Mouseover to Zoom

Pioneer S-Series

Proof that value and performance are not mutually exclusive.
The Pioneer S-Series gives lawn care professionals even more to like. The 48- and 52-inch models receive the patented UltraCut™ Series 3 deck system. And the 60-inch gets the UltraCut Series 4, the same deck used on our Lazer Z® S-Series mower, featuring heavy-duty cutter housings and a deeper deck for increased productivity. The S-Series also gives you the choice of a ZT3100 (on 48”–52”). The 60” models ZT3400 integrated transmission provide a seriously smooth ride. Can also reach speeds up to 9 mph, which results in maximum productivity. Comes equipped with the full-suspension seat which enhances operator comfort. Not available in CA.

Superior Air Filtration

Rear Discharge Deck (60”)

Maintenance-Free Spindles

Commercial Grade Deck

Productivity

Comfort Counts

Model Specs


Specifications for model # PNS710GKC48300

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Drive Tires 22 x 9.5-12 Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 2" square tublar steel.
Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment.
Front Caster Tires 13 x 5.0-6, smooth tread, pneumatic.
Parking Brake Lever-actuated pawl brake.
Seat Commercial Grade High Back contoured foam padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ZT710
Engine Displacement 725
Engine Series Confidant™
Engine Type Carbureted
Engine Speed 3,700 rpm
Air Filter Cyclonic Air Cleaner
Fuel Type Gas Carbureted
Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location.
Fuel Indicator None
Drive Hydro-Drive
Drive Description Two Hydro Gear ZT3100 hydrostatic transmission with charge pumps, relief valves, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components.
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 175-ft-lb clutch
Drive Wheel Release Allows unit movement without engine running.
Casters .38" thick caster yoke arms
Decks
Width / Cutting Deck 48"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Blades 3 Blades at 16.25" Length
Dimensions
Width 60 in. (152 cm)
Length 78 in. (198 cm)
Height 72 in. (183 cm)
Curb Weight 862

Specifications for model # PNS720GKC52300

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Drive Tires 22 x 9.5-12 Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 2" square tublar steel.
Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment.
Front Caster Tires 13 x 5.0-6, smooth tread, pneumatic.
Parking Brake Lever-actuated pawl brake.
Seat Commercial Grade High Back contoured foam padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ZT720
Engine Displacement 725
Engine Series Command™
Engine Type Carbureted
Engine Speed 3,700 rpm
Air Filter Cyclonic Air Cleaner
Fuel Type Gas Carbureted
Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location.
Fuel Indicator None
Drive Hydro-Drive
Drive Description Two Hydro Gear ZT3100 hydrostatic transmission with charge pumps, relief valves, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components.
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 175-ft-lb clutch
Drive Wheel Release Allows unit movement without engine running.
Casters .38" thick caster yoke arms
Decks
Width / Cutting Deck 52"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Blades 3 Blades at 18.00" Length
Dimensions
Width 65 in. (165 cm)
Length 78 in. (198 cm)
Height 72 in. (183 cm)
Curb Weight 868

Specifications for model # PNS730GKA604A3

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Drive Tires 23 x 10.5-12 Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 2" square tublar steel.
Steering Control Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 3 height positions.
Front Caster Tires 13 x 6.50-6, smooth tread, pneumatic.
Parking Brake Lever-actuated pawl brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Hinged mounting. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kawasaki®
Engine Model FX730V
Engine Displacement 726
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,700 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 7-gallon (26.5.-L) single fuel tank.
Fuel Indicator None
Drive Hydro-Drive
Drive Description Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Speed Infinitely variable speed selection from 0–9.0 mph (14.5kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position via foot-operated, deck-lift system.
Blades 3 Blades at 20.50" Length
Dimensions
Width 73 in. (185 cm)
Length 79 in. (200.2 cm)
Height 72 in. (183 cm)
Curb Weight 828

