Mouseover to Zoom

Lazer Z E-Series

The definition of value.
The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z, but in a value package. Features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines or a Kohler® Command™ EFI engine matched to a full-floating, UltraCut™ Series 4 cutting deck. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. Comes equipped with a full-suspension seat that enhances operator comfort.

Hydro Drive, Simplified

Unibody Frame

Less Time At The Pump

On-Board Diagnostics

Fewer Grease Points

Ultracut Series 4 Deck

Rear Discharge Deck

Tool-less Belt Removal

Model Specs


Specifications for model # LZE651GKA484A2

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 23 x 9.50-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX651V
Engine Displacement 726
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 175 ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 48"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded with 7-gauge side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 16.25" Length
Dimensions
Width 59.6 in. (151.4 cm)
Length 79.2 in. (201.2 cm)
Height 70 in. (177.8 cm)
Curb Weight 1055

Specifications for model # LZE740EKC60400

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Two tone bolstered seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 20-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV740
Engine Displacement 747
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (14.0 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1115

Specifications for model # LZE751CKA524A2

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 23 x 9.50-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 52"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 18.0" Length
Dimensions
Width 64.8 in. (164.6 cm)
Length 79.2 in. (201.2 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751CKA604A1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751GKA524A2

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 23 x 9.50-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 52"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 18.0" Length
Dimensions
Width 64.8 in. (164.6 cm)
Length 79.2 in. (201.2 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751GKA604A1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751GKA60RA1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 66.2 in. (168.1 cm)
Length 87.2 in. (221.5cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751GKA724A1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751GKA72RA1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 78.2 in. (198.6 cm)
Length 87.2 in. (221.5cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751GKA604C1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE730GKA524C2

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 23 x 9.50-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX730V
Engine Displacement 726
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 175 ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 52"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 18.0" Length
Dimensions
Width 64.8 in. (164.6 cm)
Length 79.2 in. (201.2 cm)
Height 70 in. (177.8 cm)
Curb Weight 1175

