Mouseover to Zoom

Lazer Z E-Series

The definition of value.
The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z zero turn mower, but in a value package. Features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines or a Kohler® Command™ EFI engine matched to a full-floating, UltraCut™ Series 4 cutting deck, in 48, 52, 60 or 72 inch widths. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. Comes equipped with a full-suspension seat that enhances operator comfort.

Features


Exmark Product Thumbnail

Hydro Drive, Simplified

Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.

Exmark Product Thumbnail

Unibody Frame

Our one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”

Exmark Product Thumbnail

Less Time At The Pump

Gas-powered E-Series models have a single 8-gallon tank with one fill location.

Exmark Product Thumbnail

On-Board Diagnostics

Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

Exmark Product Thumbnail

Fewer Grease Points

With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

Exmark Product Thumbnail

Ultracut Series 4 Deck

This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Exmark Product Thumbnail

Rear Discharge Deck

Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.

Exmark Product Thumbnail

Tool-less Belt Removal

Deck and hydro belt can be installed without using any tools.

Model Specs


Specifications for model # LZE651GKA484A2

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 23 x 9.50-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX651V
Engine Displacement 726
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 175 ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 48"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded with 7-gauge side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 16.25" Length
Dimensions
Width 59.6 in. (151.4 cm)
Length 79.2 in. (201.2 cm)
Height 70 in. (177.8 cm)
Curb Weight 1055

Specifications for model # LZE740EKC60400

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Two tone bolstered seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 20-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ECV740
Engine Displacement 747
Engine Series Command™ EFI
Engine Type Electronic Fuel Injected
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas EFI
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (14.0 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1115

Specifications for model # LZE742GKC604A3

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model CV742
Engine Displacement 747
Engine Series Command™
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)
Curb Weight 1147

Specifications for model # LZE751CKA524A2

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 23 x 9.50-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 52"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 18.0" Length
Dimensions
Width 64.8 in. (164.6 cm)
Length 79.2 in. (201.2 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751CKA604A1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751GKA524A2

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 23 x 9.50-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 52"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 18.0" Length
Dimensions
Width 64.8 in. (164.6 cm)
Length 79.2 in. (201.2 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751GKA604A1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751GKA60RA1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 66.2 in. (168.1 cm)
Length 87.2 in. (221.5cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751GKA724A1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751GKA72RA1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 24.50" Length
Dimensions
Width 78.2 in. (198.6 cm)
Length 87.2 in. (221.5cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE751GKA604C1

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX751V
Engine Displacement 852
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Dimensions
Width 72.8 in. (184.9 cm)
Length 83.1 in. (211.1 cm)
Height 70 in. (177.8 cm)

Specifications for model # LZE730GKA524C2

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 23 x 9.50-12, 4 ply Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX730V
Engine Displacement 726
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop Electromagnetic 175 ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Decks
Width / Cutting Deck 52"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 18.0" Length
Dimensions
Width 64.8 in. (164.6 cm)
Length 79.2 in. (201.2 cm)
Height 70 in. (177.8 cm)
Curb Weight 1175

Accessories


Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

12-Volt Power Adapter

Part# 109-9694

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Seat Isolation System

Part# 116-0941

Reduces operator fatigue with a 3-dimensional, motion-isolated layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits Lazer E-Series models.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 116-2084

KIT, UV DRIVE 484 SPLINED 850,000 +

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

UltraVac 2-Bag Collection System

Part# LZUV2B

Switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD7

The UltraVac X Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 7 bushel capacity.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK486

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

12-Volt Power Adapter

Part# 109-9694

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Custom Ride Seat Suspension System

Part# 116-0062

A great value in comparison to more expensive full-suspension seats, our CustomRide suspension system easily mounts to your existing EVC operator seat. System features enable operator to customize suspension settings to their individual weight and personal preference. Fits Lazer Z models.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Seat Isolation System

Part# 116-0941

Reduces operator fatigue with a 3-dimensional, motion-isolated layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits Lazer E-Series models.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 116-2086

KIT, UV DRIVE 604 SPLINED 850,000 +

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Hydro Maintenance Kit

Part# 116-3270

Replaced by 126-8103

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Thumbnail

Full Suspension Seat

Part# 116-8912

This low-profile, full- suspension seat enhances operator comfort and lumbar support by adjusting to individual weight.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Seat Isolation System

Part# 116-0941

Reduces operator fatigue with a 3-dimensional, motion-isolated layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits Lazer E-Series models.

