Side-By-Side Comparison Franklin WI | Thelen Power Equipment
LZE651GKA484A2
Lazer Z E-Series
Power Components
Transmission Speeds
Infinitely Variable
Engine Brand
Kawasaki
Engine Model
FX651V
Engine Displacement
726
Transmission
Hydrostatic
Speed
Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Engine Series
V-Twin
Engine Spec
FX651V-FS07-R
Engine Speed
3,750 RPM
Drive
Hydro-Drive
Fuel Capacity
12-gallon (45.4-L), single fuel tank with single fill location.
Air Filter
Heavy-duty canister air filtration system
Drive Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Fuel Type
Gas Carbureted
PTO Engagement
MagStop Electromagnetic 175 ft-lb clutch with spot brake
Fuel Indicator
Yes - electronic Sender
Drive Wheel Release
Allows unit movement without engine running.
Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Carb Compliant
No
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS
2-post foldable ROPS standard with seat belt and latch.
Equipment
UPC
193308000442
Starter
Electric
Steering Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Caster Forks
.50" thick caster yoke arms.
Front Caster Tires
13 x 5.0-6, smooth-tread, semi-pneumatic.
Drive Tires
23 x 9.50-12, 4 ply Super Turf®
Parking Brake
Lever-actuated disc brake.
Tractor Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Electrical
12-volt battery with 15-amp alternator.
Standard Features
Engine hour meter and cup holder
Seat
Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Dimensions
Width
59.6 in. (151.4 cm)
Height
70.5 in. (179.1 cm)
Length
79.2 in. (201.2 cm)
Curb Weight
1118
Decks
Deck Style
Floating Deck
Deck Style Description
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck
48"
Deck Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Cutting Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blade Tip Speed
Approximately 18,500 fpm.
Blades
3 Blades at 16.25" Length