SHOP
Recent Innovations
Dealer Locator
Current Promotions
Financing Options
Leasing Program
Get Brochure
Request Demo
Not Sure What to Buy
Compare Mowers
Exmark Advantage
Mower Productivity Chart
Product Specifications
Propane Powered Equipment
Maintenance Schedule: Lazer Z® Advantage Series
  LUBRICATION CHART
After the first 5 hours
  • Change the engine oil.
After the first 100 hours
  • Check the wheel hub slotted nut torque specifications.
  • Check the wheel lug nuts.
After the first 250 hours
  • Change the hydraulic filter.
Before each use or daily
  • Check the engine oil level.
  • Check the mower blades.
  • Check the safety interlock system.
  • Check the rollover protections systems (roll bar) pins.
  • Check the seat belt.
  • Check for loose hardware.
  • Clean the engine cooling system.
  • Remove accumulated debris from engine.
  • Clean the grass build-up from under the deck.
Every 40 hours
  • Check the hydraulic oil level.
  • Check the tire pressures.
  • Check the condition of the belts.
  • Grease the height adjustment shaft bearings.
  • Grease the rear deck struts.
Every 50 hours
  • Service the air cleaner. (May need more often under severe conditions. See the Engine Owner’s Manual for additional information.)
Every 80 hours
  • Remove the engine shrouds and Clean the cooling fins.
Every 100 hours
  • Change the engine oil. (May need more often under severe conditions.)
Every 160 hours
  • Lubricate the brake handle pivot.
  • Lubricate the brake rod bushings.
  • Lubricate the motion control bronze bushings.
  • Lubricate the seat switch actuator.
  • Check the spark plugs.
Every 200 hours
  • Grease the brake brackets.
Every 500 hours
  • Check the wheel hub slotted nut torque specifications.
  • Check the wheel lug nuts.
Monthly
  • Check the battery charge.
Yearly
  • Lubricate the caster wheel hubs.
  • Grease front caster pivots.
  • Grease the deck drive belt idler arm.
  • Grease the mule drive belt idler arm.
  • Grease the pump drive belt idler arm.
  • Lubricate the caster wheel hubs.
  • Change the hydraulic filter.
Note: Our operator’s manual details the steps and procedures for the above items.
           To download the operator’s manual, please click here.


Parts Look-Up