Mouseover to Zoom

Vantage S-Series Propane

Do more with an eco-friendly, propane stand-on mower.
The environmentally friendly Exmark Vantage stand-on mower delivers a progressive, operator-focused design, superior maneuverability and legendary durability. Features a 52-inch UltraCut Series 4 full-floating deck and a large, rubber padded platform with weight-compensating suspension for maximum control and maneuverability.

Available Models

Features


Exmark Product Thumbnail

Unique "Vapor Draw" Design

The propane tanks are of a unique "vapor draw" design that includes a special baffle system to prevent liquid propane ingestion into the supply line, which can cause damage to fuel system components and render the unit inoperative.

Exmark Product Thumbnail

Lower Operating Costs

Typically, fuel costs for propane will be less than gasoline, which results in lower operating costs.

Exmark Product Thumbnail

Green Alternative Fuel

Propane is considered a Green Alternative Fuel and when burned, it produces less GHG (green house gas) yielding a reduced carbon footprint as compared to gasoline. PERC (Propane Education & Research Council) reports that GHG reductions typically range in the 20% to 25% range.

Exmark Product Thumbnail

No Hour Restrictions

No known restrictions regarding hours of operation on "Ozone Action Days."

Exmark Product Thumbnail

Cleaner Burning Fuel

Propane is a cleaner burning fuel and has fewer combustion by-products as compared to gasoline. Engine oil will contain less contaminates for the equivalent hours of operation.

Exmark Product Thumbnail

Fuel Stability

No deterioration or breakdown of fuel over time creating "varnish deposits" as gasoline does. No need for fuel stabilizers during long periods of storage.

Model Specs


Specifications for model # VTS740PKC52400

Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Twin levers with no-tools adjustable front reference bar to modify forward ground speed.
Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires.
Drive Tires 21 x 10.50-8 Kenda Tires
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 20-amp alternator.
Cup Holder Optional
Casters .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Power Components
Engine Brand Kohler®
Engine Model PCV740
Engine Type EFI Propane
Engine Series Command™ EFI Propane
Engine Speed 3,600 rpm
Engine Displacement 747
Air Filter Heavy-duty canister air filtration system
Drive Description Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors.
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 200 ft-lb clutch
Fuel Capacity 33.5-lb propane tank
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Standard; mechanical lift-assist springs.
Carb Compliant Yes
Fuel Type Propane EFI
Model Description Vantage S-Series 25 HP* Koh EFI PCV740 w/52" UltraCut Series 4 Deck - Propane

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Blades 3 Blades at 18" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions
Width 64.8 in. (164.6 cm)
Length 75 in. (188 cm)
Height 51 in. (127 cm)
Curb Weight 885

Specifications for model # VTS740PKC60400

Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Twin levers with no-tools adjustable front reference bar to modify forward ground speed.
Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires.
Drive Tires 20 x 10.50-8 Kenda Tires
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 20-amp alternator.
Cup Holder Optional
Casters .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Power Components
Engine Brand Kohler®
Engine Model PCV740
Engine Type EFI Propane
Engine Series Command™ EFI Propane
Engine Speed 3,600 rpm
Engine Displacement 747
Air Filter Heavy-duty canister air filtration system
Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors.
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 200 ft-lb clutch
Fuel Capacity 33.5-lb propane tank
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Standard; mechanical lift-assist springs.
Carb Compliant Yes
Fuel Type Propane EFI
Model Description Vantage S-Series 24 HP* Koh EFI PCV740 w/60" UltraCut Series 4 Deck - Propane

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Decks
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Blades 3 Blades at 20.50" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions
Width 72.8 in. (184.9 cm)
Length 74 in. (188 cm)
Height 50 in. (127 cm)
Curb Weight 893

Accessories


Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Trash Container

Part# 116-3297

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Thumbnail

Light Kit

Part# 116-3298

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella work lamp kit. The highly durable lenses repel dust, withstand impact and can even take on high-pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Models: Parts Only

Cup Holder

Part# 116-9676

Make a long day seem a little shorter by keeping your hydration at hand with this Vantage cup holder.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK526

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

Operator Controlled Discharge (Hand)

Part# 116-8430

The infinitely adjustable blocker door opens and closes, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4608

Fitting the Vantage 48 and 52" decks, this anti-scalp roller kit helps keep your deck above the turf in challenging conditions (contains 3 rollers and brackets).

Exmark Product Thumbnail

Weight Kit

Part# 116-2935

Add weight to the front end of your Exmark. Enhance stability and control when using Exmark stand-ons.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 116-3300

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 not included), attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

Light Kit

Part# 116-3298

Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella work lamp kit. The highly durable lenses repel dust, withstand impact and can even take on high-pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.

Exmark Product Models: Parts Only

Cup Holder

Part# 116-9676

Make a long day seem a little shorter by keeping your hydration at hand with this Vantage cup holder.

Exmark Product Thumbnail

Weight Kit

Part# 116-2935

Add weight to the front end of your Exmark. Enhance stability and control when using Exmark stand-ons.

Exmark Product Thumbnail

Jack Mount Receiver

Part# 116-3300

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 not included), attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

Exmark Product Thumbnail

Micro-Mulch System

Part# MK606

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Exmark Product Thumbnail

Operator Controlled Discharge (Hand)

Part# 116-8430

The infinitely adjustable blocker door opens and closes, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

Exmark Product Thumbnail

3-Bushel Bagger

Part# GC3602

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.)

Exmark Product Thumbnail

Equipment Cover

Part# 116-1379

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Exmark Product Thumbnail

Jack

Part# 127-6666

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Exmark Product Thumbnail

Anti-Scalp Roller Kit

Part# 116-4614

Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.

Exmark Product Thumbnail

Trash Container

Part# 116-3297

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Warranty


We have you covered. We take great pride in the quality of our products and stand behind every single one. You can view, download, or print the warranty statement for your equipment here.

Reviews