Accessories


Accessories for model # LZE651GKA484A2

KIT,HITCH

12 VOLT ADAPTER

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

KIT,TILT FRAME AND ISO MO

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

KIT, UV DRIVE 484 SPLINED 850,000 +

POWER DECK LIFT KIT

KIT-STRIPER VERT ADJUST 4

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT,JACK MOUNT

ULTRA VAC, DOUBLE BAG

ULTRA VAC SMALL (7 BUSHEL) DUMP FROM SEAT

KIT, TRASH HOLDER

KIT,MULCH 486

CATCHER-SIDE MOUNT

KIT,JACK

KIT, HYDRO SERVICE

MAT, FOOT PANEL NLZ

Accessories for model # LZE740EKC60400

KIT,HITCH

12 VOLT ADAPTER

KIT, HARNESS ADD ON ACCESSORY

KIT,SEATS CRSS

KIT,SUNSHADE

KIT,TILT FRAME AND ISO MO

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

KIT, UV DRIVE 604 SPLINED 850,000 +

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

KIT, NLZ 60 REAR ANTI SCALP

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 4

OCD, FOOT

ASM- AIR SUSPENSION SEAT

FULL SUSPENSION SEAT, TWO TONE

KIT,JACK MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT, TRASH HOLDER

KIT,MULCH 606

CATCHER-SIDE MOUNT

KIT,JACK

KIT, HYDRO SERVICE

Accessories for model # LZE751CKA524A2

KIT,HITCH

12 VOLT ADAPTER

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

KIT,TILT FRAME AND ISO MO

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

KIT, UV DRIVE 524 SPLINED 850,000 +

POWER DECK LIFT KIT

KIT-STRIPER VERT ADJUST 4

OCD, FOOT

ASM- AIR SUSPENSION SEAT

ULTRA VAC, DOUBLE BAG

ULTRA VAC SMALL (7 BUSHEL) DUMP FROM SEAT

KIT, TRASH HOLDER

KIT,MULCH 526

CATCHER-SIDE MOUNT

KIT,JACK

KIT,JACK MOUNT

KIT, HYDRO SERVICE

MAT, FOOT PANEL NLZ

Accessories for model # LZE751CKA604A1

KIT,HITCH

12 VOLT ADAPTER

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

KIT,TILT FRAME AND ISO MO

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

KIT, UV DRIVE 604 SPLINED 850,000 +

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

KIT, NLZ 60 REAR ANTI SCALP

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 4

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT,JACK MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT, TRASH HOLDER

KIT,MULCH 606

CATCHER-SIDE MOUNT

KIT,JACK

KIT, HYDRO SERVICE

Accessories for model # LZE751GKA524A2

KIT,HITCH

12 VOLT ADAPTER

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

KIT,TILT FRAME AND ISO MO

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

KIT, UV DRIVE 524 SPLINED 850,000 +

POWER DECK LIFT KIT

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 4

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT,JACK MOUNT

ULTRA VAC, DOUBLE BAG

ULTRA VAC SMALL (7 BUSHEL) DUMP FROM SEAT

KIT, TRASH HOLDER

KIT,MULCH 526

CATCHER-SIDE MOUNT

KIT,JACK

KIT, HYDRO SERVICE

Accessories for model # LZE751GKA604A1

KIT,HITCH

12 VOLT ADAPTER

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

KIT,TILT FRAME AND ISO MO

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

KIT, UV DRIVE 604 SPLINED 850,000 +

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

KIT, NLZ 60 REAR ANTI SCALP

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 4

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT,JACK MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT, TRASH HOLDER

