Mouseover to Zoom

Lazer Z X-Series

What you get when you check all the boxes.
And with our top-of-the-line Lazer Z X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60- and 72-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.

Patented RED Technology

UltraCut Series 6 Deck

A New Level of Comfort

Productivity

Rear Discharge Deck

Tool-less Belt Removal

Model Specs


Specifications for model # LZX801GKA60600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX801V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 200-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1215

Specifications for model # LZX921GKA60600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX921V
Engine Displacement 999
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1235

Specifications for model # LZX921GKA72600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX921V
Engine Displacement 999
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)
Curb Weight 1259

Specifications for model # LZX940EKC60600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm(1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV940
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1264

Specifications for model # LZX980EKC72600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV980
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)
Curb Weight 1276

Specifications for model # LZX980EKC726T0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV980
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)
Curb Weight 1276

Specifications for model # LZX940EKC72RT0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV940
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 87.2 in. (221.5cm)
Height 70 in. (177.8 cm)
Curb Weight 1259

Specifications for model # LZX940EKC60RT0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV940
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 87.2 in. (221.5cm)
Height 70 in. (177.8 cm)
Curb Weight 1247

Specifications for model # LZX940EKC606T0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm(1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV940
Engine Displacement 999
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1264

Specifications for model # LZX740EKC526T0

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 23 x 9.5-12, 4 ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 25-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV740
Engine Displacement 747
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,650 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 200-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 52"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 18.00" Length
Dimensions
Width 64.8 in. (164.6 cm)
Length 79.2 in. (201.2 cm)
Height 70 in. (177.8 cm)
Curb Weight 1116

Specifications for model # LZX801CKA60600

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX801V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 200-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1215

Specifications for model # LZX801CKA606C1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX801V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1215

Specifications for model # LZX921GKA726C1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX921V
Engine Displacement 999
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)
Curb Weight 1294

Accessories


Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Completing Kit

Part# 109-9627

Ultra Vac Drive 606 Completing Kit

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Extended Drive Lever Kit

Part# 116-1065

To maximize operator comfort when a little more room is needed.

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Equipment Cover (Large)

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Hydro Maintenance Kit

Part# 116-3270

Kit includes: 4 Bottles Exmark® Premium Hydraulic Oil, 1 Belt and 2 Hydro Filters

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Floor Pan Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Turf Striper

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Operator-Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Completing Kit

Part# 109-9627

Ultra Vac Drive 606 Completing Kit

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Extended Drive Lever Kit

Part# 116-1065

To maximize operator comfort when a little more room is needed.

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Equipment Cover (Large)

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Hydro Maintenance Kit

Part# 116-3270

Kit includes: 4 Bottles Exmark® Premium Hydraulic Oil, 1 Belt and 2 Hydro Filters

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Floor Pan Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Turf Striper

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Operator-Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Completing Kit

Part# 109-9629

Ultra Vac Drive 726 Completing Kit

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Extended Drive Lever Kit

Part# 116-1065

To maximize operator comfort when a little more room is needed.

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Hydro Maintenance Kit

Part# 116-3270

Kit includes: 4 Bottles Exmark® Premium Hydraulic Oil, 1 Belt and 2 Hydro Filters

Floor Pan Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Turf Striper

Part# 116-6656

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Operator-Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Micro-Mulch System

Part# MK726

The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Completing Kit

Part# 109-9627

Ultra Vac Drive 606 Completing Kit

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Extended Drive Lever Kit

Part# 116-1065

To maximize operator comfort when a little more room is needed.

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Equipment Cover (Large)

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Hydro Maintenance Kit

Part# 116-3270

Kit includes: 4 Bottles Exmark® Premium Hydraulic Oil, 1 Belt and 2 Hydro Filters

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Floor Pan Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Turf Striper

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Operator-Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Completing Kit

Part# 109-9629

Ultra Vac Drive 726 Completing Kit

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Extended Drive Lever Kit

Part# 116-1065

To maximize operator comfort when a little more room is needed.

