Maintenance Schedule: FrontRunner™ Air Cooled
|
|
LUBRICATION CHART
|
|
After the first 5 hours
|
|
|
After the first 100 hours
|
-
Check the wheel hub locknuts torque specification.
|
|
After the first 250 hours
|
-
Change the hydraulic filter.
|
|
Before each use or daily
|
- Check the engine oil level.
- Check the safety interlock system.
- Check the rollover protections systems (roll bar) pins.
- Check the seat belt.
- Check for loose hardware.
- Clean the engine cooling system.
-
Remove accumulated debris from engine.
|
|
Every 40 hours
|
- Check the hydraulic oil level.
- Check the tire pressures.
- Check the condition of the belts.
- Grease hitch and cylinder pivots.
-
Grease the dual tail wheel pivot (if applicable).
|
|
Every 50 hours
|
-
Service the air cleaner. (May need more often under severe conditions. See the Engine
Owner’s Manual for additional information.)
|
|
Every 80 hours
|
-
Remove the engine shrouds and Clean the cooling fins.
|
|
Every 100 hours
|
- Change the engine oil. (May need more often under severe conditions.)
-
Grease the fold pivot pin.
|
|
Every 160 hours
|
- Lubricate the brake handle pivot.
- Lubricate the brake rod bushings.
- Lubricate the motion control bronze bushings.
- Lubricate the steering linkage rod ends.
-
Check the spark plugs.
|
|
Every 500 hours
|
-
Check the wheel hub locknuts torque specification.
|
|
Monthly
|
-
Check the battery charge.
|
|
Yearly
|
- Grease the fold lock pin.
- Grease the rear caster pivot.
- Grease the belt idlers.
- Grease the motion control pivots.
- Grease the transfer spring ends.
- Lubricate the caster wheel hub(s)
- Lubricate the motion control shaft.
-
Change the hydraulic filter.
|
|
After the first 50 hours
|
- Change oil in all three gearbox housings.
-Add oil as needed until level with oil drain plug.
|
|
Before each use or daily
|
- Check the mower blades.
- Check for loose hardware.
- Grease the front caster wheel hub.
-
Clean the grass build-up from under the deck.
|
|
Every 40 hours
|
- Check the condition of the belts.
- Grease the drive shaft.
-
Grease the height adjustment shaft bearings.
|
|
Every 100 hours
|
- Change oil in all three gearbox housings.
-Add oil as needed until level with oil drain plug.
-
Grease the deck flip-up.
|
|
Yearly
|
- Grease the front caster pivots.
-
Grease the deck drive belt idler arm.
|
|
Note: Our operator’s manual details the steps and procedures for the above
items.
To download the
operator’s manual, please click here.
|
|
|
|
|