Specifications for model # PNS740GKC60400

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Drive Tires 23 x 10.5-12 Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 2" square tublar steel.
Steering Control Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 3 height positions.
Front Caster Tires 13 x 5.0-6, smooth tread, pneumatic.
Parking Brake Lever-actuated pawl brake.
Seat Commercial Grade High Back contoured foam padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ZT740
Engine Displacement 747
Engine Series Confidant™
Engine Type Carbureted
Engine Speed 3,700 rpm
Air Filter Cyclonic Air Cleaner
Fuel Type Gas Carbureted
Fuel Capacity 7-gallon (26.5.-L) single fuel tank.
Fuel Indicator None
Drive Hydro-Drive
Drive Description Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Speed Infinitely variable speed selection from 0–9.0 mph (14.5kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch
Drive Wheel Release Allows unit movement without engine running.
Casters .38" thick caster yoke arms
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position via foot-operated, deck-lift system.
Blades 3 Blades at 20.50" Length
Dimensions
Width 73 in. (185 cm)
Length 79 in. (200.2 cm)
Height 72 in. (183 cm)
Curb Weight 948

Specifications for model # PNS740GKC604A4

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Drive Tires 23 x 10.5-12 Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 2" square tublar steel.
Steering Control Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 3 height positions.
Front Caster Tires 13 x 5.0-6, smooth tread, pneumatic.
Parking Brake Lever-actuated pawl brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Hinged mounting. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ZT740
Engine Displacement 747
Engine Series Confident™
Engine Type Carbureted
Engine Speed 3,700 rpm
Air Filter Cyclonic Air Cleaner
Fuel Type Gas Carbureted
Fuel Capacity 7-gallon (26.5.-L) single fuel tank.
Fuel Indicator None
Drive Hydro-Drive
Drive Description Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Speed Infinitely variable speed selection from 0–9.0 mph (14.5kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch
Drive Wheel Release Allows unit movement without engine running.
Casters .38" thick caster yoke arms
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position via foot-operated, deck-lift system.
Blades 3 Blades at 20.50" Length
Dimensions
Width 73 in. (185 cm)
Length 79 in. (200.2 cm)
Height 72 in. (183 cm)
Curb Weight 948

Specifications for model # PNS740GKC60RA3

Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Drive Tires 23 x 10.5-12 Super Turf®
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 2" square tublar steel.
Steering Control Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 3 height positions.
Front Caster Tires 13 x 6.50-6, smooth tread, pneumatic.
Parking Brake Lever-actuated pawl brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Hinged mounting. Adjustment: Fore and aft from Operators’ Position.
Electrical 12-volt battery with 15-amp alternator.
Power Components
Engine Brand Kohler®
Engine Model ZT740
Engine Displacement 747
Engine Series Confidant™
Engine Type Carbureted
Engine Speed 3,700 rpm
Air Filter Cyclonic Air Cleaner
Fuel Type Gas Carbureted
Fuel Capacity 7-gallon (26.5.-L) single fuel tank.
Fuel Indicator None
Drive Hydro-Drive
Drive Description Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Speed Infinitely variable speed selection from 0–9.0 mph (14.5kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms
Decks
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position via foot-operated, deck-lift system.
Blades 3 Blades at 20.50" Length
Dimensions
Width 66.2 in. (168.1 cm)
Length 80.8 in (205.2 cm)
Height 72 in. (183 cm)
Curb Weight 842

Accessories


Accessories for model # PNS710GKC48300

Hitch Kit

ROPS Sun Shade

Hella® Work Lamp Kit

Equipment Cover (Large)

Jack Mount Receiver

2-Bag Collection System

Completing Kit

Exmark Turf Striper

KIT-SEAT SUSPENSION

Trash Container Kit

Micro-Mulch System

Jack

Accessories for model # PNS720GKC52300

Hitch Kit

ROPS Sun Shade

Hella® Work Lamp Kit

Equipment Cover (Large)

