Lazer Z Diesel
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
26x12-12, 6ply Multi Trac®
Front Caster Tires
15 x 6.0-6, smooth-tread, semi-pneumatic.
.50" thick caster yoke arms.
Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Lever-actuated internal wet disc brake.
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
12-volt battery with 55-amp alternator.
12-volt plug-in, engine hour meter and cup holder
Electronically Governed IDI Turbo Diesel
Heavy-duty canister air filtration system with electronic vacuum sensor
12-gallon (45.4-L), side fuel tanks
Yes - mechanical float type
Kanzaki KPS-18T Transmission, 16-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-18 motors, hydraulic oil cooler.
Infinitely variable speed selection from 0–11.0 mph (18 kmph) forward, 0–6 mph (10 kmph) reverse.
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
2-post foldable ROPS standard with seat belt and latch.
Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Drive Wheel Release
Allows unit movement without engine running.
Width / Cutting Deck
Deck Style Description
Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to install finish cut baffle kit.
7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed
Approximately 18,500 fpm
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
3 Blades at 24.50" Length
78.2 in. (198.6 cm)
100.6 in. (255.5 cm)
71.8 in. (182.4 cm)