|
|
Pioneer S-Series Specifications
|
(PNS600KA443) PIONEER S SERIES FX600V KAWASAKI ENGINE WITH 44" ULTRACUT SERIES 3 FABRICATED DECK
POWER COMPONENTS
| Engine: |
Kawasaki® |
| Model: |
FX600V |
| Displacement: |
600 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Hydro Gear ZT3100 hydrostatic transmission with charge pumps, relief valves, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components. |
| Speed: |
Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 175-ft-lb clutch |
| Fuel Capacity: |
7-gallon (26.5-L) single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.38" thick caster yoke arms |
| Cup Holder: |
Standard |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge top that is formed and welded with reinforcement/guard on leading edge. |
| Deck Style: |
Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
44" (111.76 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat. |
| Blades |
2 Blades at 22.25" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 2" square tublar steel. |
| Steering Control: |
Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment. |
| Front Caster Tires: |
13 x 5.0-6, smooth tread, pneumatic. |
| Drive Tires |
22 x 9.5-12 Super Turf® |
| Parking Brake |
Lever-actuated pawl brake. |
| Seat |
Commercial Grade High Back contoured foam padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft from Operators’ Position. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 15-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
822 lbs |
| Length: |
78 in. (198 cm) |
| Width: |
60 in. (152 cm) |
| Height: |
72 in. (183 cm) |
| Warranty: |
2 Year Comm / 4 Year Cons |
(PNS651KA483) PIONEER S SERIES FX651V KAWASAKI ENGINE WITH 48" ULTRACUT SERIES 3 FABRICATED DECK
POWER COMPONENTS
| Engine: |
Kawasaki® |
| Model: |
FX651V |
| Displacement: |
651 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Hydro Gear ZT3100 hydrostatic transmission with charge pumps, relief valves, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components. |
| Speed: |
Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 175-ft-lb clutch |
| Fuel Capacity: |
7-gallon (26.5-L) single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.38" thick caster yoke arms |
| Cup Holder: |
Standard |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. |
| Deck Style: |
Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
48" (121.92 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat. |
| Blades |
3 Blades at 16.25" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 2" square tublar steel. |
| Steering Control: |
Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment. |
| Front Caster Tires: |
13 x 5.0-6, smooth tread, pneumatic. |
| Drive Tires |
22 x 9.5-12 Super Turf® |
| Parking Brake |
Lever-actuated pawl brake. |
| Seat |
Commercial Grade High Back contoured foam padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft from Operators’ Position. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 15-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
862 lbs |
| Length: |
78 in. (198 cm) |
| Width: |
60 in. (152 cm) |
| Height: |
72 in. (183 cm) |
| Warranty: |
2 Year Comm / 4 Year Cons |
(PNS680KC523) PIONEER S SERIES CV680 KOHLER ENGINE WITH 52" ULTRACUT SERIES 3 FABRICATED DECK
POWER COMPONENTS
| Engine: |
Kohler® |
| Model: |
CV680 |
| Displacement: |
680 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Hydro Gear ZT3100 hydrostatic transmission with charge pumps, relief valves, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components. |
| Speed: |
Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 175-ft-lb clutch |
| Fuel Capacity: |
7-gallon (26.5-L) single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.38" thick caster yoke arms |
| Cup Holder: |
Standard |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. |
| Deck Style: |
Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
52" (132.08 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat. |
| Blades |
3 Blades at 18.00" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 2" square tublar steel. |
| Steering Control: |
Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment. |
| Front Caster Tires: |
13 x 5.0-6, smooth tread, pneumatic. |
| Drive Tires |
22 x 9.5-12 Super Turf® |
| Parking Brake |
Lever-actuated pawl brake. |
| Seat |
Commercial Grade High Back contoured foam padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft from Operators’ Position. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 15-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
868 lbs |
| Length: |
78 in. (198 cm) |
| Width: |
65 in. (165 cm) |
| Height: |
72 in. (183 cm) |
| Warranty: |
2 Year Comm / 4 Year Cons |
(PNS740KC604) PIONEER S SERIES CV740 KOHLER ENGINE WITH 60" ULTRACUT SERIES 4 FABRICATED DECK
POWER COMPONENTS
| Engine: |
Kohler® |
| Model: |
CV740 |
| Displacement: |
740 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. |
| Speed: |
Infinitely variable speed selection from 0–9.0 mph (14.5kmph) forward, 0–6.0 mph (9.7 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 200-ft-lb clutch |
| Fuel Capacity: |
7-gallon (26.5.-L) single fuel tank. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.38" thick caster yoke arms |
| Cup Holder: |
Standard |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
60" (152.4 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position via foot-operated, deck-lift system. |
| Blades |
3 Blades at 20.50" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 2" square tublar steel. |
| Steering Control: |
Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 3 height positions. |
| Front Caster Tires: |
13 x 5.0-6, smooth tread, pneumatic. |
| Drive Tires |
23 x 10.5-12 Super Turf® |
| Parking Brake |
Lever-actuated pawl brake. |
| Seat |
Commercial Grade High Back contoured foam padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft from Operators’ Position. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 15-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
948 lbs |
| Length: |
79 in. (200.2 cm) |
| Width: |
73 in. (185 cm) |
| Height: |
72 in. (183 cm) |
| Warranty: |
2 Year Comm / 4 Year Cons |
|
|