No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive.
23 x 9.5-12 Super Turf (142-4264)
Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Front Caster Tires
13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings (126-3289)
Lever-actuated pawl brake.
Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
12-volt battery with 15-amp alternator.
Engine hour meter, cup holder, tow hitch and jack receiver
Cyclonic Air Cleaner
7-gallon (26.5-L) single fuel tank with single fill location.
Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Infinitely variable speed selection from 0–9.0 mph (14.5 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
2-post foldable ROPS standard with seat belt and latch.
MagStop electromagnetic 125-ft-lb clutch
Drive Wheel Release
Allows unit movement without engine running.
.375" thick caster yoke arms
Width / Cutting Deck
Deck Style Description
Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed
Approximately 18,500 fpm.
1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
2 Blades at 24.5" Length
61 in (155 cm)
85 in (216 cm)
70 in (178 cm)