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Hydro Maintenance Kit

Part# 116-3270

Kit includes: 4 Bottles Exmark® Premium Hydraulic Oil, 1 Belt and 2 Hydro Filters

Floor Pan Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Turf Striper

Part# 116-6656

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Operator-Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Micro-Mulch System

Part# MK726

The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Completing Kit

Part# 109-9629

Ultra Vac Drive 726 Completing Kit

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Extended Drive Lever Kit

Part# 116-1065

To maximize operator comfort when a little more room is needed.

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Hydro Maintenance Kit

Part# 116-3270

Kit includes: 4 Bottles Exmark® Premium Hydraulic Oil, 1 Belt and 2 Hydro Filters

Floor Pan Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Turf Striper

Part# 116-6656

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Operator-Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

RED Lockout Module

Part# 126-3671

Maximize fuel savings on RED equipment units with this easy-to-install lockout module. Embedded with sophisticated computer technology, this module will keep your mower in Efficient Mode, regardless of mowing conditions.

3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Micro-Mulch System

Part# MK726

The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Extended Drive Lever Kit

Part# 116-1065

To maximize operator comfort when a little more room is needed.

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Hydro Maintenance Kit

Part# 116-3270

Kit includes: 4 Bottles Exmark® Premium Hydraulic Oil, 1 Belt and 2 Hydro Filters

Floor Pan Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Finish Cut Baffles

Part# 116-8548

Maximize cut quality in the toughest conditions with this finish cut baffle kit.

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

White Deck Bumpers

Part# 126-0854

Perfect for restricted and sensitive mowing areas, these durable bumpers eliminate the marking left behind by incidental contact.

RED Lockout Module

Part# 126-3671

Maximize fuel savings on RED equipment units with this easy-to-install lockout module. Embedded with sophisticated computer technology, this module will keep your mower in Efficient Mode, regardless of mowing conditions.

Anti-Scalp Roller Kit

Part# 127-6650

Protect your rear discharge cutting deck from impact, and your turf from tearing. This kit gives you peace of mind when mowing in tight spaces. The tapered anti-scalp roller help to prevent turf gouging in sharp turns.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Extended Drive Lever Kit

Part# 116-1065

To maximize operator comfort when a little more room is needed.

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Equipment Cover (Large)

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Hydro Maintenance Kit

Part# 116-3270

Kit includes: 4 Bottles Exmark® Premium Hydraulic Oil, 1 Belt and 2 Hydro Filters

Floor Pan Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Finish Cut Baffles

Part# 116-8547

Maximize cut quality in the toughest conditions with this finish cut baffle kit.

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

White Deck Bumpers

Part# 126-0854

Perfect for restricted and sensitive mowing areas, these durable bumpers eliminate the marking left behind by incidental contact.

RED Lockout Module

Part# 126-3671

Maximize fuel savings on RED equipment units with this easy-to-install lockout module. Embedded with sophisticated computer technology, this module will keep your mower in Efficient Mode, regardless of mowing conditions.

Anti-Scalp Roller Kit

Part# 127-6650

Protect your rear discharge cutting deck from impact, and your turf from tearing. This kit gives you peace of mind when mowing in tight spaces. The tapered anti-scalp roller help to prevent turf gouging in sharp turns.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Completing Kit

Part# 109-9627

Ultra Vac Drive 606 Completing Kit

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Extended Drive Lever Kit

Part# 116-1065

To maximize operator comfort when a little more room is needed.

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Equipment Cover (Large)

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Hydro Maintenance Kit

Part# 116-3270

Kit includes: 4 Bottles Exmark® Premium Hydraulic Oil, 1 Belt and 2 Hydro Filters

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Floor Pan Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Turf Striper

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Operator-Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

RED Lockout Module

Part# 126-3671

Maximize fuel savings on RED equipment units with this easy-to-install lockout module. Embedded with sophisticated computer technology, this module will keep your mower in Efficient Mode, regardless of mowing conditions.

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Completing Kit

Part# 109-9625

Ultra Vac Completing Kit

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Extended Drive Lever Kit

Part# 116-1065

To maximize operator comfort when a little more room is needed.

