| Maintenance Service Interval |
Maintenance Procedure |
| |
LUBRICATION CHART |
| After the first 5 hours |
|
| After the first 200 hours |
- Change the hydraulic system filter.
|
| Before each use or daily |
- Check the safety interlock system.
- Check the air
- Cleaner for dirty, loose, or damage.
- Check the air intake and cooling areas,
- Clean as necessary.
- Check the oil level before starting or after every 8 hours.
- Check the hydraulic oil level in the expansion tank.
- Check the mower blades.
- Clean the mower housing.
|
| Every 25 hours |
- Grease all lubrication points.
- Service the air cleaner. (May need more often under extremely dusty or dirty conditions.)
- Check the tire pressure.
- Check the belts.
|
| Every 100 hours |
- Replace the paper element. (More often under extremely dusty, dirty conditions.)
- Replace the air cleaner element.
- Change the engine oil and filter.
- Clean the blower housing. (More often under dirty conditions).
- Replace the fuel filter.
|
| Every 200 hours |
|
| Every 500 hours |
|
| Before storage |
- Charge the battery and disconnect the battery cables.
- Perform all maintenance procedures before storage.
- Paint any chipped surfaces.
|
| Monthly |
- Check the battery charge.
|