KIT,MULCH 606

CATCHER-SIDE MOUNT

KIT,JACK

KIT, HYDRO SERVICE

Accessories for model # LZE751GKA60RA1

KIT,HITCH

12 VOLT ADAPTER

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

KIT,TILT FRAME AND ISO MO

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

MAT, FOOT PANEL NLZ

KIT-FINISH CUT RD60

ASM- AIR SUSPENSION SEAT

SKID-BUMPER, DECK

KIT-RD ANTISCALP AND WEAR

KIT, TRASH HOLDER

KIT,JACK

KIT, HYDRO SERVICE

KIT,JACK MOUNT

Accessories for model # LZE751GKA724A1

KIT,HITCH

12 VOLT ADAPTER

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

KIT,TILT FRAME AND ISO MO

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

KIT, UV DRIVE 724 SPLINED 920,000 +

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

MAT, FOOT PANEL NLZ

KIT-STRIPER VERT ADJUST 7

OCD, FOOT

ASM- AIR SUSPENSION SEAT

KIT,JACK MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT,MULCH 726

KIT, TRASH HOLDER

KIT,JACK

KIT, HYDRO SERVICE

Accessories for model # LZE751GKA72RA1

KIT,HITCH

12 VOLT ADAPTER

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

KIT,TILT FRAME AND ISO MO

EXTENDED DRIVE LEVER KIT

KIT,FRPS LIGHT

POWER DECK LIFT KIT

HYDRO MAINTENANCE KIT

MAT, FOOT PANEL NLZ

KIT-FINISH CUT RD72

ASM- AIR SUSPENSION SEAT

SKID-BUMPER, DECK

KIT-RD ANTISCALP AND WEAR

KIT, TRASH HOLDER

KIT,JACK

KIT, HYDRO SERVICE

KIT,JACK MOUNT

Accessories for model # LZE751GKA604C1

KIT,HITCH

12 VOLT ADAPTER

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

KIT, UV DRIVE 604 SPLINED 850,000 +

KIT, NLZ 60 REAR ANTI SCALP

KIT-STRIPER VERT ADJUST 4

KIT, HYDRO SERVICE

KIT,JACK MOUNT

KIT,JACK

CATCHER-SIDE MOUNT

ULTRA VAC TRIPLE BAG

ULTRA VAC BIG (11 BUSHEL) DUMP FROM SEAT

KIT,MULCH 606

KIT, TRASH HOLDER

KIT-MOUNTING WEIGHT

Accessories for model # LZE730GKA524C2

KIT,HITCH

12 VOLT ADAPTER

KIT, HARNESS ADD ON ACCESSORY

KIT,SUNSHADE

KIT,FRPS LIGHT

COVER, EXMARK LARGE RIDER

KIT, UV DRIVE 524 SPLINED 850,000 +

KIT-STRIPER VERT ADJUST 4

KIT, HYDRO SERVICE

KIT,JACK MOUNT

KIT,JACK

CATCHER-SIDE MOUNT

ULTRA VAC, DOUBLE BAG

ULTRA VAC SMALL (7 BUSHEL) DUMP FROM SEAT

KIT,MULCH 526

KIT, TRASH HOLDER

KIT-MOUNTING WEIGHT

Warranty


Lazer Z 5 Year Limited Warranty

We have you covered. We take great pride in the quality of our products and stand behind every single one. You can view, download, or print the warranty statement for your equipment here. 

Five year Lazer Z warranty is effective for Lazer Z products purchased August 1, 2016 or later. Refer to your owner's manual for the statement of warranty coverage for units purchased before this date.

Reviews


REVIEW SNAPSHOT®

by PowerReviews
ExmarkLazer Z E-Series
 
4.5

(based on 85 reviews)

Ratings Distribution

  • 5 Stars

     

    (61)

  • 4 Stars

     

    (15)

  • 3 Stars

     

    (4)

  • 2 Stars

     

    (2)

  • 1 Stars

     

    (3)

92%

of respondents would recommend this to a friend.

Pros

  • Cut quality (71)
  • Comfort & ergonomics (69)
  • Heavy duty construction (67)
  • Ease of use (66)
  • Steering / controllability (66)

Cons

  • Poor fuel efficiency (9)
  • Difficult maintenance (5)
  • Poor cut quality (5)
  • Poor quality (5)
  • Poor steering / controllability (4)

Best Uses

  • Large lawns (2+ acres) (60)
  • Residential mowing (44)
  • Medium lawns (1-2 acres) (38)
  • Professional / commercial mowing (38)
  • Side discharge (35)
    • Engine Brand?:
    • Kawasaki (33), Kohler (31), Exmark (5)
    • Deck Size?:
    • 60" (31), 52" (18), 48" (3)
    • Reviewer Profile:
    • Homeowner (45), Landscape professional (33), Acreage owner (29), Farmer (6), Grounds manager (5)
    • Personal or Professional Use?:
    • Personal (55), Professional (36)

Most Liked Positive Review

 

Awesome Machine!

We mow approximately 3 acres of our own property and several acres for family members. We added the extra seat suspension for comfort. The ride is incredible and mowing quality is of the highest...Read complete review

We mow approximately 3 acres of our own property and several acres for family members. We added the extra seat suspension for comfort. The ride is incredible and mowing quality is of the highest quality.

VS

Most Liked Negative Review

 

The jury is still out . . .

Well, the cut quality is the most dissappointing ascpect of this mower. I've had it to the shop for this. They increased the rake 1/4 inch and said it was perfect. ...Read complete review

Well, the cut quality is the most dissappointing ascpect of this mower. I've had it to the shop for this. They increased the rake 1/4 inch and said it was perfect. Not. This mower leaves random uncut blades. Very frustrating. I am a pro and have cut with scags, hustlers and toros. I know a well cut lawn.

I bought it late last season, so I only have 50 or so hours on it. I'm going to run it this season and work with it. If it continues to cut poorly, I'm going to trade it.

The upgraded (top of line seat, included in the E ss package) is great! Top of the line comfort for sure.