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Equipment Cover (Large)

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Hydro Maintenance Kit

Part# 116-3270

Kit includes: 4 Bottles Exmark® Premium Hydraulic Oil, 1 Belt and 2 Hydro Filters

Floor Pan Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Turf Striper

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Operator-Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

RED Lockout Module

Part# 126-3671

Maximize fuel savings on RED equipment units with this easy-to-install lockout module. Embedded with sophisticated computer technology, this module will keep your mower in Efficient Mode, regardless of mowing conditions.

UltraVac 2-Bagger Collection System

Part# LZUV2B

Switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

UltraVac Quick Dump Collection System

Part# LZUVQD7

The UltraVac X Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 7 bushel capacity.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Micro-Mulch System

Part# MK526

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Completing Kit

Part# 109-9627

Ultra Vac Drive 606 Completing Kit

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Extended Drive Lever Kit

Part# 116-1065

To maximize operator comfort when a little more room is needed.

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Equipment Cover (Large)

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Hydro Maintenance Kit

Part# 116-3270

Kit includes: 4 Bottles Exmark® Premium Hydraulic Oil, 1 Belt and 2 Hydro Filters

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Floor Pan Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Turf Striper

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Operator-Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Completing Kit

Part# 109-9627

Ultra Vac Drive 606 Completing Kit

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Equipment Cover (Large)

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Turf Striper

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Suspension Platform Weight Adapter Kit

Part# 132-5092

Used with the UV completing kit, creates correct spacing to accommodate the UV weights with suspension platform

Hitch Kit

Part# 109-9487

Increase the versatility of your Lazer with this hitch kit (80 pound tow capacity).

Completing Kit

Part# 109-9629

Ultra Vac Drive 726 Completing Kit

Harness Add-on Accessory Kit

Part# 109-9798

Harness Add-on Accessory Kit

ROPS Sun Shade

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Hella® Work Lamp Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Turf Striper

Part# 116-6656

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

KIT, HYDRO SERVICE

Part# 126-8103

KIT,HYDRO SERVICE

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Micro-Mulch System

Part# MK726

The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.

Trash Container Kit

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Suspension Platform Weight Adapter Kit

Part# 132-5092

Used with the UV completing kit, creates correct spacing to accommodate the UV weights with suspension platform

Warranty


Lazer Z 5 Year Limited Warranty

We have you covered. We take great pride in the quality of our products and stand behind every single one. You can view, download, or print the warranty statement for your equipment here. 

Five year Lazer Z warranty is effective for Lazer Z products purchased August 1, 2016 or later. Refer to your owner's manual for the statement of warranty coverage for units purchased before this date.

Reviews


REVIEW SNAPSHOT®

by PowerReviews
ExmarkLazer Z X-Series
 
4.8

(based on 44 reviews)

Ratings Distribution

  • 5 Stars

     

    (38)

  • 4 Stars

     

    (5)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Steering / controllability (40)
  • Cut quality (39)
  • Zero-turning radius (39)
  • Heavy duty construction (38)
  • Ease of maintenance (36)

Cons

  • Poor fuel efficiency (3)

Best Uses

  • Large lawns (2+ acres) (37)
  • Professional / commercial mowing (25)
  • Medium lawns (1-2 acres) (19)
  • Residential mowing (18)
  • Side discharge (17)
    • Engine Brand?:
    • Kawasaki (22), Kohler (12)
    • Deck Size?:
    • 60" (24)
    • Reviewer Profile:
    • Landscape professional (22), Homeowner (15), Acreage owner (14), Farmer (4), Grounds manager (4)
    • Personal or Professional Use?:
    • Personal (25), Professional (25)

Most Liked Positive Review

 

Nobody Does It Better

Hands down best mower on the market. This mower saves time and money. When it comes to fall clean-ups this mower is amazing with an Ultra Vac on it. I currently own 14...Read complete review

Hands down best mower on the market. This mower saves time and money. When it comes to fall clean-ups this mower is amazing with an Ultra Vac on it. I currently own 14 Exmark's and love everyone of them. Exmark is the only brand of mowers I will buy!