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Product Thumbnail

12-Volt Power Adapter

Part# 109-9694

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 126-8077

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 116-2086

KIT, UV DRIVE 604 SPLINED 850,000 +

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

12-Volt Power Adapter

Part# 109-9694

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Seat Isolation System

Part# 116-0941

Reduces operator fatigue with a 3-dimensional, motion-isolated layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits Lazer E-Series models.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 116-2085

KIT, UV DRIVE 524 SPLINED 850,000 +

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Thumbnail

UltraVac 2-Bag Collection System

Part# LZUV2B

Switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD7

The UltraVac X Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 7 bushel capacity.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK526

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

12-Volt Power Adapter

Part# 109-9694

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Seat Isolation System

Part# 116-0941

Reduces operator fatigue with a 3-dimensional, motion-isolated layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits Lazer E-Series models.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 116-2086

KIT, UV DRIVE 604 SPLINED 850,000 +

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Hydro Maintenance Kit

Part# 116-3270

Replaced by 126-8103

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

12-Volt Power Adapter

Part# 109-9694

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Seat Isolation System

Part# 116-0941

Reduces operator fatigue with a 3-dimensional, motion-isolated layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits Lazer E-Series models.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 116-2085

KIT, UV DRIVE 524 SPLINED 850,000 +

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

UltraVac 2-Bag Collection System

Part# LZUV2B

Switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD7

The UltraVac X Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 7 bushel capacity.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK526

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

12-Volt Power Adapter

Part# 109-9694

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Seat Isolation System

Part# 116-0941

Reduces operator fatigue with a 3-dimensional, motion-isolated layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits Lazer E-Series models.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 116-2086

KIT, UV DRIVE 604 SPLINED 850,000 +

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Hydro Maintenance Kit

Part# 116-3270

Replaced by 126-8103

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

12-Volt Power Adapter

Part# 109-9694

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Seat Isolation System

Part# 116-0941

Reduces operator fatigue with a 3-dimensional, motion-isolated layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits Lazer E-Series models.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Hydro Maintenance Kit

Part# 116-3270

Replaced by 126-8103

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Models: Parts Only

Finish Cut Baffles

Part# 116-8547

Maximize cut quality in the toughest conditions with this finish cut baffle kit.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Models: Parts Only

White Non-Marking Side Bumper

Part# 126-0854

Perfect for restricted and sensitive mowing areas, these durable bumpers eliminate the marking left behind by incidental contact.

Exmark Product Thumbnail

Anti-Scalp and Side Wear Bar Kit

Part# 127-6650

Protect your rear discharge cutting deck from impact, and your turf from tearing. This kit gives you peace of mind when mowing in tight spaces. The tapered anti-scalp roller help to prevent turf gouging in sharp turns.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

12-Volt Power Adapter

Part# 109-9694

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Seat Isolation System

Part# 116-0941

Reduces operator fatigue with a 3-dimensional, motion-isolated layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits Lazer E-Series models.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 116-2087

KIT, UV DRIVE 724 SPLINED 920,000 +

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Hydro Maintenance Kit

Part# 116-3270

Replaced by 126-8103

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6656

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Thumbnail

Operator Controlled Discharge (Foot)

Part# 116-8431

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK726

The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

12-Volt Power Adapter

Part# 109-9694

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Seat Isolation System

Part# 116-0941

Reduces operator fatigue with a 3-dimensional, motion-isolated layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits Lazer E-Series models.

Exmark Product Models: Parts Only

Extended Drive Lever Kit

Part# 116-1065

Improve your elbow room while you operate with extended drive levers.

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Power Deck Lift

Part# 116-2517

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

Exmark Product Thumbnail

Hydro Maintenance Kit

Part# 116-3270

Replaced by 126-8103

Exmark Product Thumbnail

Floor Mat

Part# 116-6068

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

Exmark Product Models: Parts Only

Finish Cut Baffles

Part# 116-8548

Maximize cut quality in the toughest conditions with this finish cut baffle kit.

Exmark Product Thumbnail

Air Ride Suspension Seat

Part# 116-8820

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Exmark Product Models: Parts Only

White Non-Marking Side Bumper

Part# 126-0854

Perfect for restricted and sensitive mowing areas, these durable bumpers eliminate the marking left behind by incidental contact.

