Side-By-Side Comparison Jackson NJ | County Line Hardware
RZE708GEM48C00
Radius E-Series
Equipment
Starter
Electric
Steering Control
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Caster Forks
.375" thick caster yoke arms
Front Caster Tires
13 x 6.5-6, smooth tread, pneumatic. Bushings
Drive Tires
22 x 9.5-12 Super Turf TL
Tractor Frame
Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Electrical
12-volt battery with 15-amp alternator.
Standard Features
Engine hour meter, cup holder, tow hitch and jack receiver
Seat
High back seat with foam padded seat cushion, armrests and integral safety switch
Power Components
Transmission Speeds
Infinitely Variable
Engine Brand
Exmark
Engine Model
LC2P77F
Engine Displacement
708
Speed
Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
Engine Series
V-Twin
Fuel System
Carbureted
Drive
Hydro-Drive
Engine Speed
3,600 rpm
Engine Spec
K5045
Fuel Capacity
7-gallon (26.5-L) single fuel tank with single fill location.
Air Filter
Standard Engine Manufacturer's air filter
Drive Description
Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
PTO Engagement
MagStop electromagnetic 125-ft-lb clutch
Fuel Type
Gas Carbureted
Fuel Indicator
Translucent Visual
Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Carb Compliant
No
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS
2-post foldable ROPS standard with seat belt and latch.
Decks
Deck Style
Floating Deck
Deck Style Description
Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck
48"
Deck Construction
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Cutting Heights
1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Blade Tip Speed
Approximately 18,500 fpm.
Blades
2 Blades at 24.5" Length
Dimensions
Width
61 in (155 cm)
Height
69.7 in (177.0 cm)
Length
82.9 in (210.6 cm)
Curb Weight
849