Mouseover to Zoom

Vantage X-Series EFI

Now with enhanced comfort and ergonomics.
If you’re a stand-on kind of guy, then here’s a mower that stands out from the rest. With its large operator platform and ergonomic levers, the Vantage is designed to keep you comfortable all day as you move from job to job to job. But comfort isn’t the only benefit going for it. It’s chock-full of everything that’s characteristically Exmark: durability, reliability, ruggedness, superior traction and handling. Of course you can’t forget about the kind of cut it delivers a cut that gives your goose bumps goose bumps.

Available Models

Eco-Friendly

Fuel Savings

Reduce Green House Gases

Easy to Start

Engine Efficiency

Sequential Fuel Injection

Model Specs


Specifications for model # VTX730EKC52400

Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires.
Drive Tires 20 x 10.50-8 Kenda Tires
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 20-amp alternator.
Cup Holder Optional
Casters .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Power Components
Engine Brand Kohler®
Engine Model ECV730
Engine Type Electronic Fuel Injected
Engine Series Command™ EFI
Engine Speed 3,600 rpm
Engine Displacement 747
Air Filter Heavy-duty canister air filtration system
Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors.
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 200 ft-lb clutch
Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location.
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Standard; mechanical lift-assist springs.
Carb Compliant No
Fuel Type Gas EFI
Decks
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Blades 3 Blades at 18" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions
Width 64.8 in. (164.6 cm)
Length 74 in. (188 cm)
Height 50 in. (127 cm)
Curb Weight 875

Specifications for model # VTX740EKC60400

Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires.
Drive Tires 20 x 10.50-8 Kenda Tires
Parking Brake Lever-actuated bar brake.
Blade Spindles No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Electrical 12-volt battery with 20-amp alternator.
Cup Holder Optional
Casters .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Power Components
Engine Brand Kohler®
Engine Model ECV740
Engine Type Electronic Fuel Injected
Engine Series Command™ EFI
Engine Speed 3,600 rpm
Engine Displacement 747
Air Filter Heavy-duty canister air filtration system
Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors.
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
PTO Engagement Warner 200 ft-lb clutch
Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location.
Fuel Indicator Yes - Float Gauge
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift Standard; mechanical lift-assist springs.
Carb Compliant No
Fuel Type Gas EFI
Decks
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Blades 3 Blades at 20.50" Length
Blade Tip Speed Approximately 18,500 fpm.
Dimensions
Width 72.8 in. (184.9 cm)
Length 74 in. (188 cm)
Height 50 in. (127 cm)
Curb Weight 883

Accessories


Accessories for model # VTX730EKC52400

Equipment Cover (Large)

Front Weight Kit

Trash Container

Vantage Light Kit

Jack Mount Receiver

Anti-Scalp Roller Kit

Operator-Controlled Discharge (Hand)

Cup Holder

Micro-Mulch System

3-Bushel Bagger

Jack

Accessories for model # VTX740EKC60400

Equipment Cover (Large)

Front Weight Kit

Trash Container

Vantage Light Kit

Jack Mount Receiver

Anti-Scalp Roller Kit

Operator-Controlled Discharge (Hand)

Cup Holder

Micro-Mulch System

3-Bushel Bagger

Jack

Warranty


We have you covered. We take great pride in the quality of our products and stand behind every single one. You can view, download, or print the warranty statement for your equipment here.

Reviews