| Maintenance Service Interval |
Maintenance Procedure |
| |
LUBRICATION CHART |
| After the first 5 hours |
|
| After the first 100 hours |
- Check the wheel hub slotted nut torque specifications.
- Check the wheel lug nuts.
|
| After the first 250 hours |
- Change the hydraulic filter.
|
| Before each use or daily |
- Check the engine oil level.
- Check the mower blades.
- Check the safety interlock system.
- Check the rollover protection system (roll bar) pins.
- Check the seat belt.
- Check for loose hardware.
- Clean the engine cooling system.
- Clean the grass build-up from under the deck.
|
| Every 40 hours |
- Check the hydraulic oil level.
- Check the tire pressures.
- Check the condition of the belts.
- Grease the height adjustment shaft bearings.
- Grease deck rear struts.
|
| Every 50 hours |
- Service the air cleaner. (May need more often under severe conditions. See the Engine Owner’s Manual for additional information.)
|
| Every 100 hours |
- Change the engine oil. (May need more often under severe conditions.)
- Remove the engine shrouds and Clean the cooling fins.
|
| Every 160 hours |
- Lubricate the brake handle pivot.
- Lubricate the brake rod bushings.
- Lubricate the motion control bronze bushings.
- Lubricate the seat switch actuator.
- Check the spark plugs.
|
| Every 200 hours |
|
| Every 500 hours |
- Check the wheel hub slotted nut torque specifications.
- Check the wheel lug nuts.
|
| Monthly |
- Check the battery charge.
|
| Yearly |
- Grease the front caster wheel hubs.
- Grease front caster pivots.
- Grease the deck drive belt idler arm.
- Grease the pump drive belt idler arm.
- Lubricate the caster wheel hubs.
- Change the hydraulic filter.
|
