Side-By-Side Comparison Tifton GA | Chris' Mower Clinic LLC
RZX801GKA524A3
Radius X-Series
Equipment
UPC
193308225203
Starter
Electric
Steering Control
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Front Caster Tires
13 x 6.5-6, smooth tread, pneumatic. Sealed Taper Roller Bearings
Drive Tires
24 x 12-12 K3012
Parking Brake
Lever-actuated pawl brake.
Tractor Frame
Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Electrical
12-volt battery with 15-amp alternator.
Power Components
Engine Brand
Kawasaki
Transmission Speeds
Infinitely Variable
Engine Displacement
852cc
Fuel System
Carbureted
Transmission
Hydrostatic
Speed
Infinitely variable speed selection from 0–10.0 mph (16.1 kmph) forward, 0–6.0 mph (9.7kmph) reverse.
Engine Series
V-Twin
Engine Speed
3,820 rpm
Drive
Hydro-Drive
Engine Spec
FX801V-S04-R
Air Filter
Heavy-duty canister air filtration system
Fuel Capacity
7-gallon (26.5-L) single fuel tank with single fill location.
Drive Description
Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
PTO Engagement
MagStop electromagnetic 200-ft-lb clutch
Fuel Type
Gas Carbureted
Drive Wheel Release
Allows unit movement without engine running.
Fuel Indicator
Translucent Visual
Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Carb Compliant
No
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS
2-post foldable ROPS standard with seat belt and latch.
Dimensions
Width
64.3 in (163.3 cm)
Height
70 in (178 cm)
Length
80.3in (204.0 cm)
Curb Weight
992
Decks
Deck Style
Floating Deck
Deck Style Description
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck
52"
Deck Construction
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Cutting Heights
1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Blade Tip Speed
Approximately 18,500 fpm.
Blades
3 Blades at 18.00" Length