Reviewed by 85 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

Very pleased

By 

from Thornville ohio

About Me Homeowner

Verified Buyer

Pros

  • Comfort & Ergonomics
  • Ease of Maintenance
  • Engine Performance / Brand
  • Heavy Duty Construction
  • Steering / Controllability
  • Styling / Appearance
  • Zero-Turning Radius

Cons

    Best Uses

    • Large Lawns (2+ acres)

    Comments about Exmark Lazer Z E-Series:

    Still haven't had the chance to mow with it yet but it starts every time even in the cold weather. Very comfortable seat and controls, like the ease of maintenance. I've owned 3 other exmarks and have always loved this brand. Very happy with this purchase and can't wait to mow my new property that's 4 acres that I just purchased

    Service and delivery comments:

    Dealer and delivery was great

     
    5.0

    What a great machine and sales person!

    By 

    from Walcott , Iowa

    About Me Farmer

    Verified Buyer

    Pros

    • Availability & Performance of Accessories
    • Comfort & Ergonomics
    • Cut Quality
    • Ease of Maintenance
    • Ease of Use
    • Engine Performance / Brand
    • Fuel Efficiency
    • Heavy Duty Construction
    • Speed
    • Steering / Controllability
    • Styling / Appearance
    • Zero-Turning Radius

    Cons

      Best Uses

      • Medium Lawns (1-2 acres)
      • Residential Mowing

      Comments about Exmark Lazer Z E-Series:

      Why did I wait? Saves about 40 minutes of mowing time. used to have JohnDeere X720 with 54" deck. Even if grass is a little long when mowing , I don't have clumps of cut grass.

      Service and delivery comments:

      I'm very pleased with sales and service I have received.

       
      4.0

      The experience with my local dealer was great.

      By 

      from Greencastle, IN

      About Me Farmer, Homeowner

      Verified Buyer

      Pros

      • Availability & Performance of Accessories
      • Comfort & Ergonomics
      • Cut Quality
      • Ease of Maintenance
      • Ease of Use
      • Engine Performance / Brand
      • Heavy Duty Construction
      • Steering / Controllability
      • Styling / Appearance

      Cons

        Best Uses

        • Large Lawns (2+ acres)
        • Medium Lawns (1-2 acres)
        • Mulching
        • Professional / Commercial Mowing
        • Residential Mowing

        Comments about Exmark Lazer Z E-Series:

        As being a former Dixie Chopper owner I'm looking forward to using this machine this summer as it looks to be a more sturdier machine. The deck looks to be heavier and the overall design looks to be better.

        Service and delivery comments:

        The knowledge and expertise of my local dealer was excellent. They were very informative and really helped me out in making a decision.

        (0 of 1 customers found this review helpful)

         
        3.0

        Good base mower with awesome cut

        By 

        from Mooresville nc

        About Me Landscape Professional

        Verified Buyer

        Pros

        • Cut Quality
        • Ease of Use
        • Engine Performance / Brand
        • Fuel Efficiency
        • Speed
        • Zero-Turning Radius

        Cons

        • Difficult Maintenance
        • Poor Steering / Controllability

        Best Uses

        • Bagging
        • Large Lawns (2+ acres)
        • Medium Lawns (1-2 acres)
        • Professional / Commercial Mowing
        • Residential Mowing
        • Side Discharge
        • Striping

        Comments about Exmark Lazer Z E-Series:

        E series and all series should have the wider flat free tires. Smaller tires in front can have impact on lawn damage and traction. If you upgrade they put you in a much higher cost

         
        5.0

        I've used Exmark in the past and will continue in the future

        By 

        from Cape Canaveral, Florida

        About Me Landscape Professional

        Verified Buyer

        Pros

        • Availability & Performance of Accessories
        • Comfort & Ergonomics
        • Cut Quality
        • Ease of Maintenance
        • Ease of Use
        • Engine Performance / Brand
        • Fuel Efficiency
        • Heavy Duty Construction
        • Seat is comfortable
        • Speed
        • Steering / Controllability
        • Styling / Appearance
        • Zero-Turning Radius

        Cons

          Best Uses

          • Large Lawns (2+ acres)
          • Mulching
          • Professional / Commercial Mowing

          Comments about Exmark Lazer Z E-Series:

          Used for large commercial mowing. High Quality cutting machine.