Exmark Product Thumbnail

Anti-Scalp and Side Wear Bar Kit

Part# 127-6650

Protect your rear discharge cutting deck from impact, and your turf from tearing. This kit gives you peace of mind when mowing in tight spaces. The tapered anti-scalp roller help to prevent turf gouging in sharp turns.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

12-Volt Power Adapter

Part# 109-9694

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 116-2086

KIT, UV DRIVE 604 SPLINED 850,000 +

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

UltraVac 3-Bag Collection System

Part# LZUV3B

The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD11

The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Models: Parts Only

Suspension Platform Weight Adapter Kit

Part# 132-5092

Used with the UV completing kit, creates correct spacing to accommodate the UV weights with suspension platform

Exmark Product Thumbnail

Hitch Kit

Part# 109-9487

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

Exmark Product Thumbnail

12-Volt Power Adapter

Part# 109-9694

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

Exmark Product Models: Parts Only

Harness Add-On Accessory Kit

Part# 109-9798

Take the hassle out of dual accessory fit up with this add-on harness.

Exmark Product Thumbnail

Sun Shade (ROPS)

Part# 116-0513

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.)

Exmark Product Thumbnail

Light Kit

Part# 116-1154

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Models: Parts Only

UltraVac Completing Kit

Part# 116-2085

KIT, UV DRIVE 524 SPLINED 850,000 +

Exmark Product Thumbnail

Turf Striping Kit

Part# 116-6655

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Exmark Product Models: Parts Only

Hydro Maintenance Kit

Part# 126-8103

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

Exmark Product Thumbnail

Jack Mount Receiver

Part# 127-6665

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

UltraVac 2-Bag Collection System

Part# LZUV2B

Switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Exmark Product Thumbnail

UltraVac Quick Dump Collection System

Part# LZUVQD7

The UltraVac X Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 7 bushel capacity.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK526

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

Trash Container

Part# TC26

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Models: Parts Only

Suspension Platform Weight Adapter Kit

Part# 132-5092

Used with the UV completing kit, creates correct spacing to accommodate the UV weights with suspension platform

Warranty


Lazer Z 5 Year Limited Warranty

We have you covered. We take great pride in the quality of our products and stand behind every single one. You can view, download, or print the warranty statement for your equipment here.�

Five year Lazer Z warranty is effective for Lazer Z products purchased August 1, 2016 or later. Refer to your owner's manual for the statement of warranty coverage for units purchased before this date.

Reviews


REVIEW SNAPSHOT®

by PowerReviews
ExmarkLazer Z E-Series
 
4.7

(based on 135 reviews)

Ratings Distribution

  • 5 Stars

     

    (106)

  • 4 Stars

     

    (20)

  • 3 Stars

     

    (4)

  • 2 Stars

     

    (2)

  • 1 Stars

     

    (3)

95%

of respondents would recommend this to a friend.

Pros

  • Cut quality (119)
  • Comfort & ergonomics (111)
  • Ease of use (109)
  • Heavy duty construction (109)
  • Steering / controllability (108)

Cons

  • Poor fuel efficiency (17)
  • Difficult maintenance (6)
  • Lack of speed (6)
  • Poor steering / controllability (6)
  • Poor cut quality (5)

Best Uses

  • Large lawns (2+ acres) (102)
  • Residential mowing (62)
  • Professional / commercial mowing (59)
  • Medium lawns (1-2 acres) (58)
  • Side discharge (57)
    • Engine Brand?:
    • Kawasaki (65), Kohler (45), Exmark (8)
    • Deck Size?:
    • 60" (68), 52" (28), 48" (4)
    • Reviewer Profile:
    • Homeowner (72), Landscape professional (48), Acreage owner (46), Farmer (11), Grounds manager (9)
    • Personal or Professional Use?:
    • Personal (89), Professional (58)

Most Liked Positive Review

 

Awesome Machine!

We mow approximately 3 acres of our own property and several acres for family members. We added the extra seat suspension for comfort. The ride is incredible and mowing quality is of the highest...Read complete review

We mow approximately 3 acres of our own property and several acres for family members. We added the extra seat suspension for comfort. The ride is incredible and mowing quality is of the highest quality.

VS

Most Liked Negative Review

 

The jury is still out . . .

