| Maintenance Service Interval |
Maintenance Procedure |
| |
LUBRICATION CHART |
| After the first 5 hours |
|
| After the first 100 hours |
- Check the wheel hub slotted nut torque specifications
- Check the wheel lug nuts
- Check the park brake adjustment
|
| Before each use or daily |
- Check the engine oil level.
- Check the mower blades
- Check the safety interlock system
- Check the rollover protections systems (roll bar) knobs.
- Check the seat belt
- Check for loose hardware.
- Clean the engine cooling system.
- Clean the grass build-up from under the cutting deck.
|
| Every 50 hours |
- Check the hydraulic oil level.
- Check the tire pressures
- Check the condition of the belts.
- Check spark arrester (if equipped)
|
| Every 100 hours |
- Change the engine oil. (May need more often under severe conditions.)
- Lubricate the deck lift pivots.
- Remove the engine shrouds and Clean the cooling fins.
|
| Every 200 hours |
- Service the air cleaner. (May need more often under severe conditions. See the Engine Owner’s Manual for additional information.)
- Lubricate the brake handle pivot.
- Check the spark plugs.
|
| Every 500 hours |
- Change the hydraulic filter and fluid.
- Check the wheel hub slotted nut torque specifications.
- Check the wheel lug nuts.
- Check the park brake adjustment.
|
| Yearly |
- Grease the deck and pump idler pivots.
- Grease the front caster pivots.
|