          Service and delivery comments:

          Excellent service

           
          5.0

          Emark Lazer Z 60"

          By 

          from Austin Texas

          About Me Acreage Owner

          Verified Buyer

          Pros

          • Comfort & Ergonomics
          • Cut Quality
          • Ease of Use
          • Engine Performance / Brand
          • Heavy Duty Construction
          • Speed
          • Steering / Controllability
          • Styling / Appearance
          • Zero-Turning Radius

          Cons

            Best Uses

            • Large Lawns (2+ acres)

            Comments about Exmark Lazer Z E-Series:

            Love the new mower though I have only used it twice so far.

             
            5.0

            Great mower

            By 

            from Cloverdale In

            About Me Landscape Professional

            Verified Buyer

            Pros

            • Comfort & Ergonomics
            • Cut Quality
            • Ease of Maintenance
            • Speed
            • Steering / Controllability

            Cons

              Best Uses

              • Large Lawns (2+ acres)
              • Professional / Commercial Mowing
              • Side Discharge
              • Striping

              Comments about Exmark Lazer Z E-Series:

              I use this mower in a small scale landscaping and mowing business currently have 20 yards

              Service and delivery comments:

              Very fast service ordered with a striping kit and OCD chute had mower ready for pick up in less than 3 hours

              (0 of 1 customers found this review helpful)

               
              5.0

              Top of the line. No other brand comes close.

              By 

              from St. Louis

              About Me Acreage Owner

              Verified Buyer

              Pros

              • Comfort & Ergonomics
              • Cut Quality
              • Heavy Duty Construction
              • Zero-Turning Radius

              Cons

                Best Uses

                • Large Lawns (2+ acres)

                Comments about Exmark Lazer Z E-Series:

                Great product. Great price.

                Service and delivery comments:

                Delivered on time.

                 
                5.0

                Love it!!!

                By 

                from Omaha

                About Me Acreage Owner, Farmer, Homeowner

                Verified Reviewer

                Pros

                • Availability & Performance of Accessories
                • Comfort & Ergonomics
                • Cut Quality
                • Ease of Maintenance
                • Ease of Use
                • Engine Performance / Brand
                • Fuel Efficiency
                • Heavy Duty Construction
                • Speed
                • Steering / Controllability
                • Styling / Appearance
                • Zero-Turning Radius

                Cons

                  Best Uses

                  • Large Lawns (2+ acres)
                  • Mulching
                  • Residential Mowing
                  • Side Discharge
                  • Striping

                  Comments about Exmark Lazer Z E-Series:

                  Made in America!

                  (1 of 1 customers found this review helpful)

                   
                  5.0

                  Thought I would never leave my Dixie Chopper!

                  By 

                  from Greencastle, IN

                  About Me Homeowner

                  Verified Buyer

                  Pros

                  • Comfort & Ergonomics
                  • Cut Quality
                  • Ease of Use
                  • Engine Performance / Brand
                  • Heavy Duty Construction
                  • Speed
                  • Steering / Controllability
                  • Styling / Appearance
                  • Zero-Turning Radius

                  Cons

                    Best Uses

                    • Large Lawns (2+ acres)
                    • Residential Mowing

                    Comments about Exmark Lazer Z E-Series:

                    Smooth and powerful operation with exceptional even cut. Stability on hills and comfortable ride with adjustable cushion ride seat.

                    Service and delivery comments:

                    Delivery was prompt and as expected. Dealer provided good instructions and had exceptional knowledge of product.

                    Displaying reviews 1-10

                    Back to top

                    Previous | Next »