| Maintenance Service Interval |
Maintenance Procedure |
| |
LUBRICATION CHART |
| After the first 5 hours |
|
| After the first 100 hours |
- Check wheel hub-slotted torque specification.
|
| After the first 250 hours |
- Change the hydraulic filter.
|
| Before each use or daily |
- Check the engine oil level.
- Check the mower blades.
- Check the safety interlock system.
- Check for loose hardware.
- Grease the caster wheel bearings.
- Grease caster pivots.
- Clean engine air cooling system (See Engine Owner’s Manual)
- Clean the grass build-up from under the deck.
|
| Every 25 hours |
- Service the air cleaner. (May need more often under severe conditions. See the Engine Owner’s manual for additional information.)
|
| Every 40 hours |
- Check the hydraulic oil level.
- Check the tire pressures.
- Check the condition of the belts.
- Grease the pump drive idler pivot.
- Grease the pump control bearings.
- Grease the mower deck idler pivot
|
| Every 80 hours |
- Remove engine shrouds and clean cooling fins.
|
| Every 100 hours |
- Change the engine oil. (May need more often under severe conditions.)
|
| Every 160 hours |
|
| Every 500 hours |
- Check wheel hub-slotted torque specification.
|
| Monthly |
- Grease the PTO engagement bellcrank.
|
| Yearly |
- Change the hydraulic filter.
|
