The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 109-9629

KIT, UV DRIVE 726

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Warranty


Lazer Z 5 Year Limited Warranty

We have you covered. We take great pride in the quality of our products and stand behind every single one. You can view, download, or print the warranty statement for your equipment here.�

Five year Lazer Z warranty is effective for Lazer Z products purchased August 1, 2016 or later. Refer to your owner's manual for the statement of warranty coverage for units purchased before this date.

Reviews


REVIEW SNAPSHOT®

by PowerReviews
ExmarkLazer Z X-Series
 
4.9

(based on 72 reviews)

Ratings Distribution

  • 5 Stars

     

    (64)

  • 4 Stars

     

    (7)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Cut quality (64)
  • Heavy duty construction (61)
  • Steering / controllability (61)
  • Zero-turning radius (60)
  • Speed (59)

Cons

  • Poor fuel efficiency (9)

Best Uses

  • Large lawns (2+ acres) (62)
  • Professional / commercial mowing (41)
  • Residential mowing (29)
  • Medium lawns (1-2 acres) (28)
  • Side discharge (27)
    • Engine Brand?:
    • Kawasaki (43), Kohler (18), Exmark (3)
    • Deck Size?:
    • 60" (49), 72" (5)
    • Reviewer Profile:
    • Landscape professional (34), Acreage owner (27), Homeowner (26), Farmer (9), Grounds manager (8)
    • Personal or Professional Use?:
    • Personal (41), Professional (39)

Most Liked Positive Review

 

Nobody Does It Better

Hands down best mower on the market. This mower saves time and money. When it comes to fall clean-ups this mower is amazing with an Ultra Vac on it. I currently own 14...Read complete review

Hands down best mower on the market. This mower saves time and money. When it comes to fall clean-ups this mower is amazing with an Ultra Vac on it. I currently own 14 Exmark's and love everyone of them. Exmark is the only brand of mowers I will buy!

VS

Most Liked Negative Review

 

superior steering mower

I am on my second Exmark lazer z x series. I enjoy using the mower except in wet grass it clumps too much. I used to think this was the best zero turn rider...Read complete review

I am on my second Exmark lazer z x series. I enjoy using the mower except in wet grass it clumps too much. I used to think this was the best zero turn rider on the market until I tried a Scag tiger cat 2. The quality of cut in wet grass is far superior on the Scag. The drive system on the Exmark is better ,but my dealer charged 200.00 to change the filters and fluid. I am going back to Scag after 15 years of using Exmark. The anti-scalp wheels on this mower have been a problem for 15 years.

Reviewed by 72 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

Great Machine!!! Unbeliveable Quality

By 

from Florida

About Me Acreage Owner, Homeowner

Verified Buyer

Pros

  • Cut Quality
  • Ease of Maintenance
  • Ease of Use
  • Heavy Duty Construction

Cons

    Best Uses

    • Large Lawns (2+ acres)
    • Medium Lawns (1-2 acres)

    Comments about Exmark Lazer Z X-Series:

    I use the product in several different applications on the ranch. From mowing around my house or mowing around the barn.

     
    5.0

    Great mower.

    By 

    from orefield

    About Me Acreage Owner, Farmer, Grounds Manager

    Verified Buyer

    Pros

    • Availability & Performance of Accessories
    • Comfort & Ergonomics
    • Cut Quality
    • Ease of Maintenance
    • Ease of Use
    • Engine Performance / Brand
    • Fuel Efficiency
    • Heavy Duty Construction
    • Speed
    • Steering / Controllability
    • Styling / Appearance
    • Zero-Turning Radius

    Cons

      Best Uses

      • Large Lawns (2+ acres)
      • Mulching
      • Professional / Commercial Mowing
      • Side Discharge
      • Striping

      Comments about Exmark Lazer Z X-Series:

      this is the only mower i would use.

      Service and delivery comments:

      Great service department and parts quick to get

       
      5.0

      The absolute best commercial mowers made

      By 

      from Lakeland Florida

      About Me Landscape Professional

      Verified Buyer

      Pros

      • Availability & Performance of Accessories
      • Comfort & Ergonomics
      • Cut Quality
      • Ease of Maintenance
      • Ease of Use
      • Engine Performance / Brand
      • Fuel Efficiency
      • Heavy Duty Construction
      • Speed
      • Steering / Controllability
      • Styling / Appearance
      • Zero-Turning Radius

      Cons

        Best Uses

        • Large Lawns (2+ acres)
        • Medium Lawns (1-2 acres)
        • Mulching
        • Professional / Commercial Mowing
        • Side Discharge
        • Small Lawns (Less than 1 acre)

        Comments about Exmark Lazer Z X-Series:

        I have been in business for over 21 years, I have used most popular brands of commercial equipment and none compare to the quality and performance of Exmark turf equipment. I don't waste my time with other brands of commercial cutting equipment. I utilize both Lazer z- x series and Vantage s-series style equipment. Keep it up.

        Service and delivery comments:

        Warranty service @ my dealer has been awesome. Really only ever had (1) problem, and it was with a Kawasaki engine and not the mower. But I swear on Kawasaki engine's, and always will.

         
        5.0

        I should have bought this mower years ago!!!!!