Jack Mount Receiver

2-Bag Collection System

Completing Kit

Exmark Turf Striper

KIT-SEAT SUSPENSION

Trash Container Kit

3-Bushel Bagger

Micro-Mulch System

Jack

Accessories for model # PNS730GKA604A3

Hitch Kit

ROPS Sun Shade

Hella® Work Lamp Kit

Equipment Cover (Large)

Jack Mount Receiver

2-Bag Collection System

Anti-Scalp Roller Kit

Exmark Turf Striper

Completing Kit

Deck Lift Assist

Trash Container Kit

Micro-Mulch System

3-Bushel Bagger

Jack

Accessories for model # PNS740GKC60400

Hitch Kit

ROPS Sun Shade

Hella® Work Lamp Kit

Equipment Cover (Large)

Jack Mount Receiver

2-Bag Collection System

Anti-Scalp Roller Kit

Exmark Turf Striper

Completing Kit

Deck Lift Assist

KIT-SEAT SUSPENSION

Trash Container Kit

Micro-Mulch System

3-Bushel Bagger

Jack

Accessories for model # PNS740GKC604A4

Hitch Kit

ROPS Sun Shade

Hella® Work Lamp Kit

Equipment Cover (Large)

Jack Mount Receiver

2-Bag Collection System

Anti-Scalp Roller Kit

Exmark Turf Striper

Completing Kit

Deck Lift Assist

Trash Container Kit

Micro-Mulch System

3-Bushel Bagger

Jack

Accessories for model # PNS740GKC60RA3

Hitch Kit

ROPS Sun Shade

Hella® Work Lamp Kit

Equipment Cover (Large)

Jack Mount Receiver

Finish Cut Baffles

White Deck Bumpers

Anti-Scalp Roller Kit

Trash Container Kit

Jack

Warranty


We have you covered. We take great pride in the quality of our products and stand behind every single one. You can view, download, or print the warranty statement for your equipment here.

Reviews


REVIEW SNAPSHOT®

by PowerReviews
ExmarkPioneer S-Series
 
4.8

(based on 38 reviews)

Ratings Distribution

  • 5 Stars

     

    (29)

  • 4 Stars

     

    (9)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Cut quality (34)
  • Heavy duty construction (32)
  • Zero-turning radius (32)
  • Ease of use (31)
  • Steering / controllability (31)

Cons

  • Poor fuel efficiency (4)
  • Poor engine performance / brand (3)

Best Uses

  • Large lawns (2+ acres) (26)
  • Residential mowing (21)
  • Medium lawns (1-2 acres) (20)
  • Professional / commercial mowing (12)
  • Side discharge (12)
    • Engine Brand?:
    • Kohler (24), Kawasaki (7)
    • Deck Size?:
    • 60" (13), 48" (5), 52" (4)
    • Reviewer Profile:
    • Homeowner (25), Acreage owner (11), Landscape professional (6)
    • Personal or Professional Use?:
    • Personal (32), Professional (6)

Reviewed by 38 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
4.0

I would look at a z series

By 

from Texas

About Me Landscape Professional

Pros

  • Cut Quality
  • Ease of Maintenance
  • Fuel Efficiency
  • Speed
  • Styling / Appearance
  • Zero-Turning Radius

Cons

  • Undesirable Styling / Appearance

Best Uses

  • Large Lawns (2+ acres)
  • Medium Lawns (1-2 acres)
  • Mulching
  • Professional / Commercial Mowing
  • Small Lawns (Less than 1 acre)

Comments about Exmark Pioneer S-Series:

commercialy love the cut, really wish the front tires where wider and bigger many would help the ride

Comment on this reviewHelp Icon

(3 of 3 customers found this review helpful)

 
5.0

Great Mower for a Great Price

By 

from Clearwater Beach, FL

About Me Landscape Professional

Verified Reviewer

Pros

  • Availability & Performance of Accessories
  • Comfort & Ergonomics
  • Cut Quality
  • Ease of Maintenance
  • Ease of Use
  • Engine Performance / Brand
  • Fuel Efficiency
  • Heavy Duty Construction
  • Speed
  • Steering / Controllability
  • Styling / Appearance
  • Zero-Turning Radius

