Side-By-Side Comparison Columbia SC | Hilton's Power Equipment
LZX801CKA606C1
Lazer Z X-Series
Equipment
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
Drive Tires
24 x 12.0-12, 4-ply Turf Master®
Front Caster Tires
13 x 6.5-6 smooth tread, semi-pneumatic tires.
Caster Forks
.50" thick caster yoke arms.
Tractor Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Parking Brake
Lever-actuated disc brake.
Seat
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical
12-volt battery with 15-amp alternator.
Standard Features
Engine hour meter and cup holder
UPC
193308000671
Power Components
Engine Brand
Kawasaki
Engine Model
FX801V
Engine Displacement
852
Engine Series
V-Twin
Engine Speed
3,750 RPM
Air Filter
Heavy-duty canister air filtration system
Fuel Type
Gas Carbureted
Fuel Capacity
12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator
Yes - electronic Sender
Drive
Hydro-Drive
Drive Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed
Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse
Carb Compliant
Yes
Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS
2-post foldable ROPS standard with seat belt and latch.
PTO Engagement
MagStop Electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release
Allows unit movement without engine running.
Engine Spec
AS19
Decks
Width / Cutting Deck
60"
Deck Style
Floating Deck
Deck Style Description
Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed
Approximately 18,500 fpm.
Cutting Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades
3 Blades at 20.50" Length
Dimensions
Width
72.8 in. (184.9 cm)
Length
83.1 in. (211.1 cm)
Height
70.5 in. (179.1 cm)
Curb Weight
1302