Turf Tracer X-Series
Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
.38" thick caster yoke arms
Front Caster Tires
11 x 4.0-5, smooth tread, semi-pneumatic.
18 x 8.5-8, 4-ply Turf Master®
Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Lever-actuated mechanical compression.
12-volt battery with 20-amp alternator.
Enhanced engine hour meter
Heavy-duty canister air filtration system
Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54cm) tapered shafts.
Infinitely variable speed selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse.
Electromagnetic 200 ft-lbs clutch.
5-gallon (18.9-L) fuel tank.
Drive Wheel Release
Allows unit movement without engine running.
Manual lift with hairpin from hole to hole for position adjustment.
Electronic Fuel Injected
Deck Style Description
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength.
1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Blade Tip Speed
Approximately 18,500 fpm.
3 Blades at 18.00" Length
64.8 in. (164.6 cm)
84.8 in. (215.4cm)
45.0 in. (114.3 cm)