Cons

    Best Uses

    • Large Lawns (2+ acres)
    • Medium Lawns (1-2 acres)
    • Residential Mowing
    • Side Discharge
    • Small Lawns (Less than 1 acre)

    Comments about Exmark Pioneer S-Series:

    I have had this mower for 5 years now. Just passed 1500 hours on the unit. Overall this is a fantastic mower for a very competitive price. The 44"deck is small enough to fit through most residential gates, yet big enough to mow large areas very fast. I use it on residential propertys that range from very small, up to 5 acre lots. Leaves a great cut every time. I maintain many forclosed propertys where this mower can cut grass that is 5 feet tall without a problem. Buying this unit was a Great decision!

    Service and delivery comments:

    Puchased mower off the showroom floor. Everything was in tip top shape. Guys went over everything with me in detail.

    Comment on this reviewHelp Icon

    (2 of 2 customers found this review helpful)

     
    4.0

    After A Year of ownership

    By 

    from Frederick, PA

    About Me Homeowner

    Verified Buyer

    Pros

    • Comfort & Ergonomics
    • Cut Quality
    • Ease of Use
    • Engine Performance / Brand
    • Heavy Duty Construction
    • Steering / Controllability

    Cons

      Best Uses

      • Medium Lawns (1-2 acres)

      Comments about Exmark Pioneer S-Series:

      After a year of use I have no complaints about the mower. I have put about 22 hours on it so far.

      Comment on this reviewHelp Icon

      (1 of 1 customers found this review helpful)

       
      4.0

      Wonderful quality and price

      By 

      from Granville Ohio 43023

      About Me Acreage Owner

      Verified Buyer

      Pros

      • Cut Quality
      • Ease of Maintenance
      • Ease of Use
      • Engine Performance / Brand
      • Heavy Duty Construction
      • Speed
      • Steering / Controllability
      • Styling / Appearance
      • Zero-Turning Radius

      Cons

        Best Uses

        • Large Lawns (2+ acres)

        Comments about Exmark Pioneer S-Series:

        I cut about 5 acres and it is comfortable and fast

        Service and delivery comments:

        Same day delivery haven't had a problem yet wonderful service

        Comment on this reviewHelp Icon

         
        5.0

        This mower was a great purchase!

        By 

        from Chattanooga

        About Me Landscape Professional

        Verified Buyer

        Pros

        • Availability & Performance of Accessories
        • Comfort & Ergonomics
        • Cut Quality
        • Ease of Maintenance
        • Ease of Use
        • Engine Performance / Brand
        • Fuel Efficiency
        • Heavy Duty Construction
        • Speed
        • Steering / Controllability
        • Styling / Appearance
        • Zero-Turning Radius

        Cons

        • No fuel gauge

        Best Uses

        • Large Lawns (2+ acres)
        • Medium Lawns (1-2 acres)
        • Professional / Commercial Mowing
        • Small Lawns (Less than 1 acre)

        Comments about Exmark Pioneer S-Series:

        Pioneer s series is hands down a well built machine, from the very smooth hydro gears to the very powerful kohler engine. This mower is built to last. The cons or "issues" I have was with the fuel tank there's no fuel gauge? An one other thing I wish the kohler engine came with more of a commercial air filter. The one on it works fine but needs more maintenance.

        Service and delivery comments:

        Great service! I love my dealer! Great guys!

        Comment on this reviewHelp Icon

         
        5.0

        Very Happy with my Ex-Mark!!

        By 

        from Elberta, Alabama

        About Me Acreage Owner

        Verified Buyer

        Pros

        • Availability & Performance of Accessories
        • Comfort & Ergonomics
        • Cut Quality
        • Ease of Maintenance
        • Ease of Use
        • Engine Performance / Brand
        • Heavy Duty Construction
        • Speed
        • Steering / Controllability
        • Styling / Appearance
        • Zero-Turning Radius

        Cons

          Best Uses

          • Large Lawns (2+ acres)

          Comments about Exmark Pioneer S-Series:

          We have not had it long, but really enjoy our mower.