Well, the cut quality is the most dissappointing ascpect of this mower. I've had it to the shop for this. They increased the rake 1/4 inch and said it was perfect. ...Read complete review

Well, the cut quality is the most dissappointing ascpect of this mower. I've had it to the shop for this. They increased the rake 1/4 inch and said it was perfect. Not. This mower leaves random uncut blades. Very frustrating. I am a pro and have cut with scags, hustlers and toros. I know a well cut lawn.

I bought it late last season, so I only have 50 or so hours on it. I'm going to run it this season and work with it. If it continues to cut poorly, I'm going to trade it.

The upgraded (top of line seat, included in the E ss package) is great! Top of the line comfort for sure.

Reviewed by 135 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

Great mower

By 

from Sumter sc

About Me Landscape Professional

Verified Buyer

Pros

  • Availability & Performance of Accessories
  • Comfort & Ergonomics
  • Cut Quality
  • Ease of Maintenance
  • Ease of Use
  • Engine Performance / Brand
  • Fuel Efficiency
  • Heavy Duty Construction
  • Speed
  • Steering / Controllability
  • Styling / Appearance
  • Zero-Turning Radius

Cons

    Best Uses

    • Large Lawns (2+ acres)
    • Mulching
    • Professional / Commercial Mowing
    • Striping

    Comments about Exmark Lazer Z E-Series:

    Very dependable!

     
    4.0

    Excellent Mowing Machine

    By 

    from Fort Scott Kansas

    About Me Homeowner, Landscape Professional

    Verified Buyer

    Pros

    • Availability & Performance of Accessories
    • Comfort & Ergonomics
    • Cut Quality
    • Ease of Maintenance
    • Engine Performance / Brand
    • Heavy Duty Construction
    • Speed
    • Styling / Appearance
    • Zero-Turning Radius

    Cons

    • Poor Fuel Efficiency
    • Poor Steering / Controllability

    Best Uses

    • Large Lawns (2+ acres)
    • Professional / Commercial Mowing
    • Residential Mowing
    • Side Discharge

    Comments about Exmark Lazer Z E-Series:

    Mow both Commercial and Residential. Only a couple things I dislike about the mower. Would prefer dual gas tanks. Discharge chute gets caught when lifting the deck. Tires spon when making your turn around.

     
    5.0

    Best Mower on the market.

    By 

    from Nashville, IL

    Verified Buyer

    Pros

    • Comfort & Ergonomics
    • Cut Quality
    • Ease of Maintenance
    • Ease of Use
    • Engine Performance / Brand
    • Heavy Duty Construction
    • Steering / Controllability
    • Styling / Appearance
    • Zero-Turning Radius

    Cons

      Best Uses

      • Large Lawns (2+ acres)
      • Medium Lawns (1-2 acres)
      • Professional / Commercial Mowing
      • Residential Mowing
      • Side Discharge
      • Small Lawns (Less than 1 acre)

      Comments about Exmark Lazer Z E-Series:

      We mow 2 cemeteries and multiple lots. This mower outranks others I've tried by leaps and bounds. From quality of cut to ease of maintaining.

      Service and delivery comments:

      Yes

       
      5.0

      Yes

      By 

      from Belle Chasse La

      About Me Landscape Professional

      Verified Buyer

      Pros

      • Availability & Performance of Accessories
      • Comfort & Ergonomics
      • Cut Quality
      • Ease of Maintenance
      • Ease of Use
      • Engine Performance / Brand
      • Fuel Efficiency
      • Heavy Duty Construction
      • Speed
      • Steering / Controllability
      • Styling / Appearance
      • Zero-Turning Radius

      Cons

        Best Uses

        • Large Lawns (2+ acres)
        • Professional / Commercial Mowing
        • Side Discharge

        Comments about Exmark Lazer Z E-Series:

        Love it ....

         
        5.0

        Solid machine with simplicity to run and maintain

        By 

        from NW Iowa

        About Me Acreage Owner, Farmer

        Verified Buyer

        Pros

        • Availability & Performance of Accessories
        • Comfort & Ergonomics
        • Ease of Maintenance
        • Ease of Use
        • Heavy Duty Construction
        • Speed
        • Steering / Controllability

        Cons

          Best Uses

          • Bagging
          • Large Lawns (2+ acres)
          • Residential Mowing
          • Side Discharge

          Comments about Exmark Lazer Z E-Series:

          Smooth ride with suspension package. Built to last years of use. High capacity deck for mowing agricultural areas that get attention twice a year. Simple maintenance, grease, oil filter placement, and hose to drain oil. Bagger attachment (3 bag) is heavy duty and simple to change own to side discharge. Large tire aids in smooth ride but can tear up yard if turning too sharp or fast.

