
Navigator
Available Models
More Capacity, More Productivity
Easy to Maintain
Fill Reduction
“FeatherTouch” Controls
Heavy Duty Gear Box
Deck Depth
Blower Size
Engine Orientation
Model Specs
Specifications for model # NVS730AKC48000
Equipment | |
---|---|
Blade Spindles | Heavy Duty cast iron right-angle gearboxes. |
Drive Tires | 18 x 10.5-10 Multi-Trac® C/S. |
Tractor Frame | Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0", strategically located, continuous force counterweight springs. |
Steering Control | FeatherTouch hand-control drive levers, low-force constant speed lever. |
Front Caster Tires | 8 x 3.0-4 semi-pneumatic. |
Parking Brake | Wet disc, internal in wheel motor. |
Seat | Commercial grade high back contoured foam padded with hinged mounting. |
Electrical | 12-volt battery with 20-amp alternator. |
UPC | 193308000275 |
Power Components | |
---|---|
Engine Brand | Kohler® |
Engine Model | ECH730 |
Engine Displacement | 747 |
Engine Series | Command™ EFI |
Engine Speed | 3,600 rpm |
Air Filter | Heavy-duty canister air filtration |
Fuel Type | Gas EFI |
Fuel Capacity | 7.5-gallon (28.4-L), pivoting tank for easier engine service. |
Fuel Indicator | Translucent Visual |
Drive | Hydro-Drive |
Drive Description | New Dual Hydro-Gear 12 cc variable displacement pumps power Hydro-Gear H Series motors. |
Speed | Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–4.5 mph (7.2 kmph) reverse. |
Carb Compliant | Yes |
Safety Package | Operator Presence Controls (OPC) and drive system interlock. |
ROPS | Optional 2-post foldable ROPS with seat belt and latch. |
PTO Engagement | Lever-actuated clutching belt with 6" brake band. |
Drive Wheel Release | Allows movement without engine running. |
Casters | 0.50" thick rear caster fork |
Model Description |
Navigator 23 HP* Koh EFI ECH730 w/48" CD Deck
*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance
with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine
horsepower on these mowers may be significantly lower. |
Decks | |
---|---|
Width / Cutting Deck | 48" |
Deck Style | Floating Deck |
Deck Style Description | Full floating center discharge cutting deck for dedicated bagging with patented Fill Reduction Baffles and heavy duty gear driven spindle assembly. |
Deck Construction | 7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports. |
Blade Tip Speed | Approximately 18,500 fpm. |
Cutting Heights | 1.0" (2.54 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments . |
Blades | 2 Blades at 25" Length |
Bag Capacity | 9.5 bushel (76 gallons) |
Dimensions | |
---|---|
Width | 49.2 in. (125.0 cm) |
Length | 94.5 in. (240.0 cm) |
Height | 51.2 in. (130.0 cm) |
Curb Weight | 1170 |
Specifications for model # NVS740CKC42000
Equipment | |
---|---|
Blade Spindles | Heavy Duty cast iron right-angle gearboxes. |
Drive Tires | 18 x 10.5-10 Multi-Trac® C/S. |
Tractor Frame | Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0", strategically located, continuous force counterweight springs. |
Steering Control | FeatherTouch hand-control drive levers, low-force constant speed lever. |
Front Caster Tires | 8 x 3.0-4 semi-pneumatic. |
Parking Brake | Wet disc, internal in wheel motor. |
Seat | Commercial grade high back contoured foam padded with hinged mounting. |
Electrical | 12 volt battery with 15-amp alternator |
UPC | 193308000282 |
Power Components | |
---|---|
Engine Brand | Kohler® |
Engine Model | CH740 |
Engine Displacement | 725 |
Engine Series | Command™ |
Engine Speed | 3,600 rpm |
Air Filter | Heavy-duty canister air filtration |
Fuel Type | Gas Carbureted |
Fuel Capacity | 7.5-gallon (28.4-L), pivoting tank for easier engine service. |
Fuel Indicator | Translucent Visual |
Drive | Hydro-Drive |
Drive Description | New Dual Hydro-Gear 12 cc variable displacement pumps power Hydro-Gear H Series motors. |
Speed | Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–4.5 mph (7.2 kmph) reverse. |
Carb Compliant | Yes |
Safety Package | Operator Presence Controls (OPC) and drive system interlock. |
ROPS | Optional 2-post foldable ROPS with seat belt and latch. |
PTO Engagement | Lever-actuated clutching belt with 6" brake band. |
Drive Wheel Release | Allows movement without engine running. |
Casters | 0.50" thick rear caster fork |
Model Description |
Navigator 25 HP* Koh CH740 w/42" CD Deck
*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance
with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine
horsepower on these mowers may be significantly lower. |
Decks | |
---|---|
Width / Cutting Deck | 42" |
Deck Style | Floating Deck |
Deck Style Description | Full floating center discharge cutting deck for dedicated bagging with patented Fill Reduction Baffles and heavy duty gear driven spindle assembly. |
Deck Construction | 7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports. |