          Comment on this reviewHelp Icon

           
          4.0

          Good Mower

          By 

          from Jackson, MS

          About Me Homeowner

          Verified Buyer

          Pros

          • Comfort & Ergonomics
          • Cut Quality
          • Ease of Use
          • Steering / Controllability
          • Styling / Appearance

          Cons

          • Difficult Maintenance
          • Poor Fuel Efficiency

          Best Uses

          • Large Lawns (2+ acres)
          • Medium Lawns (1-2 acres)

          Comments about Exmark Pioneer S-Series:

          Good overall mower. I have an issue with the grease point for the deck being located in an area that is difficult to get to without special equipment. I also have an issue with the mower stalling out on hot days after mowing for a while.

          Service and delivery comments:

          Yes it arrived in good condition.

          Comment on this reviewHelp Icon

           
          5.0

          This is the most awesome mower I have ever owned.

          By 

          from Rockmart, Ga.

          About Me Acreage Owner, Grounds Manager, Homeowner

          Verified Buyer

          Pros

          • Comfort & Ergonomics
          • Cut Quality
          • Ease of Use
          • Engine Performance / Brand
          • Fuel Efficiency
          • Heavy Duty Construction
          • Most comfortable
          • Speed
          • Steering / Controllability
          • Styling / Appearance
          • Zero-Turning Radius

          Cons

            Best Uses

            • Large Lawns (2+ acres)
            • Mulching
            • Professional / Commercial Mowing
            • Striping

            Comments about Exmark Pioneer S-Series:

            I use my ex mark to cut my personal yard, my rental and my church.I honestly love it. Only one thing is that next time I'll buy the one with more shock absorbing.

            Service and delivery comments:

            All was good, haven't had to use any other services yet.

            Comment on this reviewHelp Icon

            (1 of 1 customers found this review helpful)

             
            5.0

            Very nice mower

            By 

            from Western Pa

            About Me Acreage Owner

            Pros

            • Comfort & Ergonomics
            • Cut Quality
            • Ease of Maintenance
            • Ease of Use
            • Heavy Duty Construction
            • Steering / Controllability
            • Styling / Appearance
            • Zero-Turning Radius

            Cons

            • Lack of Speed

            Best Uses

            • Medium Lawns (1-2 acres)
            • Professional / Commercial Mowing
            • Residential Mowing
            • Side Discharge

            Comments about Exmark Pioneer S-Series:

            Personal use on my lawn, almost 2 acres.Overall great mower. Have 62 hours so far on it with no issues. Bought it in 2013, just wish it had a little more mph .

            Service and delivery comments:

            I had no issues with my purchase, I bought my mower from a dealer 5 hrs away because I got a great deal and the local dealers around here couldn't touch the price I got it for by hundreds of dollars.

            Comment on this reviewHelp Icon

            (1 of 1 customers found this review helpful)

             
            5.0

            Great mower, durable and made really well.

            By 

            from Dallas, GA

            About Me Homeowner

            Verified Buyer

            Pros

            • Availability & Performance of Accessories
            • Comfort & Ergonomics
            • Cut Quality
            • Ease of Maintenance
            • Engine Performance / Brand
            • Heavy Duty Construction
            • Speed
            • Steering / Controllability
            • Zero-Turning Radius

            Cons

            • Poor Fuel Efficiency

            Best Uses

            • Bagging
            • Large Lawns (2+ acres)
            • Mulching
            • Residential Mowing

            Comments about Exmark Pioneer S-Series:

            Private property use. A fuel gauge would really be nice for the amount of money spent. Having to open a side mount gas cap and gazing in for fuel level is not ideal.

            Service and delivery comments:

            Dealer offered delivery if I didn't have an option for a trailer.

            Comment on this reviewHelp Icon

            Displaying reviews 1-10

            Back to top

            Previous | Next »