Welded, heavy-duty 1.5" x 3" tubular steel.
Twin levers with adjustable front reference bar to modify forward ground speed.
21x7.00-10 Kenda K505
Front Caster Tires
9 x 4.50-5, smooth-tread, semipneumatic tires with sealed ball bearings.
.38 thick caster yoke arms with sealed ball bearings
Lever-actuated bar brake.
No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
12-volt battery with 15-amp alternator.
Engine Hour Meter
Standard Engine Manufacturer's air filter
Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors.
Infinitely variable speed selection 0–7.5 mph (12.1 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
Warner 105 ft-lb clutch
5-gallon (18.9-L), single fuel tank with single fill location.
Yes - Float Gauge
Drive Wheel Release
Allows unit movement without engine running.
Operator Presence Controls (OPC) with safety interlock system indicators
Single point HOC
7-gauge top that is formed and continuously seam welded, 7-gauge side skirt
Deck Style Description
Full-floating UltraCut Series 3. Side discharge standard, with flexible discharge chute and option to bag or mulch.
Width / Cutting Deck
1.0" (2.54 cm) to 4.5" (11.4 cm) in 0.25" (.64 cm) increments
2 Blades at 16.25" Length
Blade Tip Speed
Approximately 18,500 fpm.