No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67")diameter spindle shaft and hex blade drive.
22 x 9.5-12 K500
Front Caster Tires
13 x 6.5-6, smooth tread, pneumatic. Bushings
.375" thick caster yoke arms
Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Lever-actuated pawl brake.
High back seat with foam padded seat cushion, armrests and integral safety switch
12-volt battery with 15-amp alternator.
Engine hour meter, cup holder, tow hitch and jack receiver
Standard Engine Manufacturer's air filter
7-gallon (26.5-L) single fuel tank with single fill location.
Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
2-post foldable ROPS standard with seat belt and latch.
MagStop electromagnetic 125-ft-lb clutch
Drive Wheel Release
Allows unit movement without engine running.
Width / Cutting Deck
Deck Style Description
Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed
Approximately 18,500 fpm.
1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
3 Blades at 18.00" Length
64.3 in (163.3 cm)
81.7 in (207.5 cm)
69.7 inches (177.0 cm)