LazerLockerFAQ

What do I do if my trailer is inspected by law enforcement personnel?

With each LazerLocker purchased, Exmark will provide you with a copy of the Department of Transportation’s Federal Motor Carrier Safety Administration requirements for protection against shifting and falling cargo (393 Subpart I).   To review those requirements in more detail, or to print an additional copy to have on hand in your vehicle in case of inspection, access the DOT’s website:

How many LazerLockers do I need per mower?

Each LazerLocker has a load capacity of 1,500 pounds. In most cases, only one is needed per mower.

How do I get my mower past the unit if I have more than one mower?

Depending on the width of your trailer and the size of your mower deck you usually don’t remove the LazerLockers at all.

Can I interchange units from the walk-behind size to the rider size?

Yes ,The new foot print for both units is the same so you use the Quick release pin and exchange units as you need to in just seconds.

Do I need any additional straps, ties or any other components when I use my LazerLockers?

No, one LazerLocker is all you need per piece of equipment. Drive in, and it automatically locks your equipment into place. Pull the quick-release pin and back out. It’s that simple….stop wasting time!

How difficult are the LazerLockers to install?

All of the mounting hardware and instructions are included in the box. Set the brackets on the deck where you would normally carry your equipment, drill your holes for the brackets that stay on your deck, and use the hardware that’s provided. It’s that simple.

Can the LazerLockers protect my equipment from theft?

To help you deter theft, LazerLockers have a pad-lock location on both left and right front corners of the base plate.

Why would I use LazerLockers rather than the tie-downs, straps, chains or chocking system I already have in place?

Because in your business, time is money. There is no faster load securement device available at any price. LazerLockers enable you to stay safe and legal quickly and easily from job site to job site. They have no loose parts to replace or maintain, and minimize damage to your equipment and trailers.