|
|
Lazer Z S-Series Specifications
|
(LZS651KA484) LAZER S SERIES FX651V KAWASAKI WITH 48" ULTRACUT SERIES 4 DECK
POWER COMPONENTS
| Engine: |
Kawasaki® |
| Model: |
FX651V |
| Displacement: |
651 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
| Speed: |
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 200-ft-lb clutch with spot brake |
| Fuel Capacity: |
12-gallon (45.4-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.50" thick caster yoke arms. |
| Cup Holder: |
Standard |
| CARB Compliant: |
Yes |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
48" (121.92 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
| Blades |
3 Blades at 16.25" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires: |
13 x 5.0-6, smooth-tread, semi-pneumatic. |
| Drive Tires |
23 x 9.5-12, Turf Master® |
| Parking Brake |
Lever-actuated disc brake. |
| Seat |
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 15-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
1093 lbs |
| Length: |
79.2 in. (201.2 cm) |
| Width: |
59.6 in. (151.4 cm) |
| Height: |
70 in. (177.8 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(LZS691KA524) LAZER S SERIES FX691V KAWASAKI WITH 52" ULTRACUT SERIES 4 DECK
POWER COMPONENTS
| Engine: |
Kawasaki® |
| Model: |
FS691V |
| Displacement: |
691 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
| Speed: |
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 200-ft-lb clutch with spot brake |
| Fuel Capacity: |
12-gallon (45.4-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.50" thick caster yoke arms. |
| Cup Holder: |
Standard |
| CARB Compliant: |
Yes |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
52" (132.08 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
| Blades |
3 Blades at 18.00" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires: |
13 x 5.0-6, smooth-tread, semi-pneumatic. |
| Drive Tires |
23 x 9.5-12, Turf Master® |
| Parking Brake |
Lever-actuated disc brake. |
| Seat |
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 15-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
1104 lbs |
| Length: |
79.2 in. (201.2 cm) |
| Width: |
64.8 in. (164.6 cm) |
| Height: |
70 in. (177.8 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(LZS730EKC524) LAZER S SERIES ECV730 EFI KOHLER WITH 52" ULTRACUT SERIES 4 DECK
POWER COMPONENTS
| Engine: |
Kohler® |
| Model: |
ECV730 |
| Displacement: |
730 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
| Speed: |
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 200-ft-lb clutch with spot brake |
| Fuel Capacity: |
12-gallon (45.4-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.50" thick caster yoke arms. |
| Cup Holder: |
Standard |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
52" (132.08 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
| Blades |
3 Blades at 18.00" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires: |
13 x 5.0-6, smooth-tread, semi-pneumatic. |
| Drive Tires |
23 x 9.5-12, Turf Master® |
| Parking Brake |
Lever-actuated disc brake. |
| Seat |
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 20-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
1133 lbs |
| Length: |
79.2 in. (201.2 cm) |
| Width: |
72.8 in. (184.9 cm) |
| Height: |
70 in. (177.8 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(LZS740KC604) LAZER S SERIES CV740 KOHLER WITH 60" ULTRACUT SERIES 4 DECK
POWER COMPONENTS
| Engine: |
Kohler® |
| Model: |
CV740 |
| Displacement: |
740 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
| Speed: |
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 200-ft-lb clutch with spot brake |
| Fuel Capacity: |
12-gallon (45.4-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.50" thick caster yoke arms. |
| Cup Holder: |
Standard |
| CARB Compliant: |
Yes |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
60" (152.4 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
| Blades |
3 Blades at 20.50" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires: |
13 x 6.5-6, smooth-tread, semi-pneumatic. |
| Drive Tires |
24 x 12-12, Turf Master® |
| Parking Brake |
Lever-actuated disc brake. |
| Seat |
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 15-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
1164 lbs |
| Length: |
83.1 in. (211.1 cm) |
| Width: |
72.8 in. (184.9 cm) |
| Height: |
70 in. (177.8 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(LZS740PKC604) LAZER S SERIES PCV740 KOHLER EFI WITH 60" ULTRACUT SERIES 4 DECK - PROPANE
POWER COMPONENTS
| Engine: |
Kohler® |
| Model: |
PCV740 |
| Displacement: |
740 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
| Speed: |
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 200-ft-lb clutch with spot brake |
| Fuel Capacity: |
10.3-gallon Propane tank |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.50" thick caster yoke arms. |
| Cup Holder: |
Standard |
| CARB Compliant: |
Yes |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
60" (152.4 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
| Blades |
3 Blades at 20.50" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires: |
13 x 5-6; smooth-tread, semi-pneumatic. |
| Drive Tires |
24 x 12-12, Turf Master® |
| Parking Brake |
Lever-actuated disc and caliper. |
| Seat |
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 20-amp alternator. |
MISCELLANEOUS
| Length: |
83.1 in. (211.1 cm) |
| Width: |
72.8 in. (184.9 cm) |
| Height: |
70 in. (177.8 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(LZS740PKC724) LAZER S SERIES PCV740 KOHLER EFI WITH 72" ULTRACUT SERIES 4 DECK - PROPANE
POWER COMPONENTS
| Engine: |
Kohler® |
| Model: |
PCV740 |
| Displacement: |
740 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
| Speed: |
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 200-ft-lb clutch with spot brake |
| Fuel Capacity: |
10.3-gallon Propane tank |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.50" thick caster yoke arms. |
| Cup Holder: |
Standard |
| CARB Compliant: |
Yes |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
72" (182.88 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
| Blades |
3 Blades at 24.50" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires: |
13 x 5-6; smooth-tread, semi-pneumatic |
| Drive Tires |
24 x 12-12, Turf Master® |
| Parking Brake |
