|
|
Cutting System: Decks
ULTRACUT SERIES 6 DECK
Standard on Lazer Z® X-Series Models.
- 5.5" deck depth.
- No maintenance, sealed and non-greasable spindles
- 7.75"-diameter cutter housing with 1.75"-diameter splined
blade driver and 30mm (1.18" ) diameter spindle shaft.
- Patented spherical bearing design on idler arm pivots
requires only annual greasing.
- Coned anti-scalp rollers.
Features:
- 5.5" deck depth. 4-point suspension. Full-floating.
- (3) 7-gauge steel reinforcement rings at spindle
mounting area on 48," 52," 60" & 72."
- High-strength polymer belt covers.
- Coned anti-scalp rollers.
- 10-gauge steel top.
- 7-gauge steel side skirt.
- Heavy-duty trim side wear guard excludes 48" models.
- No maintenance spindles and sealed and nongreasable.
- 7.75" diameter cutter housing with
1.75"-diameter splined blade driver and 30mm (1.18")
diameter spindle shaft.
- 18,500 fpm blade tip speed.
- Patented flow-control baffles.
- Patented spherical bearing design on idler arms
requires only annual greasing.
- No-maintenance, sealed ball bearings.
- Flexible discharge chute reduces impact damage of
trees and other obstacles.
ULTRACUT REAR DISCHARGE DECK
Standard on Lazer Z® DS-Series REAR DISCHARGE.
- 5.5" deck depth.
- 7-gauge high-strenghth low-alloy top plate and side-skirts.
- No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined
blade driver and 30mm (1.18" ) diameter spindle shaft.
- Counter rotating blade provides even cliping dispersion.
- Durable through axle anti-scalp rollers.
- Optional finish cut bafles.
Features:
- 5.5" deck depth. 4-point suspension. Full-floating.
- 7-gauge high-strenghth low alloy deck construction.
- High-strength polymer belt covers.
- Reinforced anti-scalp rollers.
- Compression molded UHMW side bumper protects deck and follows ground contours.
- No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined
blade driver and 30mm (1.18" ) diameter spindle shaft.
- 18,500 fpm blade tip speed.
- Patented spherical bearing design on idler arms
requires only annual greasing.
- 10-gauge steel top.
- 7-gauge steel side skirt.
- No maintenance sealed ball bearings.
SERIES 5 DECK
Standard on Lazer Z® DS -Series Models.
- 6.0" deck depth.
- 10-gauge top reinforcement plate and 7-gauge
reinforcement rings.
- No maintenance, sealed and non-greasable spindles;
- 7.75"-diameter cutter housing with 1.75"-diameter
splined blade driver and 30mm (1.18") diameter
spindle shaft.
- Patented flow-control baffles.
- Adjustable discharge baffle.
- Coned anti-scalp rollers.
Features:
- 6.0" deck depth. 4-point suspension. Full-floating.
- 10-gauge top reinforcement plate and (3) 7-gauge steel reinforcement rings at spindle mounting area.
- No maintenance spindles and sealed and nongreasable. 7.75" diameter cutter housing with 1.75" diameter splined blade driver and 30mm (1.18") diameter spindle shaft.
- Adjustable front blow-out/vacuum baffle.
- Adjustable discharge baffle.
- Metal belt covers.
- Coned anti-scalp rollers.
- 10-gauge steel top.
- 7-gauge steel side skirt.
- Heavy-duty trim side wear guard
- Patented flow-control baffles.
- Patented spherical bearing design on idler arms
requires only annual greasing.
- Flexible discharge chute reduces impact damage of trees and other obstacles.
- 18,500 fpm blade tip speed.
- No-maintenance, sealed ball bearings.
ULTRACUT SERIES 4 DECK
Standard on Lazer Z® S-Series, Lazer Z E-Series, Pioneer S-Series 60", Turf Tr acer® X-Series and Vantage® 48," 52" & 60" models.
- 5.5" deck depth.
- Three large, formed and welded 7-gauge steel
reinforcement rings on top of 60" & 72" decks provide
superior strength and durability excludes LZE 48" & 52" models.
- Lazer Z S-Series, Pioneer S-Series, & Vantage - No
maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm- (.98")
diameter spindle shaft and splined blade driver.
- Turf Tracer X-Series - No maintenance, sealed and nongreasable
spindles. 5.40"-diameter cutter housing with
1.75" diameter splined blade driver and 1.0" diameter
spindle shaft.
- Patented spherical bearing design on idler-arm pivots
requires only annual greasing.
- No-maintenance, sealed ball bearings.
Features:
- 5.5" deck depth. 4-point suspension. Full-floating.
- 10-gauge steel top.
- 7-gauge steel side skirt.
- 7-gauge steel reinforcement rings at spindle
mounting area (excludes LZE 48" & 52" models).
- Heavy-duty trim side wear guard (excludes 48" models).
- Lazer Z S-Series, Lazer Z E-Series, Pioneer S-Series,& Vantage - No maintenance spindles and sealed and nongreasable. 7.75"-diameter cutter housing with 25mm-(.98") diameter spindle shaft and splined blade driver.
Turf Tracer X-Series - No maintenance, sealed and nongreasable
spindles. 5.40"-diameter cutter housing with 1.75"-diameter splined blade driver and 1.0"-diameter spindle shaft.
- 18,500 fpm blade tip speed.
- Patented flow-control baffles.
- Patented spherical bearing design on idler arms requires
only annual greasing.
- High-strength polymer belt covers.
- No-maintenance, sealed ball bearings.
- Flexible discharge chute reduces impact damage of
trees and other obstacles.
- Round anti-scalp rollers.
