Javascript Menu by Deluxe-Menu.com
Home
|    Dealers Login|    Distributors Login    |   
Click for more!

Maintenance Schedule: Lazer Z® XS Liquid Cooled
Maintenance Service Interval Maintenance Procedure
  LUBRICATION CHART
After the first 5 hours
  • Change the engine oil.
After the first 100 hours
  • Check the wheel hub slotted nut torque specifications.
  • Check the wheel lug nuts.
After the first 250 hours
  • Change the hydraulic filter.
Before each use or daily
  • Check the engine oil level.
  • Check the mower blades.
  • Check the safety interlock system.
  • Check the rollover protections systems (roll bar) pins.
  • Check the seat belt.
  • Check for loose hardware.
  • Check engine coolant level.
  • Clean the engine cooling system.
  • Remove accumulated debris from engine.
  • Clean the grass build-up from under the deck.
Every 40 hours
  • Check the hydraulic oil level.
  • Check the tire pressures.
  • Check the condition of the belts.
  • Grease the height adjustment shaft bearings.
  • Grease the rear deck struts.
Every 50 hours
  • Service the air cleaner. (May need more often under severe conditions. See the Engine Owner’s Manual for additional information.)
  • Check spark arrester.
Every 100 hours
  • Change the engine oil. (May need more often under severe conditions.)
Every 160 hours
  • Lubricate the brake handle pivot.
  • Lubricate the brake rod bushings.
  • Lubricate the motion control bronze bushings.
  • Check the spark plugs.
Every 200 hours
  • Grease the brake brackets.
Every 500 hours
  • Check the wheel hub slotted nut torque specifications.
  • Check the wheel lug nuts.
Every 600 hours
  • Replace the air cleaner elements. (May need more often under severe conditions. See the Engine Owner’s Manual for additional information.)
Every 4,000 hours
  • Change engine coolant. Dex-Cool© extended life coolant (orange color)
Monthly
  • Check the battery charge
Yearly
  • Change the engine oil if operated less than 100 hours.
  • Grease the front caster wheel hubs.
  • Grease front caster pivots.
  • Grease the deck drive belt idler arm.
  • Grease the mule drive belt idler arm.
  • Grease the pump drive belt idler arm.
  • Lubricate the caster wheel hubs.
  • Change the hydraulic filter.
Note: Our operator’s manual details the steps and procedures for the above items.
           To download the operator’s manual, please click here.
ADJUSTMENTS
See operator’s manual. Click here to download the manual.