Turf Tracer S-Series
Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
.38" thick caster yoke arms
Front Caster Tires
9 x 3.5-4, smooth-tread, semi-pneumatic.
16 x 6.5-8, 4-ply Turf Master®
Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Lever-actuated mechanical compression.
No battery, recoil start w/ 5 amp clutch coil
Engine hour meter
Standard Engine Manufacturer's air filter
Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts.
Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
Electromagnetic 105 ft-lbs clutch.
5-gallon (18.9-L) fuel tank.
Drive Wheel Release
Allows unit movement without engine running.
Manual lift with hairpin from hole to hole for position adjustment.
Deck Style Description
Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Blade Tip Speed
Approximately 18,500 fpm.
2 Blades at 18.00" Length
47.5 in. (120.7 cm)
77.7 in. (197.4 cm)
42.0 in. (106.7 cm)