        By 

        from Huntsville Alabama

        About Me Landscape Professional

        Verified Buyer

        Pros

        • Availability & Performance of Accessories
        • Comfort & Ergonomics
        • Cut Quality
        • Ease of Maintenance
        • Ease of Use
        • Engine Performance / Brand
        • Fuel Efficiency
        • Heavy Duty Construction
        • Speed
        • Steering / Controllability
        • Styling / Appearance
        • Zero-Turning Radius

        Cons

          Best Uses

          • Large Lawns (2+ acres)
          • Medium Lawns (1-2 acres)
          • Mulching
          • Professional / Commercial Mowing
          • Residential Mowing
          • Side Discharge
          • Small Lawns (Less than 1 acre)
          • Striping

          Comments about Exmark Lazer Z X-Series:

          This mower has cut my mowing time and payroll in half. I only have to run the lawns over one time instead of twice and sometimes 3 times to get the quality cut I want.

           
          5.0

          Gets it done

          By 

          from Triad, NC

          About Me Grounds Manager, Landscape Professional

          Verified Buyer

          Pros

          • Comfort & Ergonomics
          • Cut Quality
          • Ease of Maintenance
          • Ease of Use
          • Engine Performance / Brand
          • Fuel Efficiency
          • Heavy Duty Construction
          • Speed
          • Steering / Controllability
          • Styling / Appearance
          • Zero-Turning Radius

          Cons

            Best Uses

            • Large Lawns (2+ acres)
            • Medium Lawns (1-2 acres)
            • Professional / Commercial Mowing
            • Residential Mowing
            • Striping

            Comments about Exmark Lazer Z X-Series:

            Wish it would cut well while going full speed (pipe dream I know but keep working on it)

             
            5.0

            good unit

            By 

            from Detroit mi

            About Me Acreage Owner, Landscape Professional

            Verified Buyer

            Pros

            • Ease of Maintenance
            • Ease of Use
            • Heavy Duty Construction
            • Steering / Controllability

            Cons

              Best Uses

              • Medium Lawns (1-2 acres)
              • Mulching
              • Professional / Commercial Mowing
              • Residential Mowing
              • Side Discharge
              • Small Lawns (Less than 1 acre)

              Comments about Exmark Lazer Z X-Series:

              Very satisfied with this unit

               
              5.0

              Very happy with this Lawn mower

              By 

              from Algonquin, IL

              About Me Grounds Manager

              Verified Buyer

              Pros

              • Comfort & Ergonomics
              • Cut Quality
              • Ease of Use
              • Speed
              • Steering / Controllability
              • Zero-Turning Radius

              Cons

                Best Uses

                • Professional / Commercial Mowing

                Comments about Exmark Lazer Z X-Series:

                We can run faster with a good cut

                Service and delivery comments:

                Happy with our service company

                (2 of 2 customers found this review helpful)

                 
                5.0

                Purchased my second Lazer Z after 12 years

                By 

                from Eunice, La

                About Me Homeowner

                Verified Buyer

                Pros

                • Comfort & Ergonomics
                • Cut Quality
                • Ease of Maintenance
                • Ease of Use
                • Heavy Duty Construction
                • Speed
                • Steering / Controllability
                • Styling / Appearance
                • Zero-Turning Radius

                Cons

                • Poor Fuel Efficiency

                Best Uses

                • Large Lawns (2+ acres)
                • Residential Mowing

                Comments about Exmark Lazer Z X-Series:

                This is my second Lazer Z that I purchase. My 2005 machine is a great machine with no major issues over the 12 years. Decided that it was time to purchase a new machine that I know will last and a more comfortable ride. With the value of my old machine I am able to sell it and invest that money in the new mower. Only complaint I have is the model I purchased does not come with the Koehler engine that I know and love.

                Service and delivery comments:

                I was taken back when I purchased the mower to see that there where a number of charges tacked on. Delivery fee, which I picked it up from dealer, setup fee, public officials fee, things one find when purchasing a vehicle but not a mower. I would suggest you watch for these underline fees.

                 
                5.0

                Yes

                By 

                from Missouri

                About Me Landscape Professional

                Verified Buyer

                Pros

                • Availability & Performance of Accessories
                • Comfort & Ergonomics
                • Cut Quality
                • Ease of Maintenance
                • Ease of Use
                • Engine Performance / Brand
                • Heavy Duty Construction
                • Speed
                • Steering / Controllability
                • Styling / Appearance
                • Zero-Turning Radius

                Cons

                  Best Uses

                  • Bagging
                  • Large Lawns (2+ acres)
                  • Medium Lawns (1-2 acres)
                  • Professional / Commercial Mowing
                  • Small Lawns (Less than 1 acre)

                  Comments about Exmark Lazer Z X-Series:

                  Like them all I have 20 +

                   
                  5.0

                  My second Exmark Lazer Z!

                  By 

                  from Campbellsville,Ky

                  About Me Acreage Owner, Homeowner

                  Verified Reviewer

                  Pros

                  • Availability & Performance of Accessories
                  • Comfort & Ergonomics
                  • Cut Quality
                  • Ease of Maintenance
                  • Ease of Use
                  • Engine Performance / Brand
                  • Heavy Duty Construction
                  • Speed
                  • Steering / Controllability
                  • Styling / Appearance
                  • Zero-Turning Radius

                  Cons

                    Best Uses

                    • Bagging
                    • Large Lawns (2+ acres)
                    • Medium Lawns (1-2 acres)
                    • Mulching
                    • Professional / Commercial Mowing
                    • Residential Mowing
                    • Side Discharge
                    • Striping

                    Comments about Exmark Lazer Z X-Series:

                    This is my second Exmark and great enprovements. The seat is great, controls are quick. Easy to maintain and keep clean. Did I say it cuts grass great also the first time!!

                    Displaying reviews 1-10

                    Back to top

                    Previous | Next »