Javascript Menu by Deluxe-Menu.com
Home
|    Dealers Login|    Distributors Login    |   

Maintenance Schedule: FrontRunner™ Diesel
Maintenance Service Interval Maintenance Procedure
  LUBRICATION CHART
After the first 5 hours
  • Change the engine oil.
After the first 100 hours
  • Check the wheel hub locknuts torque specification.
After the first 250 hours
  • Change the hydraulic filter.
Before each use or daily
  • Check the engine oil level.
  • Check the engine coolant level.
  • Check the safety interlock system.
  • Check the rollover protections systems (roll bar) pins.
  • Check the seat belt.
  • Check for loose hardware.
  • Clean the engine cooling system.
Every 40 hours
  • Check the hydraulic oil level.
  • Check the tire pressures.
  • Check the condition of the belts.
  • Grease hitch and cylinder pivots.
  • Grease the dual tail wheel pivot.
Every 50 hours
  • Service the air cleaner. (May need more often under severe conditions. See the Engine Owner’s Manual for additional information.)
Every 100 hours
  • Change the engine oil. (May need more often under severe conditions.)
  • Grease the fold pivot pin.
Every 160 hours
  • Lubricate the brake handle pivot.
  • Lubricate the brake rod bushings.
  • Lubricate the motion control bronze bushings.
  • Lubricate the steering linkage rod ends.
Every 400 hours
  • Change the fuel filter.
Every 500 hours
  • Check the wheel hub locknuts torque specification.
Every 4,000 hours
  • Change engine coolant. Dex-Cool© extended life coolant (orange color)
Every 4,000 hours
  • Check the battery charge
Yearly
  • Grease the fold lock pin.
  • Grease the rear caster pivot.
  • Grease the belt idlers.
  • Grease the motion control pivots.
  • Grease the transfer spring ends.
  • Lubricate the caster wheel hub(s).
  • Lubricate the motion control shaft.
  • Change the hydraulic filter.

Recommended Maintenance Schedule FrontRunner Deck
Maintenance Service Interval Maintenance Procedure
After the first 50 hours
  • Change oil in all three gearbox housings.
       -Add oil as needed until level with oil drain plug.
Before each use or daily
  • Check the mower blades.
  • Check for loose hardware.
  • Grease the front caster wheel hub.
  • Clean the grass build-up from under the deck.
Every 40 hours
  • Check the condition of the belts.
  • Grease the drive shaft.
  • Grease the height adjustment shaft bearings.
Every 100 hours
  • Change oil in all three gearbox housings.
       -Add oil as needed until level with oil drain plug.
  • Grease the deck flip-up.
Yearly
  • Grease the front caster pivots.
  • Grease the deck drive belt idler arm.
Note: Our operator’s manual details the steps and procedures for the above items.
           To download the operator’s manual, please click here.
ADJUSTMENTS
See operator’s manual. Click here to download the manual.