VS

Most Liked Negative Review

 

superior steering mower

I am on my second Exmark lazer z x series. I enjoy using the mower except in wet grass it clumps too much. I used to think this was the best zero turn rider...Read complete review

I am on my second Exmark lazer z x series. I enjoy using the mower except in wet grass it clumps too much. I used to think this was the best zero turn rider on the market until I tried a Scag tiger cat 2. The quality of cut in wet grass is far superior on the Scag. The drive system on the Exmark is better ,but my dealer charged 200.00 to change the filters and fluid. I am going back to Scag after 15 years of using Exmark. The anti-scalp wheels on this mower have been a problem for 15 years.

Reviewed by 44 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

Ex mark x series kawasaki carbed

By 

from Kentucky

About Me Landscape Professional

Verified Reviewer

Pros

  • Cut Quality
  • Ease of Maintenance
  • Engine Performance / Brand
  • Steering / Controllability
  • Zero-Turning Radius

Cons

    Best Uses

    • Professional / Commercial Mowing

    Comments about Exmark Lazer Z X-Series:

    Good running machine, starts evertime, big relief over the previous model with a Kohler efi

     
    5.0

    Best Machine on the Market

    By 

    from Minneapolis, MN

    About Me Landscape Professional

    Verified Buyer

    Pros

    • Availability & Performance of Accessories
    • Comfort & Ergonomics
    • Cut Quality
    • Ease of Maintenance
    • Ease of Use
    • Engine Performance / Brand
    • Heavy Duty Construction
    • Speed
    • Steering / Controllability
    • Zero-Turning Radius

    Cons

      Best Uses

      • Bagging
      • Large Lawns (2+ acres)
      • Medium Lawns (1-2 acres)
      • Professional / Commercial Mowing
      • Side Discharge
      • Small Lawns (Less than 1 acre)
      • Striping

      Comments about Exmark Lazer Z X-Series:

      Best mower made for for commercial lawn maintence.

      Service and delivery comments:

      Great dealer support from local dealers.

       
      5.0

      Excellent Heavyduty Lawnmower

      By 

      from Saybrook, Il

      About Me Farmer

      Verified Buyer

      Pros

      • Availability & Performance of Accessories
      • Comfort & Ergonomics
      • Cut Quality
      • Ease of Use
      • Heavy Duty Construction
      • Speed
      • Steering / Controllability
      • Styling / Appearance
      • Zero-Turning Radius

      Cons

        Best Uses

        • Large Lawns (2+ acres)
        • Medium Lawns (1-2 acres)
        • Side Discharge

        Comments about Exmark Lazer Z X-Series:

        Mow Lawns and Barnlots

         
        5.0

        It not just any mower

        By 

        from Belleville Il

        About Me Homeowner, Landscape Professional

        Verified Buyer

        Pros

        • Availability & Performance of Accessories
        • Comfort & Ergonomics
        • Cut Quality
        • Ease of Maintenance
        • Ease of Use
        • Engine Performance / Brand
        • Heavy Duty Construction
        • Speed
        • Steering / Controllability
        • Zero-Turning Radius

        Cons

          Best Uses

          • Bagging
          • Large Lawns (2+ acres)
          • Professional / Commercial Mowing
          • Striping

          Comments about Exmark Lazer Z X-Series:

          Overall excellent machines... been running for over 17 years now

           
          5.0

          Very user friendly and high commercial garde machine

          By 

          from Abbottstown PA

          About Me Landscape Professional

          Verified Buyer

          Pros

          • Availability & Performance of Accessories
          • Cut Quality
          • Engine Performance / Brand
          • Fuel Efficiency
          • Heavy Duty Construction
          • Steering / Controllability
          • Zero-Turning Radius

          Cons

            Best Uses

            • Large Lawns (2+ acres)

            Comments about Exmark Lazer Z X-Series:

            Good Machine, Sticks to the hills.

