Lazer Z Diesel
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
26x12-12, 6ply Multi Trac®
Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Front Caster Tires
15 x 6.0-6, smooth-tread, semi-pneumatic.
Lever-actuated internal wet disc brake.
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
12-volt battery with 55-amp alternator.
12-volt plug-in, engine hour meter and cup holder
Electronically Governed IDI Turbo Diesel
Heavy-duty canister air filtration system with electronic vacuum sensor
12-gallon (45.4-L), side fuel tanks
Yes - mechanical float type
Kanzaki KPS-18T Transmission, 16-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-18 motors, hydraulic oil cooler.
Infinitely variable speed selection from 0–11.0 mph (18 kmph) forward, 0–6 mph (10 kmph) reverse.
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
2-post foldable ROPS standard with seat belt and latch.
Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Drive Wheel Release
Allows unit movement without engine running.
.50" thick caster yoke arms.
Width / Cutting Deck
Deck Style Description
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed
Approximately 17,600 fpm
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
3 Blades at 20.50" Length
72.8 in. (184.9 cm)
9643 in. (244.9 cm)
71.8 in. (182.4 cm)