Heavy Duty cast iron right-angle gearboxes.
18 x 10.5-10 Multi-Trac® C/S.
Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0", strategically located, continuous force counterweight springs.
FeatherTouch hand-control drive levers, low-force constant speed lever.
Front Caster Tires
8 x 3.0-4 semi-pneumatic.
Wet disc, internal in wheel motor.
Commercial grade high back contoured foam padded with hinged mounting.
12-volt battery with 20-amp alternator.
Heavy-duty canister air filtration
7.5-gallon (28.4-L), pivoting tank for easier engine service.
New Dual Hydro-Gear 12 cc variable displacement pumps power Hydro-Gear H Series motors.
Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–4.5 mph (7.2 kmph) reverse.
Deck latch for easier height of cut adjustment
Operator Presence Controls (OPC) and drive system interlock.
Optional 2-post foldable ROPS with seat belt and latch.
Lever-actuated clutching belt with 6" brake band.
Drive Wheel Release
Allows movement without engine running.
0.50" thick rear caster fork
Width / Cutting Deck
Deck Style Description
Full floating center discharge cutting deck for dedicated bagging with patented Fill Reduction Baffles and heavy duty gear driven spindle assembly.
7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports.
Blade Tip Speed
Approximately 18,500 fpm.
1.0" (2.54 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments .
2 Blades at 25" Length
9.5 bushel (76 gallons)
49.2 in. (125.0 cm)
94.5 in. (240.0 cm)
51.2 in. (130.0 cm)