            (1 of 1 customers found this review helpful)

             
            5.0

            Excellent commercial mower

            By 

            from Hendersonville Tn

            About Me Landscape Professional

            Verified Buyer

            Pros

            • Availability & Performance of Accessories
            • Comfort & Ergonomics
            • Cut Quality
            • Ease of Maintenance
            • Ease of Use
            • Engine Performance / Brand
            • Fuel Efficiency
            • Heavy Duty Construction
            • Speed
            • Steering / Controllability
            • Styling / Appearance
            • Zero-Turning Radius

            Cons

              Best Uses

              • Bagging
              • Large Lawns (2+ acres)
              • Medium Lawns (1-2 acres)
              • Mulching
              • Professional / Commercial Mowing
              • Residential Mowing
              • Side Discharge
              • Small Lawns (Less than 1 acre)
              • Striping

              Comments about Exmark Lazer Z X-Series:

              Commercial and residential lawn service

               
              5.0

              What a Great Mower

              By 

              from United States

              About Me Landscape Professional

              Verified Buyer

              Pros

              • Availability & Performance of Accessories
              • Comfort & Ergonomics
              • Cut Quality
              • Ease of Maintenance
              • Ease of Use
              • Engine Performance / Brand
              • Fuel Efficiency
              • Heavy Duty Construction
              • Speed
              • Steering / Controllability
              • Styling / Appearance
              • Zero-Turning Radius

              Cons

                Best Uses

                • Large Lawns (2+ acres)
                • Medium Lawns (1-2 acres)
                • Professional / Commercial Mowing
                • Side Discharge
                • Small Lawns (Less than 1 acre)

                Comments about Exmark Lazer Z X-Series:

                This is the best zero turn on the market. I would not tell my completion about Exmark, only my friends.

                Service and delivery comments:

                Exmark dealer network is great. They support the product. If there is a problem it is fixed immediately. They always have parts on hand.

                 
                5.0

                Love this exmark!

                By 

                from Bossier la

                About Me Acreage Owner

                Verified Buyer

                Pros

                • Availability & Performance of Accessories
                • Comfort & Ergonomics
                • Cut Quality
                • Ease of Maintenance
                • Ease of Use
                • Engine Performance / Brand
                • Fuel Efficiency
                • Heavy Duty Construction
                • Speed
                • Steering / Controllability
                • Styling / Appearance
                • Zero-Turning Radius

                Cons

                  Best Uses

                  • Awsome
                  • Large Lawns (2+ acres)
                  • Medium Lawns (1-2 acres)
                  • Professional / Commercial Mowing
                  • Side Discharge
                  • Small Lawns (Less than 1 acre)

                  Comments about Exmark Lazer Z X-Series:

                  I love this mower. It's my 5 th exmark and they get better than the last. I got the floating platform because of back problems. Love it

                  Service and delivery comments:

                  All good

                   
                  5.0

                  Excellent Mower for full time commercial use

                  By 

                  from Dexter, MI

                  About Me Landscape Professional

                  Verified Buyer

                  Pros

                  • Comfort & Ergonomics
                  • Cut Quality
                  • Ease of Maintenance
                  • Engine Performance / Brand
                  • Heavy Duty Construction
                  • Speed
                  • Steering / Controllability

                  Cons

                    Best Uses

                    • Large Lawns (2+ acres)
                    • Medium Lawns (1-2 acres)
                    • Professional / Commercial Mowing
                    • Residential Mowing
                    • Side Discharge
                    • Small Lawns (Less than 1 acre)
                    • Striping

                    Comments about Exmark Lazer Z X-Series:

                    We love our Exmark mowers. The design is much simpler than other mower manufactures we have. As a result maintenance is much faster.

                    (3 of 3 customers found this review helpful)

                     
                    5.0

                    I would buy this mower again

                    By 

                    from Fort Collins, CO

                    About Me Field Mowing Contractor

                    Verified Buyer

                    Pros

                    • Comfort & Ergonomics
                    • Cut Quality
                    • Ease of Maintenance
                    • Ease of Use
                    • Engine Performance / Brand
                    • Fuel Efficiency
                    • Heavy Duty Construction
                    • Speed
                    • Steering / Controllability
                    • Styling / Appearance
                    • Zero-Turning Radius

                    Cons

                      Best Uses

                      • Field grass mowing
                      • Large Lawns (2+ acres)
                      • Side Discharge

                      Comments about Exmark Lazer Z X-Series:

                      We are a large field mowing contractor and use equipment in the roughest conditions. Rides great, mows great.

                      Displaying reviews 1-10

                      Back to top

                      Previous | Next »