           
          5.0

          Super Mower for years to come!

          By 

          from Fenton MI

          About Me Acreage Owner, Homeowner

          Verified Buyer

          Pros

          • Comfort & Ergonomics
          • Cut Quality
          • Ease of Maintenance
          • Engine Performance / Brand
          • Heavy Duty Construction
          • Speed
          • Steering / Controllability
          • Styling / Appearance
          • Zero-Turning Radius

          Cons

          • Poor Fuel Efficiency

          Best Uses

          • Large Lawns (2+ acres)
          • Residential Mowing
          • Side Discharge

          Comments about Exmark Lazer Z E-Series:

          This mower is built to last. Well-made has a great engine with enough horsepower. Looking forward to owning it for many years.

          Service and delivery comments:

          Delivery was within a couple days and have not had it in for any service yet

           
          5.0

          Excellent machine! Well worth the money

          By 

          from Tahlequah, Ok

          About Me Landscape Professional

          Verified Buyer

          Pros

          • Availability & Performance of Accessories
          • Comfort & Ergonomics
          • Cut Quality
          • Ease of Maintenance
          • Ease of Use
          • Engine Performance / Brand
          • Heavy Duty Construction
          • Speed
          • Steering / Controllability
          • Styling / Appearance
          • Zero-Turning Radius

          Cons

          • Poor Fuel Efficiency

          Best Uses

          • Medium Lawns (1-2 acres)
          • Mulching
          • Professional / Commercial Mowing
          • Side Discharge

          Comments about Exmark Lazer Z E-Series:

          Use it everyday, wouldn't recommend anything else

           
          5.0

          Great product!

          By 

          from Pace, FL

          About Me Landscape Professional

          Verified Buyer

          Pros

          • Availability & Performance of Accessories
          • Comfort & Ergonomics
          • Cut Quality
          • Ease of Maintenance
          • Ease of Use
          • Engine Performance / Brand
          • Heavy Duty Construction
          • Speed
          • Steering / Controllability
          • Styling / Appearance
          • Zero-Turning Radius

          Cons

            Best Uses

            • Large Lawns (2+ acres)
            • Medium Lawns (1-2 acres)
            • Professional / Commercial Mowing
            • Side Discharge
            • Small Lawns (Less than 1 acre)

            Comments about Exmark Lazer Z E-Series:

            The mower is a beast and cuts like a champ! Works well in small yards as well as the big properties.

            Service and delivery comments:

            The mower was better than expected.

             
            5.0

            Good quailty mower

            By 

            from Elmdale

            About Me Homeowner

            Verified Buyer

            Pros

            • Comfort & Ergonomics
            • Cut Quality
            • Ease of Use
            • Engine Performance / Brand
            • Heavy Duty Construction
            • Zero-Turning Radius

            Cons

            • Poor Steering / Controllability

            Best Uses

            • Large Lawns (2+ acres)

            Comments about Exmark Lazer Z E-Series:

            This is my second eX mark, they are well made mowers that last a long time. They are simple with not too many electrical extras that cause problems as the mower gets some age on it. I love the seat it is very comfortable. The only thing I do not like about this one is at full speed it will not go straight.

             
            5.0

            I would buy this product again and again

            By 

            from Demotte Indiana

            About Me Grounds Manager, Landscape Professional

            Pros

            • Availability & Performance of Accessories
            • Comfort & Ergonomics
            • Cut Quality
            • Ease of Maintenance
            • Ease of Use
            • Engine Performance / Brand
            • Fuel Efficiency
            • Heavy Duty Construction
            • Speed
            • Steering / Controllability
            • Styling / Appearance
            • Zero-Turning Radius

            Cons

              Best Uses

              • Bagging
              • Large Lawns (2+ acres)
              • Medium Lawns (1-2 acres)
              • Mulching
              • Professional / Commercial Mowing
              • Side Discharge
              • Small Lawns (Less than 1 acre)
              • Striping

              Comments about Exmark Lazer Z E-Series:

              I use my lazer z e everyday. It outperforms other products. This machine keeps up with me and the work that I throw at it. The cut quality on this machine is immaculate. Its a tough, durable, and dependable commercial machicne. I always recommend Exmark to all my friends and fellow landscapers

              Displaying reviews 1-10

              Back to top

              Previous | Next »