Lever-actuated disc and caliper. |
| Seat |
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 20-amp alternator. |
MISCELLANEOUS
| Length: |
83.1 in. (211.1 cm) |
| Width: |
84.9 in. (215.6 cm) |
| Height: |
70 in. (177.8 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(LZS749EKC604) LAZER S SERIES ECV749 EFI KOHLER WITH 60" ULTRACUT SERIES 4 DECK
POWER COMPONENTS
| Engine: |
Kohler® |
| Model: |
ECV749 |
| Displacement: |
749 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
| Speed: |
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 200-ft-lb clutch with spot brake |
| Fuel Capacity: |
12-gallon (45.4-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.50" thick caster yoke arms. |
| Cup Holder: |
Standard |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
60" (152.4 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
| Blades |
3 Blades at 20.50" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires: |
13 x 6.5-6, smooth-tread, semi-pneumatic. |
| Drive Tires |
24 x 12-12, Turf Master® |
| Parking Brake |
Lever-actuated disc brake. |
| Seat |
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 20-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
1177 lbs |
| Length: |
83.1 in. (211.1 cm) |
| Width: |
84.9 in. (215.6 cm) |
| Height: |
70 in. (177.8 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(LZS749EKC724) LAZER S SERIES ECV749 EFI KOHLER WITH 72" ULTRACUT SERIES 4 DECK
POWER COMPONENTS
| Engine: |
Kohler® |
| Model: |
ECV749 |
| Displacement: |
749 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
| Speed: |
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 200-ft-lb clutch with spot brake |
| Fuel Capacity: |
12-gallon (45.4-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.50" thick caster yoke arms. |
| Cup Holder: |
Standard |
| CARB Compliant: |
Yes |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
72" (182.88 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
| Blades |
3 Blades at 24.50" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires: |
13 x 6.5-6, smooth-tread, semi-pneumatic. |
| Drive Tires |
24 x 12-12, Turf Master® |
| Parking Brake |
Lever-actuated disc brake. |
| Seat |
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 20-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
1220 lbs |
| Length: |
86.1 in. (218.7 cm) |
| Width: |
84.9 in. (215.6 cm) |
| Height: |
70 in. (177.8 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(LZS801KA524) LAZER S SERIES FX801V KAWASAKI WITH 52" ULTRACUT SERIES 4 DECK
POWER COMPONENTS
| Engine: |
Kawasaki® |
| Model: |
FX801V |
| Displacement: |
801 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
| Speed: |
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 200-ft-lb clutch with spot brake |
| Fuel Capacity: |
12-gallon (45.4-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.50" thick caster yoke arms. |
| Cup Holder: |
Standard |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
52" (132.08 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
| Blades |
3 Blades at 18.00" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires: |
13 x 5.0-6, smooth-tread, semi-pneumatic. |
| Drive Tires |
23 x 9.5-12, Turf Master® |
| Parking Brake |
Lever-actuated disc brake. |
| Seat |
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 15-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
1134 lbs |
| Length: |
79.2 in. (201.2 cm) |
| Width: |
64.8 in. (164.6 cm) |
| Height: |
70 in. (177.8 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(LZS801KA604) LAZER S SERIES FX801V KAWASAKI WITH 60" ULTRACUT SERIES 4 DECK
POWER COMPONENTS
| Engine: |
Kawasaki® |
| Model: |
FX801V |
| Displacement: |
801 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
| Speed: |
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 200-ft-lb clutch with spot brake |
| Fuel Capacity: |
12-gallon (45.4-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.50" thick caster yoke arms. |
| Cup Holder: |
Standard |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
60" (152.4 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
| Blades |
3 Blades at 20.50" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires: |
13 x 6.5-6, smooth-tread, semi-pneumatic. |
| Drive Tires |
24 x 12-12, Turf Master® |
| Parking Brake |
Lever-actuated disc brake. |
| Seat |
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 20-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
1177 lbs |
| Length: |
83.1 in. (211.1 cm) |
| Width: |
84.9 in. (215.6 cm) |
| Height: |
70 in. (177.8 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
(LZS801KA724) LAZER S SERIES FX801V KAWASAKI WITH 72" ULTRACUT SERIES 4 DECK
POWER COMPONENTS
| Engine: |
Kawasaki® |
| Model: |
FX801V |
| Displacement: |
801 |
| Air Filter: |
Heavy-duty canister air filtration system |
| Drive System: |
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
| Speed: |
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse. |
| PTO Engagement: |
MagStop electromagnetic 200-ft-lb clutch with spot brake |
| Fuel Capacity: |
12-gallon (45.4-L), single fuel tank with single fill location. |
| Drive Wheel Release: |
Allows unit movement without engine running. |
| Safety Package: |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Rollover Protection System (ROPS): |
2-post foldable ROPS standard with seat belt and latch. |
| Casters: |
.50" thick caster yoke arms. |
| Cup Holder: |
Standard |
| CARB Compliant: |
No |
DECKS
| Deck Construction: |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Deck Style: |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width: |
72" (182.88 cm) |
| Deck Lift: |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
| Blades |
3 Blades at 24.50" Length |
| Blade-Tip Speed |
Approximately 18,500 fpm. |
EQUIPMENT
| Tractor Frame: |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control: |
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires: |
13 x 6.5-6, smooth-tread, semi-pneumatic. |
| Drive Tires |
24 x 12-12, Turf Master® |
| Parking Brake |
Lever-actuated disc brake. |
| Seat |
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 15-amp alternator. |
MISCELLANEOUS
| Curb Weight: |
1208 lbs |
| Length: |
86.1 in. (218.7 cm) |
| Width: |
84.9 in. (215.6 cm) |
| Height: |
70 in. (177.8 cm) |
| Warranty: |
3 Year Comm / 5 Year Cons |
|
|