Blade Tip Speed | Approximately 18,500 fpm. |
Cutting Heights | 1.0" (2.54 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments . |
Blades | 2 Blades at 22" Length |
Bag Capacity | 9.5 bushel (76 gallons) |
Dimensions | |
---|---|
Width | 43.2 in. (109.7 cm) |
Length | 91.8 in. (233.2 cm) |
Height | 51.2 in. (130.0 cm) |
Curb Weight | 1140 |
Accessories
![]() |
Dump TubsPart# 130-8457Debris can be quickly and conveniently managed with our two polyethylene tub inserts. These removable tubs enable the weight of a full, 9.5-bushel hopper to be split and unloaded, one tub at a time. |
![]() |
Light KitPart# 130-8469Keep mowing after the sun goes down with brilliant, 35-watt halogen power from this Navigator work lamp kit. The highly durable lenses repel dust, and withstand impact. With twice the illumination output of a conventional work lamp, the kit also features a pivot base. |
Rollover Protection SystemPart# 126-0369Optimize safe operation with this Roll Over Protection System. |
|
![]() |
Tire and Wheel AssemblyPart# 116-5634ASM, TIRE AND WHEEL 18 X 10.5-10 |
Automatic Door Opener KitPart# 130-8470Enhance your productivity with this quick opening auto door system. |
|
![]() |
Harness Add-On Accessory KitPart# 109-9798Take the hassle out of dual accessory fit up with this add-on harness. |
Powered DumpPart# 130-8458Improve productivity by not having to leave your operator position with this power dump accessory. A full load of grass can be managed with the push of a button. Or, if dumping by hand is your preference, this accessory automatically disengages and re-engages the hopper without operator intervention. |
|
![]() |
Narrow Drive Tire KitPart# 116-9590The perfect pairing with tire chains in snow operations with this narrow drive kit.Narrow Drive Tire Kit (Pair) 18 x 18.5-10 |
![]() |
Dual Semi-Pneumatic Rear CastersPart# 103-9005Spread your hopper load to minimize turf impact with this split caster kit. |
Comfort Ride Seat SuspensionPart# 130-8471A great value in comparison to more expensive full-suspension seats, our CustomRide suspension system easily mounts to your existing EVC operator seat. System features enable operator to customize suspension settings to their individual weight and personal preference. Fits all Lazer Z models. |
|
Micro-Mulch SystemPart# MKNAV48Turns the dedicated bagging deck into a mulcher. The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Single one piece bolt in baffle redirects clippings away from the center rear discharge opening. |
![]() |
Narrow Drive Tire KitPart# 116-9590The perfect pairing with tire chains in snow operations with this narrow drive kit.Narrow Drive Tire Kit (Pair) 18 x 18.5-10 |
Comfort Ride Seat SuspensionPart# 130-8471A great value in comparison to more expensive full-suspension seats, our CustomRide suspension system easily mounts to your existing EVC operator seat. System features enable operator to customize suspension settings to their individual weight and personal preference. Fits all Lazer Z models. |
|
![]() |
Dual Semi-Pneumatic Rear CastersPart# 103-9005Spread your hopper load to minimize turf impact with this split caster kit. |
![]() |
Harness Add-On Accessory KitPart# 109-9798Take the hassle out of dual accessory fit up with this add-on harness. |
Automatic Door Opener KitPart# 130-8470Enhance your productivity with this quick opening auto door system. |
|
![]() |
Light KitPart# 130-8469Keep mowing after the sun goes down with brilliant, 35-watt halogen power from this Navigator work lamp kit. The highly durable lenses repel dust, and withstand impact. With twice the illumination output of a conventional work lamp, the kit also features a pivot base. |
Rollover Protection SystemPart# 126-0369Optimize safe operation with this Roll Over Protection System. |
|
![]() |
Dump TubsPart# 130-8457Debris can be quickly and conveniently managed with our two polyethylene tub inserts. These removable tubs enable the weight of a full, 9.5-bushel hopper to be split and unloaded, one tub at a time. |
Powered DumpPart# 130-8458Improve productivity by not having to leave your operator position with this power dump accessory. A full load of grass can be managed with the push of a button. Or, if dumping by hand is your preference, this accessory automatically disengages and re-engages the hopper without operator intervention. |
|
Micro-Mulch SystemPart# MKNAV42Turns the dedicated bagging deck into a mulcher. The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Single one piece bolt in baffle redirects clippings away from the center rear discharge opening. |
|
![]() |
Tire and Wheel AssemblyPart# 116-5634ASM, TIRE AND WHEEL 18 X 10.5-10 |
Warranty
We have you covered. We take great pride in the quality of our products and stand behind every single one. You can view, download, or print the warranty statement for your equipment here.