ULTRACUT SERIES 3 DECK
Standard on Pioneer® S-Series 44," 48" & 52" And Vantage® 36" model.
- 5.0" deck depth provides Exmark's signature cut.
- Sealed, greaseless spindles require no maintenance year-round.
- 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver.
- 10-gauge steel reinforcement plate on Vantage 36"
Standard on Turf Tracer® S-Series model.
- 5.0" deck depth delivers unmatched cut quality.
- Sealed, greaseless spindles require no maintenance
year-round.
- 5.40"-diameter cutter housing with 1.75"-diameter
splined blade driver and 1.0" diameter spindle.
- 7-gauge steel reinforcement
Standard on Viking™ 48" and Metro® 48" models.
- 5.0" deck depth, adjusts providing flexibility for
varying cutting heights.
- Sealed, greaseless spindles.
- 5.40"-diameter cutter housing and 1.0"-diameter
spindle tube.
- (3) 7-gauge steel reinforcement rings at spindle
mounting area.
Features:
- 5.0" deck depth. 4-point suspension. Full-floating.
- 10-gauge steel top.
- 7-gauge steel side skirt.
- 7-gauge steel reinforcement rings at spindle mounting
excludes Pioneer S-Series and Vantage 36" model.
- Pioneer S-Series 44," 48" & 52" and Vantage 36" - 7.75"-diameter cutter housing with 25mm- (.98")
diameter spindle shaft and splined blade driver.
- Turf Tracer S-Series - 5.40"-diameter cutter housing
with 1.75"-diameter .splined blade driver and 1.0" diameter spindle.
- Viking 48" and Metro 48" - 5.40"-diameter cutter
housing and 1.0"-diameter spindle tube.
- 18,500 fpm blade tip speed.
- Patented flow-control baffles.
- High-strength polymer belt covers standard on
Pioneer S-Series 48" & 52" models.
- No-maintenance, sealed ball bearings.
- Flexible discharge chute reduces impact damage of
trees and other obstacles.
- Round anti-scalp rollers.
ULTRACUT SERIES 2 DECK
Standard on Pioneer® E-Series model.
- 4.0" deck depth provides patented airflow technology.
- Sealed, greaseless spindles require no maintenance
year-round.
- 7.50"-diameter cutter housing contains 17mm- (.67")
diameter spindle shaft and hex blade driver.
Standard on Viking™ 36" and Metro® 32" & 36" models.
- 5.0" deck depth, adjusts providing flexibility for
varying cutting heights.
- Sealed, greaseless spindles require no maintenance
year-round.
- 5.40"-diameter cutter housing and 1.0"-diameter
spindle tube.
- (2) 7-gauge steel reinforcement rings at spindle
mounting area.
Features:
- Pioneer E-Series - 4.0" deck depth. 4-point suspension.
Full-floating.
- Viking 36" and Metro 32" & 36" - 5.0" deck depth. Rigid.
- 10-gauge steel top.
- Pioneer E-Series - 10-gauge steel side skirt.
- Viking 36" and Metro 32" & 36" - 7-gauge steel side
skirt.
- Pioneer E-Series - 7.50"-diameter cutter housing
contains 17mm- (.67") diameter spindle shaft and hex
blade driver.
- Viking 36" and Metro 32" & 36" - 5.40"-diameter cutter
housing and 1.0"-diameter spindle tube.
- 18,500 fpm blade tip speed.
- Patented flow-control baffles.
- High-strength polymer belt covers are standard on
Pioneer E-Series.
- No-maintenance, sealed ball bearings.
- Flexible discharge chute reduces impact damage of
trees and other obstacles.
- Round anti-scalp rollers.
SERIES 1 & SERIES 2 DECKS
Standard ON Quest® E-Series and Quest S-Series
- 4.0" deck depth with top discharge design.
- Top discharge design enhances bagging performance.
- Sealed, greaseless spindles require no maintenance
year-round.
- 5.50"-diameter cutter housing with 17mm-diameter
spindle shaft.
- Easily removable for cleaning and service.
Series 1 Stamped Deck Features. Standard on Quest E-Series.
- 4.0"-deck depth. 3-point suspension. Floating.
- 42" unit - 2 blade, 13-gauge stamped steel.
- 50" unit - 3 blade, 12-gauge stamped steel
- Rolled deck edges for additional strength.
- 5.50"-diameter cutter housing with 17mm-diameter
spindle shaft. Sealed, greaseless spindle bearings
require no maintenance year-round.
- 18,500 fpm blade tip speed.
- Composite discharge chute reduces impact damage of
trees and other obstacles.
- Round anti-scalp rollers.
- Clean-out port.
Series 2 Fabricated Deck Features.
Standard on Quest S-Series.
- 4.0"-deck depth. 3-point suspension. Floating.
- 3 blade, 10-gauge top that is formed and welded,
12-gauge side skirt and 7-gauge welded front bumper.
- 5.50"-diameter cutter housing with 17mm-diameter
spindle shaft. Sealed, greaseless spindle bearings
require no maintenance year-round.
- 18,500 fpm blade tip speed.
- Composite discharge chute reduces impact damage of
trees and other obstacles.
- Round anti-scalp rollers.
- Clean-out port.
It doesn’t matter how much experience you have. It doesn’t matter how many hours you clocked in the field. If the cut doesn’t look good, you’re done. That’s why we worked hard in perfecting our cutting decks. Let’s take a look inside: The patented fl ow-control baffl es accelerate airfl ow under the deck, resulting in the easy movement of materials and a more even discharge. We’ve optimized the blade-tip speed, which optimizes discharge distance and uniformity. All the components in our deck work together to deliver a standout cut, job after job after job.
|